dri-devel Archive on lore.kernel.org
 help / color / mirror / Atom feed
From: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
To: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Cc: Ulrich Hecht <ulrich.hecht+renesas@gmail.com>,
	linux-renesas-soc@vger.kernel.org,
	dri-devel@lists.freedesktop.org
Subject: Re: [PATCH 0/5] R-Car D3 LVDS/HDMI support
Date: Tue, 22 May 2018 19:50:24 +0300	[thread overview]
Message-ID: <2229387.Idfvy4ikAn@avalon> (raw)
In-Reply-To: <1907232.cqk6dk4XdZ@avalon>

Hi Ulrich,

On Sunday, 20 May 2018 11:27:02 EEST Laurent Pinchart wrote:
> On Tuesday, 15 May 2018 15:20:35 EEST Ulrich Hecht wrote:
> > Hi!
> > 
> > This adds D3 support to the DU and LVDS drivers, not including LVDS PLL
> > support.
> > 
> > It also adds LVDS encoders to the D3 device tree, and LVDS decoder, HDMI
> > encoder and HDMI output connector to the Draak device tree.
> > 
> > In theory that should be good enough to provide HDMI output on the Draak
> > board, but in practice the lack of LVDS PLL support prevents generation of
> > close-enough dot clock frequencies.
> > 
> > This series is based on renesas-drivers-2018-05-02-v4.17-rc3 and requires
> > Jacopo's "drm: bridge: Add thc63lvd1024 LVDS decoder driver" patch.
> 
> As HDMI output isn't functional yet this is difficult to test. Could you add
> support for the VGA output (using the DU DPAD) in v2 of the patch series ?
> VGA should work without LVDS PLL support as the clock frequency
> requirements are not as strict as for HDMI.

*sigh* I should really refrain from writing e-mails when I'm jetlagged :-/ VGA 
is already supported, there's nothing to be done there. Sorry for the noise. 

> > Kieran Bingham (1):
> >   arm64: dts: renesas: r8a77995: Add LVDS support
> > 
> > Koji Matsuoka (1):
> >   drm: rcar-du: Add r8a77995 device support
> > 
> > Ulrich Hecht (3):
> >   drm: rcar-du: lvds: Add R8A77995 support
> >   arm64: dts: renesas: r8a77995-draak: add HDMI output
> >   arm64: dts: renesas: r8a77995-draak: add X12 input dot clock
> >  
> >  arch/arm64/boot/dts/renesas/r8a77995-draak.dts | 91 +++++++++++++++++++++
> >  arch/arm64/boot/dts/renesas/r8a77995.dtsi      | 56 ++++++++++++++++
> >  drivers/gpu/drm/rcar-du/rcar_du_drv.c          | 26 ++++++++
> >  drivers/gpu/drm/rcar-du/rcar_lvds.c            |  6 ++
> >  4 files changed, 179 insertions(+)

-- 
Regards,

Laurent Pinchart



_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel

      reply	other threads:[~2018-05-22 16:50 UTC|newest]

Thread overview: 26+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2018-05-15 12:20 [PATCH 0/5] R-Car D3 LVDS/HDMI support Ulrich Hecht
2018-05-15 12:20 ` [PATCH 1/5] drm: rcar-du: Add r8a77995 device support Ulrich Hecht
2018-05-16  8:03   ` Simon Horman
2018-05-20  8:22   ` Laurent Pinchart
2018-05-15 12:20 ` [PATCH 2/5] drm: rcar-du: lvds: Add R8A77995 support Ulrich Hecht
2018-05-16  7:54   ` Simon Horman
2018-05-16  8:59     ` Sergei Shtylyov
2018-05-16 13:06       ` Ulrich Hecht
2018-05-16 17:07         ` Sergei Shtylyov
2018-05-17  8:59       ` Simon Horman
2018-05-20  8:45   ` Laurent Pinchart
2018-05-15 12:20 ` [PATCH 3/5] arm64: dts: renesas: r8a77995: Add LVDS support Ulrich Hecht
2018-05-16  8:16   ` Simon Horman
2018-05-20  8:50   ` Laurent Pinchart
2018-05-22 12:00     ` Geert Uytterhoeven
2018-08-01 10:35   ` jacopo mondi
2018-08-01 11:59     ` Ulrich Hecht
2018-05-15 12:20 ` [PATCH 4/5] arm64: dts: renesas: r8a77995-draak: add HDMI output Ulrich Hecht
2018-05-16  8:35   ` Simon Horman
2018-05-20  8:52   ` Laurent Pinchart
2018-05-15 12:20 ` [PATCH 5/5] arm64: dts: renesas: r8a77995-draak: add X12 input dot clock Ulrich Hecht
2018-05-16  8:38   ` Simon Horman
2018-05-20  8:58     ` Laurent Pinchart
2018-05-22  8:58       ` Simon Horman
2018-05-20  8:27 ` [PATCH 0/5] R-Car D3 LVDS/HDMI support Laurent Pinchart
2018-05-22 16:50   ` Laurent Pinchart [this message]

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=2229387.Idfvy4ikAn@avalon \
    --to=laurent.pinchart@ideasonboard.com \
    --cc=dri-devel@lists.freedesktop.org \
    --cc=linux-renesas-soc@vger.kernel.org \
    --cc=ulrich.hecht+renesas@gmail.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox