inuz-3.3.3 root=/dev/sda5 ro
BIOS-provided physical RAM map:
 BIOS-e820: 0000000000000000 - 000000000009bc00 (usable)
 BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved)
 BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
 BIOS-e820: 0000000000100000 - 00000000dfff0000 (usable)
 BIOS-e820: 00000000dfff0000 - 00000000dfff3000 (ACPI NVS)
 BIOS-e820: 00000000dfff3000 - 00000000e0000000 (ACPI data)
 BIOS-e820: 00000000f0000000 - 00000000f2000000 (reserved)
 BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved)
 BIOS-e820: 0000000100000000 - 0000000120000000 (usable)
NX (Execute Disable) protection: active
DMI 2.3 present.
DMI:    /GA-M55PLUS-S3G, BIOS F12 05/22/2007
e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
No AGP bridge found
last_pfn = 0x120000 max_arch_pfn = 0x400000000
MTRR default type: uncachable
MTRR fixed ranges enabled:
  00000-9FFFF write-back
  A0000-BFFFF uncachable
  C0000-C7FFF write-protect
  C8000-EFFFF uncachable
  F0000-FFFFF write-through
MTRR variable ranges enabled:
  0 base 0000000000 mask FF80000000 write-back
  1 base 0080000000 mask FFC0000000 write-back
  2 base 00C0000000 mask FFE0000000 write-back
  3 base 0100000000 mask FFE0000000 write-back
  4 disabled
  5 disabled
  6 disabled
  7 disabled
TOM2: 0000000120000000 aka 4608M
x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
e820 update range: 00000000e0000000 - 0000000100000000 (usable) ==> (reserved)
last_pfn = 0xdfff0 max_arch_pfn = 0x400000000
found SMP MP-table at [ffff8800000f4e20] f4e20
initial memory mapped : 0 - 20000000
Base memory trampoline at [ffff880000096000] 96000 size 20480
init_memory_mapping: 0000000000000000-00000000dfff0000
 0000000000 - 00dfe00000 page 2M
 00dfe00000 - 00dfff0000 page 4k
kernel direct mapping tables up to dfff0000 @ 1fffa000-20000000
init_memory_mapping: 0000000100000000-0000000120000000
 0100000000 - 0120000000 page 2M
kernel direct mapping tables up to 120000000 @ dffea000-dfff0000
ACPI: RSDP 00000000000f67d0 00014 (v00 GBT   )
ACPI: RSDT 00000000dfff3000 00034 (v01 GBT    NVDAACPI 42302E31 NVDA 01010101)
ACPI: FACP 00000000dfff3040 00074 (v01 GBT    NVDAACPI 42302E31 NVDA 01010101)
ACPI: DSDT 00000000dfff30c0 04911 (v01 GBT    NVDAACPI 00001000 MSFT 0100000C)
ACPI: FACS 00000000dfff0000 00040
ACPI: SSDT 00000000dfff7a80 00206 (v01 PTLTD  POWERNOW 00000001  LTP 00000001)
ACPI: MCFG 00000000dfff7cc0 0003C (v01 GBT    NVDAACPI 42302E31 NVDA 01010101)
ACPI: APIC 00000000dfff7a00 00072 (v01 GBT    NVDAACPI 42302E31 NVDA 01010101)
ACPI: Local APIC address 0xfee00000
 [ffffea0000000000-ffffea0003ffffff] PMD -> [ffff88011b600000-ffff88011effffff] on node 0
Zone PFN ranges:
  DMA      0x00000010 -> 0x00001000
  DMA32    0x00001000 -> 0x00100000
  Normal   0x00100000 -> 0x00120000
Movable zone start PFN for each node
Early memory PFN ranges
    0: 0x00000010 -> 0x0000009b
    0: 0x00000100 -> 0x000dfff0
    0: 0x00100000 -> 0x00120000
On node 0 totalpages: 1048443
  DMA zone: 56 pages used for memmap
  DMA zone: 5 pages reserved
  DMA zone: 3918 pages, LIFO batch:0
  DMA32 zone: 14280 pages used for memmap
  DMA32 zone: 899112 pages, LIFO batch:31
  Normal zone: 1792 pages used for memmap
  Normal zone: 129280 pages, LIFO batch:31
Nvidia board detected. Ignoring ACPI timer override.
If you got timer trouble try acpi_use_timer_override
Detected use of extended apic ids on hypertransport bus
ACPI: PM-Timer IO Port: 0x1008
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
ACPI: LAPIC_NMI (acpi_id[0x00] dfl dfl lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x01] dfl dfl lint[0x1])
ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 2, version 17, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: INT_SRC_OVR (bus 0 bus_irq 14 global_irq 14 high edge)
ACPI: INT_SRC_OVR (bus 0 bus_irq 15 global_irq 15 high edge)
ACPI: IRQ9 used by override.
ACPI: IRQ14 used by override.
ACPI: IRQ15 used by override.
Using ACPI (MADT) for SMP configuration information
SMP: Allowing 2 CPUs, 0 hotplug CPUs
nr_irqs_gsi: 40
Allocating PCI resources starting at e0000000 (gap: e0000000:10000000)
setup_percpu: NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:2 nr_node_ids:1
PERCPU: Embedded 25 pages/cpu @ffff88011fc00000 s69824 r8192 d24384 u1048576
pcpu-alloc: s69824 r8192 d24384 u1048576 alloc=1*2097152
pcpu-alloc: [0] 0 1 
Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 1032310
Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.3.3 root=/dev/sda5 ro
PID hash table entries: 4096 (order: 3, 32768 bytes)
Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
Checking aperture...
No AGP bridge found
Node 0: aperture @ d4000000 size 32 MB
Aperture pointing to e820 RAM. Ignoring.
Your BIOS doesn't leave a aperture memory hole
Please enable the IOMMU option in the BIOS setup
This costs you 64 MB of RAM
Mapping aperture over 65536 KB of RAM @ d4000000
Memory: 3991348k/4718592k available (2914k kernel code, 524820k absent, 202424k reserved, 1298k data, 432k init)
Preemptible hierarchical RCU implementation.
NR_IRQS:4352 nr_irqs:512 16
spurious 8259A interrupt: IRQ7.
Console: colour VGA+ 80x25
console [tty0] enabled
Fast TSC calibration using PIT
Detected 2209.862 MHz processor.
Marking TSC unstable due to TSCs unsynchronized
Calibrating delay loop (skipped), value calculated using timer frequency.. 4419.72 BogoMIPS (lpj=8839448)
pid_max: default: 32768 minimum: 301
Security Framework initialized
Mount-cache hash table entries: 256
tseg: 0000000000
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
mce: CPU supports 5 MCE banks
using AMD E400 aware idle routine
ACPI: Core revision 20120111
..TIMER: vector=0x30 apic1=0 pin1=0 apic2=-1 pin2=-1
CPU0: AMD Athlon(tm) 64 X2 Dual Core Processor 4200+ stepping 02
Performance Events: AMD PMU driver.
... version:                0
... bit width:              48
... generic registers:      4
... value mask:             0000ffffffffffff
... max period:             00007fffffffffff
... fixed-purpose events:   0
... event mask:             000000000000000f
Booting Node   0, Processors  #1 Ok.
smpboot cpu 1: start_ip = 96000
Brought up 2 CPUs
Total of 2 processors activated (8840.11 BogoMIPS).
devtmpfs: initialized
PM: Registering ACPI NVS region at dfff0000 (12288 bytes)
NET: Registered protocol family 16
node 0 link 0: io port [3000, fffff]
TOM: 00000000e0000000 aka 3584M
node 0 link 0: mmio [f0000000, f1ffffff]
node 0 link 0: mmio [a0000, bffff]
node 0 link 0: mmio [e0000000, ffb7ffff]
TOM2: 0000000120000000 aka 4608M
bus: [00, ff] on node 0 link 0
bus: 00 index 0 [io  0x0000-0xffff]
bus: 00 index 1 [mem 0xe0000000-0xffffffff]
bus: 00 index 2 [mem 0x000a0000-0x000bffff]
bus: 00 index 3 [mem 0x120000000-0xfcffffffff]
ACPI: bus type pci registered
PCI: MMCONFIG for domain 0000 [bus 00-1f] at [mem 0xf0000000-0xf1ffffff] (base 0xf0000000)
PCI: MMCONFIG at [mem 0xf0000000-0xf1ffffff] reserved in E820
PCI: Using configuration type 1 for base access
bio: create slab <bio-0> at 0
ACPI: Added _OSI(Module Device)
ACPI: Added _OSI(Processor Device)
ACPI: Added _OSI(3.0 _SCP Extensions)
ACPI: Added _OSI(Processor Aggregator Device)
ACPI: EC: Look up EC in DSDT
ACPI: Interpreter enabled
ACPI: (supports S0 S1 S5)
ACPI: Using IOAPIC for interrupt routing
PCI: Ignoring host bridge windows from ACPI; if necessary, use "pci=use_crs" and report a bug
ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-1f])
pci_root PNP0A08:00: host bridge window [io  0x0000-0x0cf7] (ignored)
pci_root PNP0A08:00: host bridge window [io  0x0d00-0xffff] (ignored)
pci_root PNP0A08:00: host bridge window [mem 0x000a0000-0x000bffff] (ignored)
pci_root PNP0A08:00: host bridge window [mem 0x000c0000-0x000dffff] (ignored)
pci_root PNP0A08:00: host bridge window [mem 0xfed40000-0xfed44fff] (ignored)
pci_root PNP0A08:00: host bridge window [mem 0xe0000000-0xfebfffff] (ignored)
PCI: root bus 00: hardware-probed resources
PCI host bridge to bus 0000:00
pci_bus 0000:00: root bus resource [io  0x0000-0xffff]
pci_bus 0000:00: root bus resource [mem 0xe0000000-0xffffffff]
pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
pci_bus 0000:00: root bus resource [mem 0x120000000-0xfcffffffff]
pci 0000:00:00.0: [10de:02f5] type 0 class 0x000500
pci 0000:00:00.1: [10de:02fa] type 0 class 0x000500
pci 0000:00:00.2: [10de:02fe] type 0 class 0x000500
pci 0000:00:00.3: [10de:02f8] type 0 class 0x000500
pci 0000:00:00.4: [10de:02f9] type 0 class 0x000500
pci 0000:00:00.5: [10de:02ff] type 0 class 0x000500
pci 0000:00:00.6: [10de:027f] type 0 class 0x000500
pci 0000:00:00.7: [10de:027e] type 0 class 0x000500
pci 0000:00:04.0: [10de:02fb] type 1 class 0x000604
pci 0000:00:04.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:09.0: [10de:0270] type 0 class 0x000500
pci 0000:00:0a.0: [10de:0260] type 0 class 0x000601
HPET not enabled in BIOS. You might try hpet=force boot option
pci 0000:00:0a.1: [10de:0264] type 0 class 0x000c05
pci 0000:00:0a.1: reg 20: [io  0x1c00-0x1c3f]
pci 0000:00:0a.1: reg 24: [io  0x1c80-0x1cbf]
pci 0000:00:0a.1: PME# supported from D3hot D3cold
pci 0000:00:0a.2: [10de:0272] type 0 class 0x000500
pci 0000:00:0b.0: [10de:026d] type 0 class 0x000c03
pci 0000:00:0b.0: reg 10: [mem 0xf4105000-0xf4105fff]
pci 0000:00:0b.0: supports D1 D2
pci 0000:00:0b.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:0b.1: [10de:026e] type 0 class 0x000c03
pci 0000:00:0b.1: reg 10: [mem 0xf4106000-0xf41060ff]
pci 0000:00:0b.1: supports D1 D2
pci 0000:00:0b.1: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:0d.0: [10de:0265] type 0 class 0x000101
pci 0000:00:0d.0: reg 20: [io  0xf000-0xf00f]
pci 0000:00:0e.0: [10de:0266] type 0 class 0x000101
pci 0000:00:0e.0: reg 10: [io  0x09f0-0x09f7]
pci 0000:00:0e.0: reg 14: [io  0x0bf0-0x0bf3]
pci 0000:00:0e.0: reg 18: [io  0x0970-0x0977]
pci 0000:00:0e.0: reg 1c: [io  0x0b70-0x0b73]
pci 0000:00:0e.0: reg 20: [io  0xd400-0xd40f]
pci 0000:00:0e.0: reg 24: [mem 0xf4104000-0xf4104fff]
pci 0000:00:0f.0: [10de:0267] type 0 class 0x000101
pci 0000:00:0f.0: reg 10: [io  0x09e0-0x09e7]
pci 0000:00:0f.0: reg 14: [io  0x0be0-0x0be3]
pci 0000:00:0f.0: reg 18: [io  0x0960-0x0967]
pci 0000:00:0f.0: reg 1c: [io  0x0b60-0x0b63]
pci 0000:00:0f.0: reg 20: [io  0xc000-0xc00f]
pci 0000:00:0f.0: reg 24: [mem 0xf4108000-0xf4108fff]
pci 0000:00:10.0: [10de:026f] type 1 class 0x000604
pci 0000:00:10.1: [10de:026c] type 0 class 0x000403
pci 0000:00:10.1: reg 10: [mem 0xf4100000-0xf4103fff]
pci 0000:00:10.1: PME# supported from D3hot D3cold
pci 0000:00:14.0: [10de:0269] type 0 class 0x000680
pci 0000:00:14.0: reg 10: [mem 0xf4107000-0xf4107fff]
pci 0000:00:14.0: reg 14: [io  0xe000-0xe007]
pci 0000:00:14.0: supports D1 D2
pci 0000:00:14.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:18.0: [1022:1100] type 0 class 0x000600
pci 0000:00:18.1: [1022:1101] type 0 class 0x000600
pci 0000:00:18.2: [1022:1102] type 0 class 0x000600
pci 0000:00:18.3: [1022:1103] type 0 class 0x000600
pci 0000:02:00.0: [1002:9498] type 0 class 0x000300
pci 0000:02:00.0: reg 10: [mem 0xe0000000-0xefffffff 64bit pref]
pci 0000:02:00.0: reg 18: [mem 0xf3000000-0xf300ffff 64bit]
pci 0000:02:00.0: reg 20: [io  0xa000-0xa0ff]
pci 0000:02:00.0: reg 30: [mem 0x00000000-0x0001ffff pref]
pci 0000:02:00.0: supports D1 D2
pci 0000:02:00.1: [1002:aa38] type 0 class 0x000403
pci 0000:02:00.1: reg 10: [mem 0xf3010000-0xf3013fff 64bit]
pci 0000:02:00.1: supports D1 D2
pci 0000:00:04.0: PCI bridge to [bus 02-02]
pci 0000:00:04.0:   bridge window [io  0xa000-0xafff]
pci 0000:00:04.0:   bridge window [mem 0xf2000000-0xf3ffffff]
pci 0000:00:04.0:   bridge window [mem 0xe0000000-0xefffffff 64bit pref]
pci 0000:01:07.0: [1023:2000] type 0 class 0x000401
pci 0000:01:07.0: reg 10: [io  0x9000-0x90ff]
pci 0000:01:07.0: reg 14: [mem 0xf4005000-0xf4005fff]
pci 0000:01:07.0: supports D1 D2
pci 0000:01:0e.0: [104c:8024] type 0 class 0x000c00
pci 0000:01:0e.0: reg 10: [mem 0xf4004000-0xf40047ff]
pci 0000:01:0e.0: reg 14: [mem 0xf4000000-0xf4003fff]
pci 0000:01:0e.0: supports D1 D2
pci 0000:01:0e.0: PME# supported from D0 D1 D2 D3hot
pci 0000:00:10.0: PCI bridge to [bus 01-01] (subtractive decode)
pci 0000:00:10.0:   bridge window [io  0x9000-0x9fff]
pci 0000:00:10.0:   bridge window [mem 0xf4000000-0xf40fffff]
pci 0000:00:10.0:   bridge window [io  0x0000-0xffff] (subtractive decode)
pci 0000:00:10.0:   bridge window [mem 0xe0000000-0xffffffff] (subtractive decode)
pci 0000:00:10.0:   bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
pci 0000:00:10.0:   bridge window [mem 0x120000000-0xfcffffffff] (subtractive decode)
pci_bus 0000:00: on NUMA node 0
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HUB0._PRT]
 pci0000:00: Requesting ACPI _OSC control (0x1d)
 pci0000:00: ACPI _OSC request failed (AE_NOT_FOUND), returned control mask: 0x1d
ACPI _OSC control for PCIe not granted, disabling ASPM
ACPI: PCI Interrupt Link [LNK1] (IRQs 5 7 9 10 11 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNK2] (IRQs 5 7 9 *10 11 14 15)
ACPI: PCI Interrupt Link [LNK3] (IRQs 5 7 9 *10 11 14 15)
ACPI: PCI Interrupt Link [LNK4] (IRQs 5 7 9 10 11 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNK5] (IRQs 5 7 9 10 *11 14 15)
ACPI: PCI Interrupt Link [LNK6] (IRQs *5 7 9 10 11 14 15)
ACPI: PCI Interrupt Link [LNK7] (IRQs 5 7 9 10 11 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNK8] (IRQs 5 7 9 10 11 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LUBA] (IRQs *5 7 9 10 11 14 15)
ACPI: PCI Interrupt Link [LUBB] (IRQs 5 7 9 10 11 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LMAC] (IRQs *5 7 9 10 11 14 15)
ACPI: PCI Interrupt Link [LACI] (IRQs 5 7 9 10 11 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LAZA] (IRQs 5 7 9 10 *11 14 15)
ACPI: PCI Interrupt Link [LPMU] (IRQs 5 7 9 10 11 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LMCI] (IRQs 5 7 9 10 11 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LSMB] (IRQs 5 7 9 *10 11 14 15)
ACPI: PCI Interrupt Link [LUB2] (IRQs 5 7 9 10 *11 14 15)
ACPI: PCI Interrupt Link [LIDE] (IRQs 5 7 9 10 11 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LSID] (IRQs 5 7 9 *10 11 14 15)
ACPI: PCI Interrupt Link [LFID] (IRQs 5 7 9 10 *11 14 15)
ACPI: PCI Interrupt Link [APC1] (IRQs 16) *0, disabled.
ACPI: PCI Interrupt Link [APC2] (IRQs 17) *0
ACPI: PCI Interrupt Link [APC3] (IRQs 18) *0
ACPI: PCI Interrupt Link [APC4] (IRQs 19) *0, disabled.
ACPI: PCI Interrupt Link [APC5] (IRQs 16) *0
ACPI: PCI Interrupt Link [APC6] (IRQs 16) *0
ACPI: PCI Interrupt Link [APC7] (IRQs 16) *0, disabled.
ACPI: PCI Interrupt Link [APC8] (IRQs 16) *0, disabled.
ACPI: PCI Interrupt Link [APCF] (IRQs 20 21 22 23) *0
ACPI: PCI Interrupt Link [APCG] (IRQs 20 21 22 23) *0, disabled.
ACPI: PCI Interrupt Link [APCH] (IRQs 20 21 22 23) *0
ACPI: PCI Interrupt Link [APCJ] (IRQs 20 21 22 23) *0, disabled.
ACPI: PCI Interrupt Link [APMU] (IRQs 20 21 22 23) *0, disabled.
ACPI: PCI Interrupt Link [AAZA] (IRQs 20 21 22 23) *0
ACPI: PCI Interrupt Link [APCK] (IRQs 20 21 22 23) *0, disabled.
ACPI: PCI Interrupt Link [APCS] (IRQs 20 21 22 23) *0
ACPI: PCI Interrupt Link [APCL] (IRQs 20 21 22 23) *0
ACPI: PCI Interrupt Link [APCM] (IRQs 20 21 22 23) *0, disabled.
ACPI: PCI Interrupt Link [APCZ] (IRQs 20 21 22 23) *0, disabled.
ACPI: PCI Interrupt Link [APSI] (IRQs 20 21 22 23) *0
ACPI: PCI Interrupt Link [APSJ] (IRQs 20 21 22 23) *0
vgaarb: device added: PCI:0000:02:00.0,decodes=io+mem,owns=io+mem,locks=none
vgaarb: loaded
vgaarb: bridge control possible 0000:02:00.0
SCSI subsystem initialized
libata version 3.00 loaded.
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
PCI: Using ACPI for IRQ routing
PCI: pci_cache_line_size set to 64 bytes
reserve RAM buffer: 000000000009bc00 - 000000000009ffff 
reserve RAM buffer: 00000000dfff0000 - 00000000dfffffff 
pnp: PnP ACPI init
ACPI: bus type pnp registered
pnp 00:00: [bus 00-1f]
pnp 00:00: [io  0x0cf8-0x0cff]
pnp 00:00: [io  0x0000-0x0cf7 window]
pnp 00:00: [io  0x0d00-0xffff window]
pnp 00:00: [mem 0x000a0000-0x000bffff window]
pnp 00:00: [mem 0x000c0000-0x000dffff window]
pnp 00:00: [mem 0xfed40000-0xfed44fff window]
pnp 00:00: [mem 0xe0000000-0xfebfffff window]
pnp 00:00: Plug and Play ACPI device, IDs PNP0a08 PNP0a03 (active)
pnp 00:01: [io  0x1000-0x107f]
pnp 00:01: [io  0x1080-0x10ff]
pnp 00:01: [io  0x1400-0x147f]
pnp 00:01: [io  0x1480-0x14ff]
pnp 00:01: [io  0x1800-0x187f]
pnp 00:01: [io  0x1880-0x18ff]
pnp 00:01: [mem 0xfefe0000-0xfefe01ff]
pnp 00:01: [mem 0x00000000-0xffffffffffffffff disabled]
pnp 00:01: [io  0x2000-0x207f]
pnp 00:01: [io  0x2080-0x20ff]
system 00:01: [io  0x1000-0x107f] has been reserved
system 00:01: [io  0x1080-0x10ff] has been reserved
system 00:01: [io  0x1400-0x147f] has been reserved
system 00:01: [io  0x1480-0x14ff] has been reserved
system 00:01: [io  0x1800-0x187f] has been reserved
system 00:01: [io  0x1880-0x18ff] has been reserved
system 00:01: [io  0x2000-0x207f] has been reserved
system 00:01: [io  0x2080-0x20ff] has been reserved
system 00:01: [mem 0xfefe0000-0xfefe01ff] has been reserved
system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:02: [io  0x0010-0x001f]
pnp 00:02: [io  0x0022-0x003f]
pnp 00:02: [io  0x0044-0x004d]
pnp 00:02: [io  0x0050-0x005f]
pnp 00:02: [io  0x0062-0x0063]
pnp 00:02: [io  0x0065-0x006f]
pnp 00:02: [io  0x0074-0x007f]
pnp 00:02: [io  0x0091-0x0093]
pnp 00:02: [io  0x00a2-0x00bf]
pnp 00:02: [io  0x00e0-0x00ef]
pnp 00:02: [io  0x04d0-0x04d1]
pnp 00:02: [io  0x0800-0x087f]
pnp 00:02: [io  0x0295-0x0314]
pnp 00:02: [io  0x0290-0x0294]
system 00:02: [io  0x04d0-0x04d1] has been reserved
system 00:02: [io  0x0800-0x087f] has been reserved
system 00:02: [io  0x0295-0x0314] has been reserved
system 00:02: [io  0x0290-0x0294] has been reserved
system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:03: [dma 4]
pnp 00:03: [io  0x0000-0x000f]
pnp 00:03: [io  0x0080-0x0090]
pnp 00:03: [io  0x0094-0x009f]
pnp 00:03: [io  0x00c0-0x00df]
pnp 00:03: Plug and Play ACPI device, IDs PNP0200 (active)
pnp 00:04: [io  0x0070-0x0073]
pnp 00:04: [irq 8]
pnp 00:04: Plug and Play ACPI device, IDs PNP0b00 (active)
pnp 00:05: [io  0x0061]
pnp 00:05: Plug and Play ACPI device, IDs PNP0800 (active)
pnp 00:06: [io  0x00f0-0x00ff]
pnp 00:06: [irq 13]
pnp 00:06: Plug and Play ACPI device, IDs PNP0c04 (active)
pnp 00:07: [io  0x03f8-0x03ff]
pnp 00:07: [irq 4]
pnp 00:07: Plug and Play ACPI device, IDs PNP0501 (active)
pnp 00:08: [io  0x0378-0x037f]
pnp 00:08: [io  0x0778-0x077b]
pnp 00:08: [irq 7]
pnp 00:08: [dma 3]
pnp 00:08: Plug and Play ACPI device, IDs PNP0401 (active)
pnp 00:09: [mem 0xf0000000-0xf1ffffff]
system 00:09: [mem 0xf0000000-0xf1ffffff] has been reserved
system 00:09: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:0a: [mem 0x000d0000-0x000d3fff]
pnp 00:0a: [mem 0x000f0000-0x000f7fff]
pnp 00:0a: [mem 0x000f8000-0x000fbfff]
pnp 00:0a: [mem 0x000fc000-0x000fffff]
pnp 00:0a: [mem 0xdfff0000-0xdfffffff]
pnp 00:0a: [mem 0xffff0000-0xffffffff]
pnp 00:0a: [mem 0x00000000-0x0009ffff]
pnp 00:0a: [mem 0x00100000-0xdffeffff]
pnp 00:0a: [mem 0x00000000-0xffffffffffffffff disabled]
pnp 00:0a: [mem 0xfec00000-0xfec00fff]
pnp 00:0a: [mem 0xfee00000-0xfee00fff]
system 00:0a: [mem 0x000d0000-0x000d3fff] has been reserved
system 00:0a: [mem 0x000f0000-0x000f7fff] could not be reserved
system 00:0a: [mem 0x000f8000-0x000fbfff] could not be reserved
system 00:0a: [mem 0x000fc000-0x000fffff] could not be reserved
system 00:0a: [mem 0xdfff0000-0xdfffffff] could not be reserved
system 00:0a: [mem 0xffff0000-0xffffffff] has been reserved
system 00:0a: [mem 0x00000000-0x0009ffff] could not be reserved
system 00:0a: [mem 0x00100000-0xdffeffff] could not be reserved
system 00:0a: [mem 0xfec00000-0xfec00fff] could not be reserved
system 00:0a: [mem 0xfee00000-0xfee00fff] has been reserved
system 00:0a: Plug and Play ACPI device, IDs PNP0c01 (active)
pnp: PnP ACPI: found 11 devices
ACPI: ACPI bus type pnp unregistered
Switching to clocksource acpi_pm
PCI: max bus depth: 1 pci_try_num: 2
pci 0000:02:00.0: BAR 6: assigned [mem 0xf2000000-0xf201ffff pref]
pci 0000:00:04.0: PCI bridge to [bus 02-02]
pci 0000:00:04.0:   bridge window [io  0xa000-0xafff]
pci 0000:00:04.0:   bridge window [mem 0xf2000000-0xf3ffffff]
pci 0000:00:04.0:   bridge window [mem 0xe0000000-0xefffffff 64bit pref]
pci 0000:00:10.0: PCI bridge to [bus 01-01]
pci 0000:00:10.0:   bridge window [io  0x9000-0x9fff]
pci 0000:00:10.0:   bridge window [mem 0xf4000000-0xf40fffff]
pci 0000:00:10.0: setting latency timer to 64
pci_bus 0000:00: resource 4 [io  0x0000-0xffff]
pci_bus 0000:00: resource 5 [mem 0xe0000000-0xffffffff]
pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
pci_bus 0000:00: resource 7 [mem 0x120000000-0xfcffffffff]
pci_bus 0000:02: resource 0 [io  0xa000-0xafff]
pci_bus 0000:02: resource 1 [mem 0xf2000000-0xf3ffffff]
pci_bus 0000:02: resource 2 [mem 0xe0000000-0xefffffff 64bit pref]
pci_bus 0000:01: resource 0 [io  0x9000-0x9fff]
pci_bus 0000:01: resource 1 [mem 0xf4000000-0xf40fffff]
pci_bus 0000:01: resource 4 [io  0x0000-0xffff]
pci_bus 0000:01: resource 5 [mem 0xe0000000-0xffffffff]
pci_bus 0000:01: resource 6 [mem 0x000a0000-0x000bffff]
pci_bus 0000:01: resource 7 [mem 0x120000000-0xfcffffffff]
NET: Registered protocol family 2
IP route cache hash table entries: 131072 (order: 8, 1048576 bytes)
TCP established hash table entries: 262144 (order: 10, 4194304 bytes)
TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
TCP: Hash tables configured (established 262144 bind 65536)
TCP reno registered
UDP hash table entries: 2048 (order: 4, 65536 bytes)
UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
NET: Registered protocol family 1
pci 0000:00:00.0: Found enabled HT MSI Mapping
ACPI: PCI Interrupt Link [APCF] enabled at IRQ 23
ACPI: PCI Interrupt Link [APCL] enabled at IRQ 22
pci 0000:00:09.0: Found disabled HT MSI Mapping
pci 0000:00:0e.0: Enabling HT MSI Mapping
pci 0000:00:09.0: Found disabled HT MSI Mapping
pci 0000:00:0f.0: Enabling HT MSI Mapping
pci 0000:00:09.0: Found disabled HT MSI Mapping
pci 0000:00:10.0: Enabling HT MSI Mapping
pci 0000:00:09.0: Found disabled HT MSI Mapping
pci 0000:00:10.1: Enabling HT MSI Mapping
pci 0000:02:00.0: Boot video device
PCI: CLS 32 bytes, default 64
PCI-DMA: Disabling AGP.
PCI-DMA: aperture base @ d4000000 size 65536 KB
PCI-DMA: using GART IOMMU.
PCI-DMA: Reserving 64MB of IOMMU area in the AGP aperture
msgmni has been set to 7924
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
io scheduler noop registered
io scheduler cfq registered (default)
pcieport 0000:00:04.0: irq 40 for MSI/MSI-X
Linux agpgart interface v0.103
loop: module loaded
sata_nv 0000:00:0e.0: version 3.5
ACPI: PCI Interrupt Link [APSI] enabled at IRQ 21
sata_nv 0000:00:0e.0: Using SWNCQ mode
sata_nv 0000:00:0e.0: setting latency timer to 64
scsi0 : sata_nv
scsi1 : sata_nv
ata1: SATA max UDMA/133 cmd 0x9f0 ctl 0xbf0 bmdma 0xd400 irq 21
ata2: SATA max UDMA/133 cmd 0x970 ctl 0xb70 bmdma 0xd408 irq 21
ACPI: PCI Interrupt Link [APSJ] enabled at IRQ 20
sata_nv 0000:00:0f.0: Using SWNCQ mode
sata_nv 0000:00:0f.0: setting latency timer to 64
scsi2 : sata_nv
scsi3 : sata_nv
ata3: SATA max UDMA/133 cmd 0x9e0 ctl 0xbe0 bmdma 0xc000 irq 20
ata4: SATA max UDMA/133 cmd 0x960 ctl 0xb60 bmdma 0xc008 irq 20
pata_amd 0000:00:0d.0: version 0.4.1
pata_amd 0000:00:0d.0: setting latency timer to 64
scsi4 : pata_amd
scsi5 : pata_amd
ata5: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xf000 irq 14
ata6: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0xf008 irq 15
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci_hcd 0000:00:0b.1: setting latency timer to 64
ehci_hcd 0000:00:0b.1: EHCI Host Controller
ehci_hcd 0000:00:0b.1: new USB bus registered, assigned bus number 1
ehci_hcd 0000:00:0b.1: debug port 1
ehci_hcd 0000:00:0b.1: cache line size of 32 is not supported
ehci_hcd 0000:00:0b.1: irq 22, io mem 0xf4106000
ehci_hcd 0000:00:0b.1: USB 2.0 started, EHCI 1.00
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 8 ports detected
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
ohci_hcd 0000:00:0b.0: setting latency timer to 64
ohci_hcd 0000:00:0b.0: OHCI Host Controller
ohci_hcd 0000:00:0b.0: new USB bus registered, assigned bus number 2
ohci_hcd 0000:00:0b.0: irq 23, io mem 0xf4105000
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 8 ports detected
usbcore: registered new interface driver libusual
i8042: PNP: No PS/2 controller found. Probing ports directly.
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mousedev: PS/2 mouse device common for all mice
rtc_cmos 00:04: RTC can wake from S4
rtc_cmos 00:04: rtc core: registered rtc_cmos as rtc0
rtc0: alarms up to one year, y3k, 242 bytes nvram
cpuidle: using governor ladder
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
TCP cubic registered
rtc_cmos 00:04: setting system clock to 2012-04-23 07:37:00 UTC (1335166620)
BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
EDD information not available.
ata5.00: HPA detected: current 312579695, native 312581808
ata5.00: ATA-7: ST3160212ACE, 3.ACB, max UDMA/100
ata5.00: 312579695 sectors, multi 16: LBA48 
ata5: nv_mode_filter: 0x3f39f&0x3f39f->0x3f39f, BIOS=0x3f000 (0xc600c000) ACPI=0x3f01f (20:600:0x13)
ata5.00: configured for UDMA/100
ata3: SATA link down (SStatus 0 SControl 300)
usb 1-2: new high-speed USB device number 3 using ehci_hcd
ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata1.00: HPA detected: current 781420655, native 781422768
ata1.00: ATA-7: SAMSUNG HD400LJ, ZZ100-15, max UDMA7
ata1.00: 781420655 sectors, multi 16: LBA48 NCQ (depth 31/32)
ata1.00: configured for UDMA/133
scsi 0:0:0:0: Direct-Access     ATA      SAMSUNG HD400LJ  ZZ10 PQ: 0 ANSI: 5
sd 0:0:0:0: [sda] 781420655 512-byte logical blocks: (400 GB/372 GiB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
 sda: sda1 sda2 < sda5 sda6 sda7 sda8 sda9 sda10 sda11 sda12 >
sd 0:0:0:0: [sda] Attached SCSI disk
ata2: SATA link down (SStatus 0 SControl 300)
usb 2-1: new low-speed USB device number 2 using ohci_hcd
input: Microsoft Microsoft IntelliMouse\xffffffc2\xffffffae Optical as /devices/pci0000:00/0000:00:0b.0/usb2/2-1/2-1:1.0/input/input0
generic-usb 0003:045E:0029.0001: input: USB HID v1.00 Mouse [Microsoft Microsoft IntelliMouse\xffffffc2\xffffffae Optical] on usb-0000:00:0b.0-1/input0
ata4: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata4.00: ATAPI: TSSTcorpCD/DVDW SH-W163A, TS01, max UDMA/33
ata4.00: applying bridge limits
usb 2-4: new full-speed USB device number 3 using ohci_hcd
ata4.00: configured for UDMA/33
scsi 3:0:0:0: CD-ROM            TSSTcorp CD/DVDW SH-W163A TS01 PQ: 0 ANSI: 5
scsi 4:0:0:0: Direct-Access     ATA      ST3160212ACE     3.AC PQ: 0 ANSI: 5
sd 4:0:0:0: [sdb] 312579695 512-byte logical blocks: (160 GB/149 GiB)
sd 4:0:0:0: [sdb] Write Protect is off
sd 4:0:0:0: [sdb] Mode Sense: 00 3a 00 00
sd 4:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
 sdb: sdb1 sdb2
sd 4:0:0:0: [sdb] Attached SCSI disk
hub 2-4:1.0: USB hub found
hub 2-4:1.0: 5 ports detected
hub 2-4:1.0: insufficient power available to use all downstream ports
ata6.00: ATAPI: HL-DT-ST DVDRAM GSA-4082B, A201, max UDMA/33
ata6: nv_mode_filter: 0x739f&0x739f->0x739f, BIOS=0x7000 (0xc600c000) ACPI=0x701f (60:600:0x13)
ata6.00: configured for UDMA/33
scsi 5:0:0:0: CD-ROM            HL-DT-ST DVDRAM GSA-4082B A201 PQ: 0 ANSI: 5
kjournald starting.  Commit interval 5 seconds
EXT3-fs (sda5): mounted filesystem with writeback data mode
VFS: Mounted root (ext3 filesystem) readonly on device 8:5.
devtmpfs: mounted
Freeing unused kernel memory: 432k freed
usb 2-4.5: new full-speed USB device number 4 using ohci_hcd
input: Cherry USB-Keyboard as /devices/pci0000:00/0000:00:0b.0/usb2/2-4/2-4.5/2-4.5:1.0/input/input1
generic-usb 0003:046A:0001.0002: input: USB HID v1.10 Keyboard [Cherry USB-Keyboard] on usb-0000:00:0b.0-4.5/input0
udevd[388]: starting version 182
k8temp 0000:00:18.3: Temperature readouts might be wrong - check erratum #141
input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input2
ACPI: Power Button [PWRB]
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
ACPI: Power Button [PWRF]
IT8716 SuperIO detected.
forcedeth: Reverse Engineered nForce ethernet driver. Version 0.64.
parport_pc 00:08: reported by Plug and Play ACPI
parport0: PC-style at 0x378 (0x778), irq 7
ACPI: PCI Interrupt Link [APCH] enabled at IRQ 23
forcedeth 0000:00:14.0: setting latency timer to 64
, dma 3 [PCSPP,TRISTATE,COMPAT,ECP,DMA]
ACPI: PCI Interrupt Link [APC3] enabled at IRQ 18
firewire_ohci: Added fw-ohci device 0000:01:0e.0, OHCI v1.10, 4 IR + 8 IT contexts, quirks 0x2
Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
00:07: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
sr0: scsi3-mmc drive: 48x/48x writer cd/rw xa/form2 cdda tray
cdrom: Uniform CD-ROM driver Revision: 3.20
sr 3:0:0:0: Attached scsi CD-ROM sr0
sr1: scsi3-mmc drive: 32x/32x writer dvd-ram cd/rw xa/form2 cdda tray
sr 5:0:0:0: Attached scsi CD-ROM sr1
forcedeth 0000:00:14.0: ifname eth0, PHY OUI 0x5043 @ 1, addr 00:0f:ea:4f:a6:33
forcedeth 0000:00:14.0: highdma pwrctl gbit lnktim desc-v3
i2c i2c-0: nForce2 SMBus adapter at 0x1c00
i2c i2c-1: nForce2 SMBus adapter at 0x1c80
ACPI: PCI Interrupt Link [AAZA] enabled at IRQ 22
hda_intel: Disabling MSI
snd_hda_intel 0000:00:10.1: setting latency timer to 64
ACPI: PCI Interrupt Link [APC2] enabled at IRQ 17
firewire_core: created device fw0: GUID 000fea00005059e7, S400
hda_codec: ALC883: BIOS auto-probing.
ACPI: PCI Interrupt Link [APC6] enabled at IRQ 16
snd_hda_intel 0000:02:00.1: irq 41 for MSI/MSI-X
HDMI status: Codec=0 Pin=3 Presence_Detect=0 ELD_Valid=0
EXT3-fs (sda5): using internal journal
Adding 4193276k swap on /dev/sda10.  Priority:-1 extents:1 across:4193276k 
kjournald starting.  Commit interval 5 seconds
EXT3-fs (sda6): using internal journal
EXT3-fs (sda6): mounted filesystem with writeback data mode
kjournald starting.  Commit interval 5 seconds
EXT3-fs (sda11): using internal journal
EXT3-fs (sda11): mounted filesystem with writeback data mode
kjournald starting.  Commit interval 5 seconds
EXT3-fs (sda8): using internal journal
EXT3-fs (sda8): mounted filesystem with writeback data mode
fuse init (API version 7.18)
