dri-devel Archive on lore.kernel.org
 help / color / mirror / Atom feed
From: sashiko-bot@kernel.org
To: "Gilles Risch" <gilles.risch@gmail.com>
Cc: dri-devel@lists.freedesktop.org
Subject: Re: [PATCH v6] drm/radeon: fix internal display on iMac11, 1 (RV770/DCE3.1)
Date: Mon, 17 Aug 2026 00:50:56 +0000	[thread overview]
Message-ID: <20260817005056.E061C1F000E9@smtp.kernel.org> (raw)
In-Reply-To: <20260817004326.3192-1-gilles.risch@gmail.com>

Thank you for your contribution! Sashiko AI review found 1 potential issue(s) to consider:
- [Medium] Missing ATOM_ENCODER_CMD_DP_VIDEO_OFF for iMac11,1 in DPMS disable path
--

--- Patch [1]: [PATCH v6] drm/radeon: fix internal display on iMac11, 1  (RV770/DCE3.1) ---
commit 6714fa0de0a69a7e28cd2cf7fe610715f038e79d
Author: Gilles Risch <gilles.risch@gmail.com>
drm/radeon: fix internal display on iMac11, 1 (RV770/DCE3.1)

This commit adds a DMI quirk to route the iMac11,1 internal display
through Link B of the DIG encoder. It also sets the FRAC_FB_DIV PLL flag
and enables DP_VIDEO_ON explicitly for this hardware to fix a blank screen
issue.

> diff --git a/drivers/gpu/drm/radeon/atombios_encoders.c b/drivers/gpu/drm/radeon/atombios_encoders.c
> --- a/drivers/gpu/drm/radeon/atombios_encoders.c
> +++ b/drivers/gpu/drm/radeon/atombios_encoders.c

[ ... ]

> @@ -1707,7 +1707,7 @@ radeon_atom_encoder_dpms_dig(struct drm_encoder *encoder, int mode)
>  		if (ENCODER_MODE_IS_DP(atombios_get_encoder_mode(encoder)) && connector) {
>  			/* DP_SET_POWER_D0 is set in radeon_dp_link_train */
>  			radeon_dp_link_train(encoder, connector);
> -			if (ASIC_IS_DCE4(rdev))
> +			if (ASIC_IS_DCE4(rdev) || dmi_match(DMI_PRODUCT_NAME, "iMac11,1"))
>  				atombios_dig_encoder_setup(encoder, ATOM_ENCODER_CMD_DP_VIDEO_ON, 0);
>  		}

[Severity: Medium]
Should the corresponding disable paths (standby, suspend, off) also
include the iMac11,1 DMI check for turning the video off?

Later in radeon_atom_encoder_dpms_dig(), the ATOM_ENCODER_CMD_DP_VIDEO_OFF
command is only sent if ASIC_IS_DCE4(rdev):

    case DRM_MODE_DPMS_STANDBY:
    case DRM_MODE_DPMS_SUSPEND:
    case DRM_MODE_DPMS_OFF:

        if (ASIC_IS_DCE4(rdev)) {
            if (ENCODER_MODE_IS_DP(atombios_get_encoder_mode(encoder)) && connector)
                atombios_dig_encoder_setup(encoder, ATOM_ENCODER_CMD_DP_VIDEO_OFF, 0);
        }

Does the iMac11,1 (which is DCE3.1) need ATOM_ENCODER_CMD_DP_VIDEO_OFF
sent here to properly stop the stream before the link is disabled?

-- 
Sashiko AI review · https://sashiko.dev/#/patchset/20260817004326.3192-1-gilles.risch@gmail.com?part=1

  reply	other threads:[~2026-08-17  0:50 UTC|newest]

Thread overview: 29+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2026-05-10 18:54 [PATCH] The Apple iMac11, 1 (late 2009) has an integrated ATI Mobility Radeon HD 4850. This machine suffers from a similar problem as the iMac10, 1 (late 2009) and the iMac11, 2 (mid 2010). This small patch fixes the issue on this machine Gilles Risch
2026-05-16  9:24 ` [PATCH v2] drm/radeon: fix internal display on iMac11, 1 (RV770/DCE3.1) Gilles Risch
2026-05-16 18:09   ` Lukas Wunner
2026-05-17 13:53     ` Gilles Risch
2026-05-17 14:05       ` Lukas Wunner
2026-05-16 18:52   ` [PATCH] drm/radeon: fix eDP resume from suspend on iMac11, 1 / DCE3.1 systems Gilles Risch
2026-05-17  3:28     ` kernel test robot
2026-05-17  5:12     ` kernel test robot
2026-05-18 14:13     ` Alex Deucher
2026-05-18 14:40       ` Gilles Risch
2026-05-18 14:57         ` Alex Deucher
2026-05-18 21:14           ` [PATCH v3 0/2] drm/radeon: fix iMac11,1 dark display Gilles Risch
2026-05-18 21:14           ` [PATCH v3 1/2] drm/radeon: fix internal display on iMac11, 1 (RV770/DCE3.1) Gilles Risch
2026-05-19 13:35             ` Alex Deucher
2026-05-18 21:14           ` [PATCH v3 2/2] drm/radeon: fix eDP resume from suspend on iMac11, 1 / DCE3.1 systems Gilles Risch
2026-05-19 13:42             ` Alex Deucher
2026-05-27 22:20               ` [PATCH v4] drm/radeon: fix internal display on iMac11, 1 (RV770/DCE3.1) Gilles Risch
2026-05-28 18:53                 ` Alex Deucher
2026-05-29  7:43                   ` Gilles Risch
2026-05-29 13:31                     ` Alex Deucher
2026-06-01 21:19                       ` [PATCH v5] " Gilles Risch
2026-07-11  8:41                         ` [PATCH v5] drm/radeon: fix internal display on iMac11,1 (RV770/DCE3.1) Gilles Risch
2026-08-17  0:43                           ` [PATCH v6] drm/radeon: fix internal display on iMac11, 1 (RV770/DCE3.1) Gilles Risch
2026-08-17  0:50                             ` sashiko-bot [this message]
2026-08-17  8:25                             ` [PATCH v6] drm/radeon: fix internal display on iMac11,1 (RV770/DCE3.1) Lukas Wunner
2026-08-17 15:09                             ` [PATCH v6] drm/radeon: fix internal display on iMac11, 1 (RV770/DCE3.1) Alex Deucher
     [not found]                         ` <010001a01df94f48-3026542f-b8eb-4661-868e-1d35cfd0254b-000000@email.amazonses.com>
2026-08-20 13:24                           ` [PATCH v5] " Alex Deucher
2026-08-20 18:59                             ` [PATCH v5] drm/radeon: fix internal display on iMac11,1 (RV770/DCE3.1) Gilles Risch
2026-08-20 19:34                               ` [PATCH v5] drm/radeon: fix internal display on iMac11, 1 (RV770/DCE3.1) Alex Deucher

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20260817005056.E061C1F000E9@smtp.kernel.org \
    --to=sashiko-bot@kernel.org \
    --cc=dri-devel@lists.freedesktop.org \
    --cc=gilles.risch@gmail.com \
    --cc=sashiko-reviews@lists.linux.dev \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox