Re: [PATCH v12 7/7] phy: freescale: Add HDMI PHY driver for i.MX8MQ

[Alexander Stein <alexander.stein@ew.tq-group.com>]

Hi Sandor,

thanks for the update.

Am Mittwoch, 10. Januar 2024, 02:08:48 CET schrieb Sandor Yu:
> Add Cadence HDP-TX HDMI PHY driver for i.MX8MQ.
> 
> Cadence HDP-TX PHY could be put in either DP mode or
> HDMI mode base on the configuration chosen.
> HDMI PHY mode is configurated in the driver.
> 
> Signed-off-by: Sandor Yu <Sandor.yu@nxp.com>
> Tested-by: Alexander Stein <alexander.stein@ew.tq-group.com>
> ---
> v11->v12:
> - Adjust clk disable order.
> - Return error code to replace -1 for function wait_for_ack().
> - Use bool for variable pclk_in.
> - Add year 2024 to copyright.
> 
>  drivers/phy/freescale/Kconfig               |  10 +
>  drivers/phy/freescale/Makefile              |   1 +
>  drivers/phy/freescale/phy-fsl-imx8mq-hdmi.c | 959 ++++++++++++++++++++
>  3 files changed, 970 insertions(+)
>  create mode 100644 drivers/phy/freescale/phy-fsl-imx8mq-hdmi.c
> 
> diff --git a/drivers/phy/freescale/Kconfig b/drivers/phy/freescale/Kconfig
> index c39709fd700ac..14f47b7cc77ab 100644
> --- a/drivers/phy/freescale/Kconfig
> +++ b/drivers/phy/freescale/Kconfig
> @@ -45,6 +45,16 @@ config PHY_FSL_IMX8MQ_DP
>  	  Enable this to support the Cadence HDPTX DP PHY driver
>  	  on i.MX8MQ SOC.
> 
> +config PHY_FSL_IMX8MQ_HDMI
> +	tristate "Freescale i.MX8MQ HDMI PHY support"
> +	depends on OF && HAS_IOMEM
> +	depends on COMMON_CLK
> +	select GENERIC_PHY
> +	select CDNS_MHDP_HELPER
> +	help
> +	  Enable this to support the Cadence HDPTX HDMI PHY driver
> +	  on i.MX8MQ SOC.
> +
>  endif
> 
>  config PHY_FSL_LYNX_28G
> diff --git a/drivers/phy/freescale/Makefile b/drivers/phy/freescale/Makefile
> index 47e5285209fa8..1380ac31c2ead 100644
> --- a/drivers/phy/freescale/Makefile
> +++ b/drivers/phy/freescale/Makefile
> @@ -1,5 +1,6 @@
>  # SPDX-License-Identifier: GPL-2.0-only
>  obj-$(CONFIG_PHY_FSL_IMX8MQ_DP)		+= phy-fsl-imx8mq-dp.o
> +obj-$(CONFIG_PHY_FSL_IMX8MQ_HDMI)	+= phy-fsl-imx8mq-hdmi.o
>  obj-$(CONFIG_PHY_FSL_IMX8MQ_USB)	+= phy-fsl-imx8mq-usb.o
>  obj-$(CONFIG_PHY_MIXEL_LVDS_PHY)	+= phy-fsl-imx8qm-lvds-phy.o
>  obj-$(CONFIG_PHY_MIXEL_MIPI_DPHY)	+= phy-fsl-imx8-mipi-dphy.o
> diff --git a/drivers/phy/freescale/phy-fsl-imx8mq-hdmi.c
> b/drivers/phy/freescale/phy-fsl-imx8mq-hdmi.c new file mode 100644
> index 0000000000000..9e03c726f290c
> --- /dev/null
> +++ b/drivers/phy/freescale/phy-fsl-imx8mq-hdmi.c
> @@ -0,0 +1,959 @@
> [snip]
> +int cdns_hdptx_hdmi_phy_valid(struct phy *phy, enum phy_mode mode, int
> submode, +			      union phy_configure_opts *opts)

This function can be made static.

Thanks and best regards,
Alexander

> +{
> +	u32 rate = opts->hdmi.pixel_clk_rate;
> +	int i;
> +
> +	for (i = 0; i < ARRAY_SIZE(pixel_clk_output_ctrl_table); i++)
> +		if (rate == 
pixel_clk_output_ctrl_table[i].pixel_clk_freq_min)
> +			return 0;
> +
> +	return -EINVAL;
> +}
> +
> +static int cdns_hdptx_hdmi_phy_init(struct phy *phy)
> +{
> +	return 0;
> +}
> +
> +static int cdns_hdptx_hdmi_configure(struct phy *phy,
> +				     union phy_configure_opts *opts)
> +{
> +	struct cdns_hdptx_hdmi_phy *cdns_phy = phy_get_drvdata(phy);
> +	int ret;
> +
> +	cdns_phy->pixel_clk_rate = opts->hdmi.pixel_clk_rate;
> +	cdns_phy->color_space = opts->hdmi.color_space;
> +	cdns_phy->bpc = opts->hdmi.bpc;
> +
> +	/* Check HDMI FW alive before HDMI PHY init */
> +	ret = hdptx_phy_check_alive(cdns_phy);
> +	if (!ret) {
> +		dev_err(cdns_phy->dev, "NO HDMI FW running\n");
> +		return -ENXIO;
> +	}
> +
> +	/* Configure PHY */
> +	if (hdptx_hdmi_phy_cfg(cdns_phy, cdns_phy->pixel_clk_rate) < 0) {
> +		dev_err(cdns_phy->dev, "failed to set phy pclock\n");
> +		return -EINVAL;
> +	}
> +
> +	ret = hdptx_hdmi_phy_power_up(cdns_phy);
> +	if (ret < 0)
> +		return ret;
> +
> +	hdptx_hdmi_phy_set_vswing(cdns_phy);
> +
> +	return 0;
> +}
> +
> +static const struct phy_ops cdns_hdptx_hdmi_phy_ops = {
> +	.init = cdns_hdptx_hdmi_phy_init,
> +	.configure = cdns_hdptx_hdmi_configure,
> +	.power_on = cdns_hdptx_hdmi_phy_on,
> +	.power_off = cdns_hdptx_hdmi_phy_off,
> +	.validate = cdns_hdptx_hdmi_phy_valid,
> +	.owner = THIS_MODULE,
> +};
> +
> +static int cdns_hdptx_hdmi_phy_probe(struct platform_device *pdev)
> +{
> +	struct cdns_hdptx_hdmi_phy *cdns_phy;
> +	struct device *dev = &pdev->dev;
> +	struct device_node *node = dev->of_node;
> +	struct phy_provider *phy_provider;
> +	struct resource *res;
> +	struct phy *phy;
> +	int ret;
> +
> +	cdns_phy = devm_kzalloc(dev, sizeof(*cdns_phy), GFP_KERNEL);
> +	if (!cdns_phy)
> +		return -ENOMEM;
> +
> +	dev_set_drvdata(dev, cdns_phy);
> +	cdns_phy->dev = dev;
> +	mutex_init(&cdns_phy->mbox_mutex);
> +
> +	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
> +	if (!res)
> +		return -ENODEV;
> +	cdns_phy->regs = devm_ioremap(dev, res->start, resource_size(res));
> +	if (IS_ERR(cdns_phy->regs))
> +		return PTR_ERR(cdns_phy->regs);
> +
> +	phy = devm_phy_create(dev, node, &cdns_hdptx_hdmi_phy_ops);
> +	if (IS_ERR(phy))
> +		return PTR_ERR(phy);
> +
> +	phy->attrs.mode = PHY_MODE_HDMI;
> +
> +	cdns_phy->phy = phy;
> +	phy_set_drvdata(phy, cdns_phy);
> +
> +	/* init base struct for access mhdp mailbox */
> +	cdns_phy->base.dev = cdns_phy->dev;
> +	cdns_phy->base.regs = cdns_phy->regs;
> +	cdns_phy->base.mbox_mutex = &cdns_phy->mbox_mutex;
> +
> +	ret = hdptx_hdmi_clk_enable(cdns_phy);
> +	if (ret) {
> +		dev_err(dev, "Init clk fail\n");
> +		return -EINVAL;
> +	}
> +
> +	phy_provider = devm_of_phy_provider_register(dev, 
of_phy_simple_xlate);
> +	if (IS_ERR(phy_provider)) {
> +		ret = PTR_ERR(phy_provider);
> +		goto clk_disable;
> +	}
> +
> +	dev_dbg(dev, "probe success!\n");
> +
> +	return 0;
> +
> +clk_disable:
> +	hdptx_hdmi_clk_disable(cdns_phy);
> +
> +	return -EINVAL;
> +}
> +
> +static int cdns_hdptx_hdmi_phy_remove(struct platform_device *pdev)
> +{
> +	struct cdns_hdptx_hdmi_phy *cdns_phy = platform_get_drvdata(pdev);
> +
> +	hdptx_hdmi_clk_disable(cdns_phy);
> +
> +	return 0;
> +}
> +
> +static const struct of_device_id cdns_hdptx_hdmi_phy_of_match[] = {
> +	{.compatible = "fsl,imx8mq-hdmi-phy" },
> +	{ /* sentinel */ }
> +};
> +MODULE_DEVICE_TABLE(of, cdns_hdptx_hdmi_phy_of_match);
> +
> +static struct platform_driver cdns_hdptx_hdmi_phy_driver = {
> +	.probe = cdns_hdptx_hdmi_phy_probe,
> +	.remove = cdns_hdptx_hdmi_phy_remove,
> +	.driver = {
> +		.name	= "cdns-hdptx-hdmi-phy",
> +		.of_match_table	= cdns_hdptx_hdmi_phy_of_match,
> +	}
> +};
> +module_platform_driver(cdns_hdptx_hdmi_phy_driver);
> +
> +MODULE_AUTHOR("Sandor Yu <sandor.yu@nxp.com>");
> +MODULE_DESCRIPTION("Cadence HDP-TX HDMI PHY driver");
> +MODULE_LICENSE("GPL");


-- 
TQ-Systems GmbH | Mühlstraße 2, Gut Delling | 82229 Seefeld, Germany
Amtsgericht München, HRB 105018
Geschäftsführer: Detlef Schneider, Rüdiger Stahl, Stefan Schneider
http://www.tq-group.com/