dri-devel Archive on lore.kernel.org
 help / color / mirror / Atom feed
From: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
To: Peter Ujfalusi <peter.ujfalusi@ti.com>
Cc: tomi.valkeinen@ti.com, dri-devel@lists.freedesktop.org
Subject: Re: [RFC 3/7] drm/omap: Manage the usable omap_dss_device list within omap_drm_private
Date: Fri, 01 Sep 2017 14:27:08 +0300	[thread overview]
Message-ID: <3510335.Tu8AiCYPt6@avalon> (raw)
In-Reply-To: <20170829073218.11097-4-peter.ujfalusi@ti.com>

Hi Peter,

Thank you for the patch.

On Tuesday, 29 August 2017 10:32:14 EEST Peter Ujfalusi wrote:
> Instead of reaching back to DSS to iterate through the dss_devices every
> time, use an internal array where we store the available and usable
> dss_devices.
> 
> Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
> ---
>  drivers/gpu/drm/omapdrm/omap_drv.c | 95 +++++++++++++++++++++--------------
>  drivers/gpu/drm/omapdrm/omap_drv.h |  3 ++
>  2 files changed, 62 insertions(+), 36 deletions(-)
> 
> diff --git a/drivers/gpu/drm/omapdrm/omap_drv.c
> b/drivers/gpu/drm/omapdrm/omap_drv.c index bd7fe317a365..b089604e871c
> 100644
> --- a/drivers/gpu/drm/omapdrm/omap_drv.c
> +++ b/drivers/gpu/drm/omapdrm/omap_drv.c
> @@ -146,18 +146,27 @@ static int get_connector_type(struct omap_dss_device
> *dssdev) }
>  }
> 
> -static void omap_disconnect_dssdevs(void)
> +static void omap_disconnect_dssdevs(struct drm_device *ddev)
>  {
> -	struct omap_dss_device *dssdev = NULL;
> +	struct omap_drm_private *priv = ddev->dev_private;
> +	int i;
> +
> +	for (i = 0; i < priv->num_dssdevs; i++) {

is is never negative, you can make it an unsigned int. This comment applies 
through the whole patch.

> +		struct omap_dss_device *dssdev = priv->dssdevs[i];
> 
> -	for_each_dss_dev(dssdev)
>  		dssdev->driver->disconnect(dssdev);
> +		priv->dssdevs[i] = NULL;
> +		omap_dss_put_device(dssdev);
> +	}
> +
> +	priv->num_dssdevs = 0;
>  }
> 
> -static int omap_connect_dssdevs(void)
> +static int omap_connect_dssdevs(struct drm_device *ddev)
>  {
> -	int r;
> +	struct omap_drm_private *priv = ddev->dev_private;
>  	struct omap_dss_device *dssdev = NULL;
> +	int r;
> 
>  	if (!omapdss_stack_is_ready())
>  		return -EPROBE_DEFER;
> @@ -170,6 +179,14 @@ static int omap_connect_dssdevs(void)
>  		} else if (r) {
>  			dev_warn(dssdev->dev, "could not connect display: %s\n",
>  				dssdev->name);
> +		} else {
> +			omap_dss_get_device(dssdev);
> +			priv->dssdevs[priv->num_dssdevs++] = dssdev;
> +			if (priv->num_dssdevs == ARRAY_SIZE(priv->dssdevs)) {
> +				/* To balance the 'for_each_dss_dev' loop */
> +				omap_dss_put_device(dssdev);
> +				break;
> +			}
>  		}
>  	}
> 
> @@ -180,7 +197,7 @@ static int omap_connect_dssdevs(void)
>  	 * if we are deferring probe, we disconnect the devices we previously
>  	 * connected
>  	 */
> -	omap_disconnect_dssdevs();
> +	omap_disconnect_dssdevs(ddev);
> 
>  	return r;
>  }
> @@ -205,7 +222,7 @@ static int omap_modeset_init(struct drm_device *dev)
>  	int num_ovls = priv->dispc_ops->get_num_ovls();
>  	int num_mgrs = priv->dispc_ops->get_num_mgrs();
>  	int num_crtcs, crtc_idx, plane_idx;
> -	int ret;
> +	int ret, i;
>  	u32 plane_crtc_mask;
> 
>  	drm_mode_config_init(dev);
> @@ -222,11 +239,7 @@ static int omap_modeset_init(struct drm_device *dev)
>  	 * configuration does not match the expectations or exceeds
>  	 * the available resources, the configuration is rejected.
>  	 */
> -	num_crtcs = 0;
> -	for_each_dss_dev(dssdev)
> -		if (omapdss_device_is_connected(dssdev))
> -			num_crtcs++;
> -
> +	num_crtcs = priv->num_dssdevs;
>  	if (num_crtcs > num_mgrs || num_crtcs > num_ovls ||
>  	    num_crtcs > ARRAY_SIZE(priv->crtcs) ||
>  	    num_crtcs > ARRAY_SIZE(priv->planes) ||
> @@ -244,15 +257,13 @@ static int omap_modeset_init(struct drm_device *dev)
> 
>  	crtc_idx = 0;
>  	plane_idx = 0;
> -	for_each_dss_dev(dssdev) {
> +	for (i = 0; i < priv->num_dssdevs; i++) {
> +		struct omap_dss_device *dssdev = priv->dssdevs[i];
>  		struct drm_connector *connector;
>  		struct drm_encoder *encoder;
>  		struct drm_plane *plane;
>  		struct drm_crtc *crtc;
> 
> -		if (!omapdss_device_is_connected(dssdev))
> -			continue;
> -

I believe this hunk is correct as dss devices are only disconnected by calls 
to the oma_dss_driver .disconnect() operation, which is only called from 
omap_disconnect_dssdevs(), but you should at the very least explain why in the 
commit message.

>  		encoder = omap_encoder_init(dev, dssdev);
>  		if (!encoder)
>  			return -ENOMEM;
> @@ -326,11 +337,14 @@ static int omap_modeset_init(struct drm_device *dev)
>  /*
>   * Enable the HPD in external components if supported
>   */
> -static void omap_modeset_enable_external_hpd(void)
> +static void omap_modeset_enable_external_hpd(struct drm_device *ddev)
>  {
> -	struct omap_dss_device *dssdev = NULL;
> +	struct omap_drm_private *priv = ddev->dev_private;
> +	int i;
> +
> +	for (i = 0; i < priv->num_dssdevs; i++) {
> +		struct omap_dss_device *dssdev = priv->dssdevs[i];
> 
> -	for_each_dss_dev(dssdev) {
>  		if (dssdev->driver->enable_hpd)
>  			dssdev->driver->enable_hpd(dssdev);
>  	}
> @@ -339,11 +353,14 @@ static void omap_modeset_enable_external_hpd(void)
>  /*
>   * Disable the HPD in external components if supported
>   */
> -static void omap_modeset_disable_external_hpd(void)
> +static void omap_modeset_disable_external_hpd(struct drm_device *ddev)
>  {
> -	struct omap_dss_device *dssdev = NULL;
> +	struct omap_drm_private *priv = ddev->dev_private;
> +	int i;
> +
> +	for (i = 0; i < priv->num_dssdevs; i++) {
> +		struct omap_dss_device *dssdev = priv->dssdevs[i];
> 
> -	for_each_dss_dev(dssdev) {
>  		if (dssdev->driver->disable_hpd)
>  			dssdev->driver->disable_hpd(dssdev);
>  	}
> @@ -562,7 +579,7 @@ static int pdev_probe(struct platform_device *pdev)
> 
>  	omap_crtc_pre_init();
> 
> -	ret = omap_connect_dssdevs();
> +	ret = omap_connect_dssdevs(ddev);
>  	if (ret)
>  		goto err_crtc_uninit;
> 
> @@ -597,7 +614,7 @@ static int pdev_probe(struct platform_device *pdev)
>  	priv->fbdev = omap_fbdev_init(ddev);
> 
>  	drm_kms_helper_poll_init(ddev);
> -	omap_modeset_enable_external_hpd();
> +	omap_modeset_enable_external_hpd(ddev);
> 
>  	/*
>  	 * Register the DRM device with the core and the connectors with
> @@ -610,7 +627,7 @@ static int pdev_probe(struct platform_device *pdev)
>  	return 0;
> 
>  err_cleanup_helpers:
> -	omap_modeset_disable_external_hpd();
> +	omap_modeset_disable_external_hpd(ddev);
>  	drm_kms_helper_poll_fini(ddev);
>  	if (priv->fbdev)
>  		omap_fbdev_free(ddev);
> @@ -620,7 +637,7 @@ static int pdev_probe(struct platform_device *pdev)
>  err_gem_deinit:
>  	omap_gem_deinit(ddev);
>  	destroy_workqueue(priv->wq);
> -	omap_disconnect_dssdevs();
> +	omap_disconnect_dssdevs(ddev);
>  err_crtc_uninit:
>  	omap_crtc_pre_uninit();
>  	drm_dev_unref(ddev);
> @@ -636,7 +653,7 @@ static int pdev_remove(struct platform_device *pdev)
> 
>  	drm_dev_unregister(ddev);
> 
> -	omap_modeset_disable_external_hpd();
> +	omap_modeset_disable_external_hpd(ddev);
>  	drm_kms_helper_poll_fini(ddev);
> 
>  	if (priv->fbdev)
> @@ -651,7 +668,7 @@ static int pdev_remove(struct platform_device *pdev)
> 
>  	destroy_workqueue(priv->wq);
> 
> -	omap_disconnect_dssdevs();
> +	omap_disconnect_dssdevs(ddev);
>  	omap_crtc_pre_uninit();
> 
>  	drm_dev_unref(ddev);
> @@ -660,11 +677,14 @@ static int pdev_remove(struct platform_device *pdev)
>  }
> 
>  #ifdef CONFIG_PM_SLEEP
> -static int omap_drm_suspend_all_displays(void)
> +static int omap_drm_suspend_all_displays(struct drm_device *ddev)
>  {
> -	struct omap_dss_device *dssdev = NULL;
> +	struct omap_drm_private *priv = ddev->dev_private;
> +	int i;
> +
> +	for (i = 0; i < priv->num_dssdevs; i++) {
> +		struct omap_dss_device *dssdev = priv->dssdevs[i];
> 
> -	for_each_dss_dev(dssdev) {
>  		if (!dssdev->driver)
>  			continue;
> 
> @@ -679,11 +699,14 @@ static int omap_drm_suspend_all_displays(void)
>  	return 0;
>  }
> 
> -static int omap_drm_resume_all_displays(void)
> +static int omap_drm_resume_all_displays(struct drm_device *ddev)
>  {
> -	struct omap_dss_device *dssdev = NULL;
> +	struct omap_drm_private *priv = ddev->dev_private;
> +	int i;
> +
> +	for (i = 0; i < priv->num_dssdevs; i++) {
> +		struct omap_dss_device *dssdev = priv->dssdevs[i];
> 
> -	for_each_dss_dev(dssdev) {
>  		if (!dssdev->driver)
>  			continue;
> 
> @@ -703,7 +726,7 @@ static int omap_drm_suspend(struct device *dev)
>  	drm_kms_helper_poll_disable(drm_dev);
> 
>  	drm_modeset_lock_all(drm_dev);
> -	omap_drm_suspend_all_displays();
> +	omap_drm_suspend_all_displays(drm_dev);
>  	drm_modeset_unlock_all(drm_dev);
> 
>  	return 0;
> @@ -714,7 +737,7 @@ static int omap_drm_resume(struct device *dev)
>  	struct drm_device *drm_dev = dev_get_drvdata(dev);
> 
>  	drm_modeset_lock_all(drm_dev);
> -	omap_drm_resume_all_displays();
> +	omap_drm_resume_all_displays(drm_dev);
>  	drm_modeset_unlock_all(drm_dev);
> 
>  	drm_kms_helper_poll_enable(drm_dev);
> diff --git a/drivers/gpu/drm/omapdrm/omap_drv.h
> b/drivers/gpu/drm/omapdrm/omap_drv.h index 4bd1e9070b31..cccaae787a7c
> 100644
> --- a/drivers/gpu/drm/omapdrm/omap_drv.h
> +++ b/drivers/gpu/drm/omapdrm/omap_drv.h
> @@ -51,6 +51,9 @@ struct omap_drm_private {
> 
>  	const struct dispc_ops *dispc_ops;
> 
> +	unsigned int num_dssdevs;
> +	struct omap_dss_device *dssdevs[8];
> +
>  	unsigned int num_crtcs;
>  	struct drm_crtc *crtcs[8];


-- 
Regards,

Laurent Pinchart

_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel

  reply	other threads:[~2017-09-01 13:13 UTC|newest]

Thread overview: 29+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2017-08-29  7:32 [RFC 0/7] drm/omap: Module parameter for display order configuration Peter Ujfalusi
2017-08-29  7:32 ` [RFC 1/7] drm/omap: Use devm_kzalloc() to allocate omap_drm_private Peter Ujfalusi
2017-09-01 11:10   ` Laurent Pinchart
2017-09-04  9:13     ` Peter Ujfalusi
2017-09-04  9:41       ` Laurent Pinchart
2017-09-04 11:16         ` Peter Ujfalusi
2017-09-04 14:19           ` Laurent Pinchart
2017-09-05  6:35             ` Peter Ujfalusi
2017-08-29  7:32 ` [RFC 2/7] drm/omap: Allocate drm_device earlier and unref it as last step Peter Ujfalusi
2017-09-01 11:12   ` Laurent Pinchart
2017-08-29  7:32 ` [RFC 3/7] drm/omap: Manage the usable omap_dss_device list within omap_drm_private Peter Ujfalusi
2017-09-01 11:27   ` Laurent Pinchart [this message]
2017-09-04  9:19     ` Peter Ujfalusi
2017-09-04  9:45       ` Laurent Pinchart
2017-08-29  7:32 ` [RFC 4/7] drm/omap: Separate the dssdevs array setup from the connect function Peter Ujfalusi
2017-08-29  7:32 ` [RFC 5/7] drm/omap: Do dss_device (display) ordering in omap_drv.c Peter Ujfalusi
2017-09-01 11:32   ` Laurent Pinchart
2017-09-04  9:26     ` Peter Ujfalusi
2017-09-04  9:46       ` Laurent Pinchart
2017-08-29  7:32 ` [RFC 6/7] drm/omap: dss: Remove display ordering from dss/display.c Peter Ujfalusi
2017-08-29  7:32 ` [RFC 7/7] drm/omap: Add kernel parameter to specify the desired display order Peter Ujfalusi
2017-09-01 11:36 ` [RFC 0/7] drm/omap: Module parameter for display order configuration Laurent Pinchart
2017-09-04 10:03   ` Peter Ujfalusi
2018-05-25 20:09     ` Laurent Pinchart
2017-10-05  9:56 ` Pekka Paalanen
2017-10-05 10:01   ` Tomi Valkeinen
2017-10-05 10:43     ` Pekka Paalanen
2017-10-05 11:24       ` Tomi Valkeinen
2017-10-05 11:54         ` Pekka Paalanen

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=3510335.Tu8AiCYPt6@avalon \
    --to=laurent.pinchart@ideasonboard.com \
    --cc=dri-devel@lists.freedesktop.org \
    --cc=peter.ujfalusi@ti.com \
    --cc=tomi.valkeinen@ti.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox