From: Hans Verkuil <hansverk@cisco.com>
To: Ville Syrjala <ville.syrjala@linux.intel.com>,
dri-devel@lists.freedesktop.org
Cc: intel-gfx@lists.freedesktop.org,
Hans Verkuil <hans.verkuil@cisco.com>,
linux-media@vger.kernel.org
Subject: Re: [PATCH 07/18] video/hdmi: Handle the NTSC VBI infoframe
Date: Fri, 21 Sep 2018 10:30:16 +0200 [thread overview]
Message-ID: <4e790da9-a49c-e4b2-d528-4c6c8bca722e@cisco.com> (raw)
In-Reply-To: <20180920185145.1912-8-ville.syrjala@linux.intel.com>
On 09/20/18 20:51, Ville Syrjala wrote:
> From: Ville Syrjälä <ville.syrjala@linux.intel.com>
>
> Add the code to deal with the NTSC VBI infoframe.
>
> I decided against parsing the PES_data_field and just leave
> it as an opaque blob, just dumping it out as hex in the log.
>
> Blindly typed from the spec, and totally untested.
Do we have any driver that uses this? I would prefer to wait until someone
actually need this.
Regards,
Hans
>
> Cc: Thierry Reding <thierry.reding@gmail.com>
> Cc: Hans Verkuil <hans.verkuil@cisco.com>
> Cc: linux-media@vger.kernel.org
> Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
> ---
> drivers/video/hdmi.c | 208 +++++++++++++++++++++++++++++++++++++++++++++++++++
> include/linux/hdmi.h | 18 +++++
> 2 files changed, 226 insertions(+)
>
> diff --git a/drivers/video/hdmi.c b/drivers/video/hdmi.c
> index 3d24c7746c51..3c320d69fa0a 100644
> --- a/drivers/video/hdmi.c
> +++ b/drivers/video/hdmi.c
> @@ -831,6 +831,139 @@ ssize_t hdmi_mpeg_source_infoframe_pack(struct hdmi_mpeg_source_infoframe *frame
> }
> EXPORT_SYMBOL(hdmi_mpeg_source_infoframe_pack);
>
> +/**
> + * hdmi_ntsc_vbi_infoframe_init() - initialize an HDMI NTSC VBI infoframe
> + * @frame: HDMI NTSC VBI infoframe
> + * @pes_data_field: ANSI/SCTE 127 PES_data_field
> + * @length: ANSI/SCTE 127 PES_data_field length
> + *
> + * Returns 0 on success or a negative error code on failure.
> + */
> +int hdmi_ntsc_vbi_infoframe_init(struct hdmi_ntsc_vbi_infoframe *frame,
> + const void *pes_data_field,
> + size_t length)
> +{
> + if (length < 1 || length > 27)
> + return -EINVAL;
> +
> + memset(frame, 0, sizeof(*frame));
> +
> + frame->type = HDMI_INFOFRAME_TYPE_NTSC_VBI;
> + frame->version = 1;
> + frame->length = length;
> +
> + memcpy(frame->pes_data_field, pes_data_field, length);
> +
> + return 0;
> +}
> +EXPORT_SYMBOL(hdmi_ntsc_vbi_infoframe_init);
> +
> +static int hdmi_ntsc_vbi_infoframe_check_only(const struct hdmi_ntsc_vbi_infoframe *frame)
> +{
> + if (frame->type != HDMI_INFOFRAME_TYPE_NTSC_VBI ||
> + frame->version != 1 ||
> + frame->length < 1 || frame->length > 27)
> + return -EINVAL;
> +
> + if (frame->pes_data_field[0] != 0x99)
> + return -EINVAL;
> +
> + return 0;
> +}
> +
> +/**
> + * hdmi_ntsc_vbi_infoframe_check() - Check and check a HDMI NTSC VBI infoframe
> + * @frame: HDMI NTSC VBI infoframe
> + *
> + * Validates that the infoframe is consistent and updates derived fields
> + * (eg. length) based on other fields.
> + *
> + * Returns 0 on success or a negative error code on failure.
> + */
> +int hdmi_ntsc_vbi_infoframe_check(struct hdmi_ntsc_vbi_infoframe *frame)
> +{
> + return hdmi_ntsc_vbi_infoframe_check_only(frame);
> +}
> +EXPORT_SYMBOL(hdmi_ntsc_vbi_infoframe_check);
> +
> +/**
> + * hdmi_ntsc_vbi_infoframe_pack_only() - write HDMI NTSC VBI infoframe to binary buffer
> + * @frame: HDMI NTSC VBI infoframe
> + * @buffer: destination buffer
> + * @size: size of buffer
> + *
> + * Packs the information contained in the @frame structure into a binary
> + * representation that can be written into the corresponding controller
> + * registers. Also computes the checksum as required by section 5.3.5 of
> + * the HDMI 1.4 specification.
> + *
> + * Returns the number of bytes packed into the binary buffer or a negative
> + * error code on failure.
> + */
> +ssize_t hdmi_ntsc_vbi_infoframe_pack_only(const struct hdmi_ntsc_vbi_infoframe *frame,
> + void *buffer, size_t size)
> +{
> + u8 *ptr = buffer;
> + size_t length;
> + int ret;
> +
> + ret = hdmi_ntsc_vbi_infoframe_check_only(frame);
> + if (ret)
> + return ret;
> +
> + length = HDMI_INFOFRAME_HEADER_SIZE + frame->length;
> +
> + if (size < length)
> + return -ENOSPC;
> +
> + memset(buffer, 0, size);
> +
> + ptr[0] = frame->type;
> + ptr[1] = frame->version;
> + ptr[2] = frame->length;
> + ptr[3] = 0; /* checksum */
> +
> + /* start infoframe payload */
> + ptr += HDMI_INFOFRAME_HEADER_SIZE;
> +
> + memcpy(ptr, frame->pes_data_field, frame->length);
> +
> + hdmi_infoframe_set_checksum(buffer, length);
> +
> + return length;
> +}
> +EXPORT_SYMBOL(hdmi_ntsc_vbi_infoframe_pack_only);
> +
> +/**
> + * hdmi_ntsc_vbi_infoframe_pack() - Check and check a HDMI NTSC VBI infoframe,
> + * and write it to binary buffer
> + * @frame: HDMI NTSC VBI infoframe
> + * @buffer: destination buffer
> + * @size: size of buffer
> + *
> + * Validates that the infoframe is consistent and updates derived fields
> + * (eg. length) based on other fields, after which packs the information
> + * contained in the @frame structure into a binary representation that
> + * can be written into the corresponding controller registers. Also
> + * computes the checksum as required by section 5.3.5 of the HDMI 1.4
> + * specification.
> + *
> + * Returns the number of bytes packed into the binary buffer or a negative
> + * error code on failure.
> + */
> +ssize_t hdmi_ntsc_vbi_infoframe_pack(struct hdmi_ntsc_vbi_infoframe *frame,
> + void *buffer, size_t size)
> +{
> + int ret;
> +
> + ret = hdmi_ntsc_vbi_infoframe_check(frame);
> + if (ret)
> + return ret;
> +
> + return hdmi_ntsc_vbi_infoframe_pack_only(frame, buffer, size);
> +}
> +EXPORT_SYMBOL(hdmi_ntsc_vbi_infoframe_pack);
> +
> /**
> * hdmi_infoframe_check() - Check check a HDMI infoframe
> * @frame: HDMI infoframe
> @@ -854,6 +987,8 @@ hdmi_infoframe_check(union hdmi_infoframe *frame)
> return hdmi_vendor_any_infoframe_check(&frame->vendor);
> case HDMI_INFOFRAME_TYPE_MPEG_SOURCE:
> return hdmi_mpeg_source_infoframe_check(&frame->mpeg_source);
> + case HDMI_INFOFRAME_TYPE_NTSC_VBI:
> + return hdmi_ntsc_vbi_infoframe_check(&frame->ntsc_vbi);
> default:
> WARN(1, "Bad infoframe type %d\n", frame->any.type);
> return -EINVAL;
> @@ -901,6 +1036,10 @@ hdmi_infoframe_pack_only(const union hdmi_infoframe *frame, void *buffer, size_t
> length = hdmi_mpeg_source_infoframe_pack_only(&frame->mpeg_source,
> buffer, size);
> break;
> + case HDMI_INFOFRAME_TYPE_NTSC_VBI:
> + length = hdmi_ntsc_vbi_infoframe_pack_only(&frame->ntsc_vbi,
> + buffer, size);
> + break;
> default:
> WARN(1, "Bad infoframe type %d\n", frame->any.type);
> length = -EINVAL;
> @@ -951,6 +1090,10 @@ hdmi_infoframe_pack(union hdmi_infoframe *frame,
> length = hdmi_mpeg_source_infoframe_pack(&frame->mpeg_source,
> buffer, size);
> break;
> + case HDMI_INFOFRAME_TYPE_NTSC_VBI:
> + length = hdmi_ntsc_vbi_infoframe_pack(&frame->ntsc_vbi,
> + buffer, size);
> + break;
> default:
> WARN(1, "Bad infoframe type %d\n", frame->any.type);
> length = -EINVAL;
> @@ -975,6 +1118,8 @@ static const char *hdmi_infoframe_type_get_name(enum hdmi_infoframe_type type)
> return "Audio";
> case HDMI_INFOFRAME_TYPE_MPEG_SOURCE:
> return "MPEG Source";
> + case HDMI_INFOFRAME_TYPE_NTSC_VBI:
> + return "NTSC VBI";
> }
> return "Reserved";
> }
> @@ -1526,6 +1671,22 @@ static void hdmi_mpeg_source_infoframe_log(const char *level,
> frame->field_repeat ? "Yes" : "No");
> }
>
> +/**
> + * hdmi_ntsc_vbi_infoframe_log() - log info of HDMI NTSC VBI infoframe
> + * @level: logging level
> + * @dev: device
> + * @frame: HDMI NTSC VBI infoframe
> + */
> +static void hdmi_ntsc_vbi_infoframe_log(const char *level,
> + struct device *dev,
> + const struct hdmi_ntsc_vbi_infoframe *frame)
> +{
> + hdmi_infoframe_log_header(level, dev,
> + (const struct hdmi_any_infoframe *)frame);
> +
> + hdmi_log(" %*ph\n", frame->length, frame->pes_data_field);
> +}
> +
> /**
> * hdmi_infoframe_log() - log info of HDMI infoframe
> * @level: logging level
> @@ -1552,6 +1713,9 @@ void hdmi_infoframe_log(const char *level,
> case HDMI_INFOFRAME_TYPE_MPEG_SOURCE:
> hdmi_mpeg_source_infoframe_log(level, dev, &frame->mpeg_source);
> break;
> + case HDMI_INFOFRAME_TYPE_NTSC_VBI:
> + hdmi_ntsc_vbi_infoframe_log(level, dev, &frame->ntsc_vbi);
> + break;
> }
> }
> EXPORT_SYMBOL(hdmi_infoframe_log);
> @@ -1840,6 +2004,47 @@ static int hdmi_mpeg_source_infoframe_unpack(struct hdmi_mpeg_source_infoframe *
> return 0;
> }
>
> +/**
> + * hdmi_ntsc_vbi_infoframe_unpack() - unpack binary buffer to a HDMI MPEG Source infoframe
> + * @frame: HDMI MPEG Source infoframe
> + * @buffer: source buffer
> + * @size: size of buffer
> + *
> + * Unpacks the information contained in binary @buffer into a structured
> + * @frame of the HDMI MPEG Source information frame.
> + * Also verifies the checksum as required by section 5.3.5 of the HDMI 1.4
> + * specification.
> + *
> + * Returns 0 on success or a negative error code on failure.
> + */
> +static int hdmi_ntsc_vbi_infoframe_unpack(struct hdmi_ntsc_vbi_infoframe *frame,
> + const void *buffer, size_t size)
> +{
> + const u8 *ptr = buffer;
> + size_t length;
> +
> + if (size < HDMI_INFOFRAME_HEADER_SIZE)
> + return -EINVAL;
> +
> + if (ptr[0] != HDMI_INFOFRAME_TYPE_NTSC_VBI ||
> + ptr[1] != 1 ||
> + ptr[2] < 1 || ptr[2] > 27)
> + return -EINVAL;
> +
> + length = ptr[2];
> +
> + if (size < HDMI_INFOFRAME_HEADER_SIZE + length)
> + return -EINVAL;
> +
> + if (hdmi_infoframe_checksum(buffer,
> + HDMI_INFOFRAME_HEADER_SIZE + length) != 0)
> + return -EINVAL;
> +
> + ptr += HDMI_INFOFRAME_HEADER_SIZE;
> +
> + return hdmi_ntsc_vbi_infoframe_init(frame, ptr, length);
> +}
> +
> /**
> * hdmi_infoframe_unpack() - unpack binary buffer to a HDMI infoframe
> * @frame: HDMI infoframe
> @@ -1878,6 +2083,9 @@ int hdmi_infoframe_unpack(union hdmi_infoframe *frame,
> case HDMI_INFOFRAME_TYPE_MPEG_SOURCE:
> ret = hdmi_mpeg_source_infoframe_unpack(&frame->mpeg_source, buffer, size);
> break;
> + case HDMI_INFOFRAME_TYPE_NTSC_VBI:
> + ret = hdmi_ntsc_vbi_infoframe_unpack(&frame->ntsc_vbi, buffer, size);
> + break;
> default:
> ret = -EINVAL;
> break;
> diff --git a/include/linux/hdmi.h b/include/linux/hdmi.h
> index 2c9322f7538d..3821516b336c 100644
> --- a/include/linux/hdmi.h
> +++ b/include/linux/hdmi.h
> @@ -48,6 +48,7 @@ enum hdmi_infoframe_type {
> HDMI_INFOFRAME_TYPE_SPD = 0x83,
> HDMI_INFOFRAME_TYPE_AUDIO = 0x84,
> HDMI_INFOFRAME_TYPE_MPEG_SOURCE = 0x85,
> + HDMI_INFOFRAME_TYPE_NTSC_VBI = 0x86,
> };
>
> #define HDMI_IEEE_OUI 0x000c03
> @@ -362,6 +363,21 @@ ssize_t hdmi_mpeg_source_infoframe_pack_only(const struct hdmi_mpeg_source_infof
> void *buffer, size_t size);
> int hdmi_mpeg_source_infoframe_check(struct hdmi_mpeg_source_infoframe *frame);
>
> +struct hdmi_ntsc_vbi_infoframe {
> + enum hdmi_infoframe_type type;
> + unsigned char version;
> + unsigned char length;
> + unsigned char pes_data_field[27];
> +};
> +
> +int hdmi_ntsc_vbi_infoframe_init(struct hdmi_ntsc_vbi_infoframe *frame,
> + const void *pes_data_field, size_t length);
> +ssize_t hdmi_ntsc_vbi_infoframe_pack(struct hdmi_ntsc_vbi_infoframe *frame,
> + void *buffer, size_t size);
> +ssize_t hdmi_ntsc_vbi_infoframe_pack_only(const struct hdmi_ntsc_vbi_infoframe *frame,
> + void *buffer, size_t size);
> +int hdmi_ntsc_vbi_infoframe_check(struct hdmi_ntsc_vbi_infoframe *frame);
> +
> /**
> * union hdmi_infoframe - overall union of all abstract infoframe representations
> * @any: generic infoframe
> @@ -370,6 +386,7 @@ int hdmi_mpeg_source_infoframe_check(struct hdmi_mpeg_source_infoframe *frame);
> * @vendor: union of all vendor infoframes
> * @audio: audio infoframe
> * @mpeg_source: mpeg source infoframe
> + * @ntsc_vbi: ntsc vbi infoframe
> *
> * This is used by the generic pack function. This works since all infoframes
> * have the same header which also indicates which type of infoframe should be
> @@ -382,6 +399,7 @@ union hdmi_infoframe {
> union hdmi_vendor_any_infoframe vendor;
> struct hdmi_audio_infoframe audio;
> struct hdmi_mpeg_source_infoframe mpeg_source;
> + struct hdmi_ntsc_vbi_infoframe ntsc_vbi;
> };
>
> ssize_t hdmi_infoframe_pack(union hdmi_infoframe *frame, void *buffer,
>
_______________________________________________
Intel-gfx mailing list
Intel-gfx@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
next prev parent reply other threads:[~2018-09-21 8:30 UTC|newest]
Thread overview: 59+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-09-20 18:51 [PATCH 00/18] drm/i915: Infoframe precompute/check Ville Syrjala
2018-09-20 18:51 ` [PATCH 01/18] video/hdmi: Constify 'buffer' to the unpack functions Ville Syrjala
2018-09-21 8:03 ` Hans Verkuil
2018-09-20 18:51 ` [PATCH 02/18] video/hdmi: Pass buffer size to infoframe " Ville Syrjala
2018-09-21 8:06 ` Hans Verkuil
2018-09-20 18:51 ` [PATCH 03/18] video/hdmi: Constify infoframe passed to the log functions Ville Syrjala
2018-09-21 8:06 ` Hans Verkuil
2018-09-20 18:51 ` [PATCH 04/18] video/hdmi: Constify infoframe passed to the pack functions Ville Syrjala
2018-09-21 8:24 ` Hans Verkuil
2018-09-21 14:30 ` Ville Syrjälä
2018-09-21 14:33 ` [PATCH v3 " Ville Syrjala
2018-10-01 19:10 ` Ville Syrjälä
2018-10-02 6:37 ` Hans Verkuil
2018-09-20 18:51 ` [PATCH 05/18] video/hdmi: Add an enum for HDMI packet types Ville Syrjala
2018-09-21 8:41 ` Hans Verkuil
2018-09-21 14:01 ` Ville Syrjälä
2018-09-21 14:12 ` Hans Verkuil
2018-09-21 15:07 ` Ville Syrjälä
2018-09-20 18:51 ` [PATCH 06/18] video/hdmi: Handle the MPEG Source infoframe Ville Syrjala
2018-09-21 8:28 ` Hans Verkuil
2018-09-21 13:53 ` Ville Syrjälä
2018-09-21 15:09 ` [PATCH v2 " Ville Syrjala
2018-09-20 18:51 ` [PATCH 07/18] video/hdmi: Handle the NTSC VBI infoframe Ville Syrjala
2018-09-21 8:30 ` Hans Verkuil [this message]
2018-09-21 13:54 ` Ville Syrjälä
2018-09-21 15:10 ` [PATCH v2 " Ville Syrjala
2018-09-20 18:51 ` [PATCH 08/18] drm/i915: Use memmove() for punching the hole into infoframes Ville Syrjala
2018-09-21 13:52 ` Daniel Vetter
2018-09-20 18:51 ` [PATCH 09/18] drm/i915: Pass intel_encoder to infoframe functions Ville Syrjala
2018-09-21 13:59 ` Daniel Vetter
2018-09-21 15:03 ` Ville Syrjälä
2018-09-20 18:51 ` [PATCH 10/18] drm/i915: Add the missing HDMI gamut metadata packet stuff Ville Syrjala
2018-09-21 14:15 ` [Intel-gfx] " Daniel Vetter
2018-09-20 18:51 ` [PATCH 11/18] drm/i915: Return the mask of enabled infoframes from ->inforame_enabled() Ville Syrjala
2018-09-24 15:51 ` Daniel Vetter
2018-09-24 16:36 ` [Intel-gfx] " Ville Syrjälä
2018-10-01 6:55 ` Daniel Vetter
2018-10-01 19:29 ` Ville Syrjälä
2018-09-20 18:51 ` [PATCH 12/18] drm/i915: Store mask of enabled infoframes in the crtc state Ville Syrjala
2018-09-24 15:51 ` [Intel-gfx] " Daniel Vetter
2018-09-20 18:51 ` [PATCH 13/18] drm/i915: Precompute HDMI infoframes Ville Syrjala
2018-09-24 15:58 ` Daniel Vetter
2018-09-24 16:42 ` Ville Syrjälä
2018-09-20 18:51 ` [PATCH 14/18] drm/i915: Read out " Ville Syrjala
2018-09-24 16:08 ` Daniel Vetter
2018-09-24 16:52 ` Ville Syrjälä
2018-09-20 18:51 ` [PATCH 15/18] drm/i915/sdvo: Precompute " Ville Syrjala
2018-09-20 18:51 ` [PATCH 16/18] drm/i915/sdvo: Read out " Ville Syrjala
2018-09-24 16:10 ` [Intel-gfx] " Daniel Vetter
2018-09-24 17:13 ` Ville Syrjälä
2018-10-01 6:59 ` Daniel Vetter
2018-10-01 13:35 ` Ville Syrjälä
2018-10-01 16:48 ` Daniel Vetter
2018-09-20 18:51 ` [PATCH 17/18] drm/i915: Check infoframe state in intel_pipe_config_compare() Ville Syrjala
2018-09-24 16:12 ` Daniel Vetter
2018-10-01 20:35 ` [Intel-gfx] " Ville Syrjälä
2018-10-02 8:16 ` Daniel Vetter
2018-09-20 18:51 ` [PATCH 18/18] drm/i915: Include infoframes in the crtc state dump Ville Syrjala
2018-09-24 16:14 ` [Intel-gfx] " Daniel Vetter
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=4e790da9-a49c-e4b2-d528-4c6c8bca722e@cisco.com \
--to=hansverk@cisco.com \
--cc=dri-devel@lists.freedesktop.org \
--cc=hans.verkuil@cisco.com \
--cc=intel-gfx@lists.freedesktop.org \
--cc=linux-media@vger.kernel.org \
--cc=ville.syrjala@linux.intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).