From: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
To: Tomi Valkeinen <tomi.valkeinen@ti.com>
Cc: dri-devel@lists.freedesktop.org
Subject: Re: [PATCHv2 01/31] drm/omap: HDMI: change enable/disable to avoid sync-losts
Date: Mon, 29 Feb 2016 23:48:38 +0200 [thread overview]
Message-ID: <3182927.3fyBP17F5l@avalon> (raw)
In-Reply-To: <1456479379-6086-2-git-send-email-tomi.valkeinen@ti.com>
Hi Tomi,
Thank you for the patch.
On Friday 26 February 2016 11:35:49 Tomi Valkeinen wrote:
> We occasionally see DISPC sync-lost errors when enabling and disabling
> HDMI. Sometimes we get only a few, which get handled (ignored) by the
> driver, but sometimes there's a flood of the errors which doesn't seem
> to stop.
>
> The HW team has root caused this to the order in which HDMI and DISPC
> are enabled/disabled. Currently we enable HDMI first, and then DISPC,
> and vice versa when disabling. HW team's suggestion is to do it the
> other way around.
>
> This patch changes the order, but this has two side effects as the pixel
> clock is produced by HDMI, and the clock is not running when we
> enable/disable DISPC:
>
> * When enabling DISPC first, we don't get vertical sync events
> * When disabling DISPC last, we don't get FRAMEDONE event
>
> At the moment we use both of those to verify that DISPC has been
> enabled/disabled properly. Thus this patch also needs to change the
> omapdrm and omapdss which handle the DISPC side.
>
> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
> ---
> drivers/gpu/drm/omapdrm/dss/hdmi4.c | 16 ++++++++--------
> drivers/gpu/drm/omapdrm/dss/hdmi5.c | 16 ++++++++--------
> drivers/gpu/drm/omapdrm/omap_crtc.c | 5 +++++
> 3 files changed, 21 insertions(+), 16 deletions(-)
>
> diff --git a/drivers/gpu/drm/omapdrm/dss/hdmi4.c
> b/drivers/gpu/drm/omapdrm/dss/hdmi4.c index 7103c659a534..b09ce9ee82fa
> 100644
> --- a/drivers/gpu/drm/omapdrm/dss/hdmi4.c
> +++ b/drivers/gpu/drm/omapdrm/dss/hdmi4.c
> @@ -214,22 +214,22 @@ static int hdmi_power_on_full(struct omap_dss_device
> *dssdev) /* tv size */
> dss_mgr_set_timings(mgr, p);
>
> - r = hdmi_wp_video_start(&hdmi.wp);
> - if (r)
> - goto err_vid_enable;
> -
> r = dss_mgr_enable(mgr);
> if (r)
> goto err_mgr_enable;
>
> + r = hdmi_wp_video_start(&hdmi.wp);
> + if (r)
> + goto err_vid_enable;
> +
> hdmi_wp_set_irqenable(wp,
> HDMI_IRQ_LINK_CONNECT | HDMI_IRQ_LINK_DISCONNECT);
>
> return 0;
>
> -err_mgr_enable:
> - hdmi_wp_video_stop(&hdmi.wp);
> err_vid_enable:
> + dss_mgr_disable(mgr);
> +err_mgr_enable:
> hdmi_wp_set_phy_pwr(&hdmi.wp, HDMI_PHYPWRCMD_OFF);
> err_phy_pwr:
> err_phy_cfg:
> @@ -246,10 +246,10 @@ static void hdmi_power_off_full(struct omap_dss_device
> *dssdev)
>
> hdmi_wp_clear_irqenable(&hdmi.wp, 0xffffffff);
>
> - dss_mgr_disable(mgr);
> -
> hdmi_wp_video_stop(&hdmi.wp);
>
> + dss_mgr_disable(mgr);
> +
> hdmi_wp_set_phy_pwr(&hdmi.wp, HDMI_PHYPWRCMD_OFF);
>
> dss_pll_disable(&hdmi.pll.pll);
> diff --git a/drivers/gpu/drm/omapdrm/dss/hdmi5.c
> b/drivers/gpu/drm/omapdrm/dss/hdmi5.c index a955a2c4c061..4485a1c37bd8
> 100644
> --- a/drivers/gpu/drm/omapdrm/dss/hdmi5.c
> +++ b/drivers/gpu/drm/omapdrm/dss/hdmi5.c
> @@ -231,22 +231,22 @@ static int hdmi_power_on_full(struct omap_dss_device
> *dssdev) /* tv size */
> dss_mgr_set_timings(mgr, p);
>
> - r = hdmi_wp_video_start(&hdmi.wp);
> - if (r)
> - goto err_vid_enable;
> -
> r = dss_mgr_enable(mgr);
> if (r)
> goto err_mgr_enable;
>
> + r = hdmi_wp_video_start(&hdmi.wp);
> + if (r)
> + goto err_vid_enable;
> +
> hdmi_wp_set_irqenable(&hdmi.wp,
> HDMI_IRQ_LINK_CONNECT | HDMI_IRQ_LINK_DISCONNECT);
>
> return 0;
>
> -err_mgr_enable:
> - hdmi_wp_video_stop(&hdmi.wp);
> err_vid_enable:
> + dss_mgr_disable(mgr);
> +err_mgr_enable:
> hdmi_wp_set_phy_pwr(&hdmi.wp, HDMI_PHYPWRCMD_OFF);
> err_phy_pwr:
> err_phy_cfg:
> @@ -263,10 +263,10 @@ static void hdmi_power_off_full(struct omap_dss_device
> *dssdev)
>
> hdmi_wp_clear_irqenable(&hdmi.wp, 0xffffffff);
>
> - dss_mgr_disable(mgr);
> -
> hdmi_wp_video_stop(&hdmi.wp);
>
> + dss_mgr_disable(mgr);
> +
> hdmi_wp_set_phy_pwr(&hdmi.wp, HDMI_PHYPWRCMD_OFF);
>
> dss_pll_disable(&hdmi.pll.pll);
> diff --git a/drivers/gpu/drm/omapdrm/omap_crtc.c
> b/drivers/gpu/drm/omapdrm/omap_crtc.c index 2ed0754ed19e..7dd3d44a93e5
> 100644
> --- a/drivers/gpu/drm/omapdrm/omap_crtc.c
> +++ b/drivers/gpu/drm/omapdrm/omap_crtc.c
> @@ -138,6 +138,11 @@ static void omap_crtc_set_enabled(struct drm_crtc
> *crtc, bool enable) u32 framedone_irq, vsync_irq;
> int ret;
>
> + if (omap_crtc->mgr->output->output_type == OMAP_DISPLAY_TYPE_HDMI) {
> + dispc_mgr_enable(channel, enable);
> + return;
> + }
> +
> if (dispc_mgr_is_enabled(channel) == enable)
> return;
--
Regards,
Laurent Pinchart
_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel
next prev parent reply other threads:[~2016-02-29 21:48 UTC|newest]
Thread overview: 40+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-02-26 9:35 [PATCHv2 00/31] drm/omap: patches for v4.6 part 1 Tomi Valkeinen
2016-02-26 9:35 ` [PATCHv2 01/31] drm/omap: HDMI: change enable/disable to avoid sync-losts Tomi Valkeinen
2016-02-29 21:48 ` Laurent Pinchart [this message]
2016-02-26 9:35 ` [PATCHv2 02/31] HACK: drm/omap: always use blocking DMM fill Tomi Valkeinen
2016-02-29 21:47 ` Laurent Pinchart
2016-02-26 9:35 ` [PATCHv2 03/31] drm/omap: add dmm_read() and dmm_write() wrappers Tomi Valkeinen
2016-02-26 9:35 ` [PATCHv2 04/31] drm/omap: drm_atomic_get_plane_state() may return ERR_PTR Tomi Valkeinen
2016-02-26 9:35 ` [PATCHv2 05/31] drm/omap: tpd12s015: remove platform data support Tomi Valkeinen
2016-02-26 9:35 ` [PATCHv2 06/31] drm/omap: tpd12s015: gpio descriptor API Tomi Valkeinen
2016-02-26 9:35 ` [PATCHv2 07/31] drm/omap: tpd12s015: CT_CP_HPD as optional gpio Tomi Valkeinen
2016-02-26 9:35 ` [PATCHv2 08/31] drm/omap: add define for DISPC_IRQ_WBUNCOMPLETEERROR Tomi Valkeinen
2016-02-26 9:35 ` [PATCHv2 09/31] drm/omap: use dma_mapping_error in omap_gem_attach_pages Tomi Valkeinen
2016-02-29 21:48 ` Laurent Pinchart
2016-02-26 9:35 ` [PATCHv2 10/31] drm/omap: use dma_mapping_error in omap_gem_dma_sync Tomi Valkeinen
2016-02-29 21:51 ` Laurent Pinchart
2016-02-26 9:35 ` [PATCHv2 11/31] drm/omap: print an error if display enable fails Tomi Valkeinen
2016-02-29 21:52 ` Laurent Pinchart
2016-02-26 9:36 ` [PATCHv2 12/31] drm/omap: gem: Clean up GEM objects memory flags Tomi Valkeinen
2016-02-26 9:36 ` [PATCHv2 13/31] drm/omap: gem: Refactor GEM object allocation Tomi Valkeinen
2016-02-26 9:36 ` [PATCHv2 14/31] drm/omap: gem: Implement dma_buf import Tomi Valkeinen
2016-02-26 9:36 ` [PATCHv2 15/31] drm/omap: remove support for ext mem & sync Tomi Valkeinen
2016-02-26 9:36 ` [PATCHv2 16/31] drm/omap: increase vblank wait timeout Tomi Valkeinen
2016-02-26 9:36 ` [PATCHv2 17/31] drm/omap: DISPC: support double-pixel mode Tomi Valkeinen
2016-02-26 9:36 ` [PATCHv2 18/31] drm/omap: support double-pixel Tomi Valkeinen
2016-02-26 9:36 ` [PATCHv2 19/31] drm/omap: HDMI: support double-pixel pixel clock Tomi Valkeinen
2016-02-26 9:36 ` [PATCHv2 20/31] drm/omap: HDMI: Fix HSW value Tomi Valkeinen
2016-02-29 21:55 ` Laurent Pinchart
2016-03-01 8:32 ` Tomi Valkeinen
2016-02-26 9:36 ` [PATCHv2 21/31] drm/omap: HDMI: fix WP timings for ilace Tomi Valkeinen
2016-02-26 9:36 ` [PATCHv2 22/31] drm/omap: DISPC: Fix field order for HDMI Tomi Valkeinen
2016-02-26 9:36 ` [PATCHv2 23/31] drm/omap: HDMI5: Fix FC HSW value Tomi Valkeinen
2016-02-26 9:36 ` [PATCHv2 24/31] drm/omap: HDMI5: clean up timings copy Tomi Valkeinen
2016-02-26 9:36 ` [PATCHv2 25/31] drm/omap: HDMI5: Add interlace support Tomi Valkeinen
2016-02-26 9:36 ` [PATCHv2 26/31] drm/omap: HDMI5: allow interlace Tomi Valkeinen
2016-02-26 9:36 ` [PATCHv2 27/31] drm/omap: verify that display x-res is divisible by 8 Tomi Valkeinen
2016-02-26 9:36 ` [PATCHv2 28/31] drm/omap: verify that fb plane pitches are the same Tomi Valkeinen
2016-02-26 9:36 ` [PATCHv2 29/31] drm/omap: EBUSY status handling in omap_gem_fault() Tomi Valkeinen
2016-02-26 9:36 ` [PATCHv2 30/31] drm/omap: fix crtc->plane property delegation Tomi Valkeinen
2016-02-26 9:36 ` [PATCHv2 31/31] drm/omap: check if rotation is supported before commit Tomi Valkeinen
2016-02-29 21:56 ` [PATCHv2 00/31] drm/omap: patches for v4.6 part 1 Laurent Pinchart
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=3182927.3fyBP17F5l@avalon \
--to=laurent.pinchart@ideasonboard.com \
--cc=dri-devel@lists.freedesktop.org \
--cc=tomi.valkeinen@ti.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox