From: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
To: Tomi Valkeinen <tomi.valkeinen@ti.com>
Cc: dri-devel@lists.freedesktop.org
Subject: Re: [PATCHv2] drm: omapdrm: Register omapdrm platform device in omapdss driver
Date: Wed, 16 Aug 2017 15:31:17 +0300 [thread overview]
Message-ID: <53677268.b9FUsWXrmC@avalon> (raw)
In-Reply-To: <1502876941-7486-1-git-send-email-tomi.valkeinen@ti.com>
Hi Tomi,
Thank you for the patch.
On Wednesday 16 Aug 2017 12:49:01 Tomi Valkeinen wrote:
> From: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
>
> The omapdrm platform device is a virtual device created for the sole
> purpose of handling the omapdss/omapdrm driver split. It should
> eventually be removed. As a first step to ease refactoring move its
> registration from platform code to driver code.
>
> The omapdrm driver name must be changed internally to avoid probing both
> the device registered in platform code and the device registered in the
> omapdss driver, as that would otherwise break bisection.
>
> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
> Reviewed-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
This looks good to me, so
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
I trust that you have tested the patch with module unloading given that was
how you found the original issue :-)
> ---
>
> I reworked this patch to create the platform device dynamically.
>
> drivers/gpu/drm/omapdrm/dss/core.c | 10 ++++++++++
> drivers/gpu/drm/omapdrm/omap_drv.c | 8 +++++++-
> 2 files changed, 17 insertions(+), 1 deletion(-)
>
> diff --git a/drivers/gpu/drm/omapdrm/dss/core.c
> b/drivers/gpu/drm/omapdrm/dss/core.c index 4dabe32c7098..6b3247c4f857
> 100644
> --- a/drivers/gpu/drm/omapdrm/dss/core.c
> +++ b/drivers/gpu/drm/omapdrm/dss/core.c
> @@ -103,6 +103,8 @@ static void (*dss_output_drv_unreg_funcs[])(void) = {
> dss_uninit_platform_driver,
> };
>
> +static struct platform_device *omap_drm_device;
> +
> static int __init omap_dss_init(void)
> {
> int r;
> @@ -118,6 +120,12 @@ static int __init omap_dss_init(void)
> goto err_reg;
> }
>
> + omap_drm_device = platform_device_register_simple("omapdrm_", 0, NULL,
0);
> + if (IS_ERR(omap_drm_device)) {
> + r = PTR_ERR(omap_drm_device);
> + goto err_reg;
> + }
> +
> return 0;
>
> err_reg:
> @@ -135,6 +143,8 @@ static void __exit omap_dss_exit(void)
> {
> int i;
>
> + platform_device_unregister(omap_drm_device);
> +
> for (i = 0; i < ARRAY_SIZE(dss_output_drv_unreg_funcs); ++i)
> dss_output_drv_unreg_funcs[i]();
>
> diff --git a/drivers/gpu/drm/omapdrm/omap_drv.c
> b/drivers/gpu/drm/omapdrm/omap_drv.c index 10e24ca928f2..2b990daf0052
> 100644
> --- a/drivers/gpu/drm/omapdrm/omap_drv.c
> +++ b/drivers/gpu/drm/omapdrm/omap_drv.c
> @@ -575,6 +575,12 @@ static int pdev_probe(struct platform_device *pdev)
> if (omapdss_is_initialized() == false)
> return -EPROBE_DEFER;
>
> + ret = dma_set_coherent_mask(&pdev->dev, DMA_BIT_MASK(32));
> + if (ret) {
> + dev_err(&pdev->dev, "Failed to set the DMA mask\n");
> + return ret;
> + }
> +
> omap_crtc_pre_init();
>
> ret = omap_connect_dssdevs();
> @@ -762,7 +768,7 @@ static SIMPLE_DEV_PM_OPS(omapdrm_pm_ops,
> omap_drm_suspend, omap_drm_resume);
>
> static struct platform_driver pdev = {
> .driver = {
> - .name = DRIVER_NAME,
> + .name = "omapdrm_",
> .pm = &omapdrm_pm_ops,
> },
> .probe = pdev_probe,
--
Regards,
Laurent Pinchart
_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel
next prev parent reply other threads:[~2017-08-16 12:30 UTC|newest]
Thread overview: 19+ messages / expand[flat|nested] mbox.gz Atom feed top
2017-08-11 13:49 [PATCH v3 00/11] omapdrm: Remove the omapdrm and omapdss devices from platform code Laurent Pinchart
2017-08-11 13:49 ` [PATCH v3 01/11] drm: omapdrm: hdmi: Rename functions and structures to use hdmi_ prefix Laurent Pinchart
2017-08-11 13:49 ` [PATCH v3 02/11] drm: omapdrm: hdmi: Replace OMAP SoC model check with HDMI xmit version Laurent Pinchart
2017-08-11 13:49 ` [PATCH v3 03/11] drm: omapdrm: hdmi: Pass HDMI core version as integer to HDMI audio Laurent Pinchart
2017-08-11 14:38 ` Bartlomiej Zolnierkiewicz
2017-08-11 13:49 ` [PATCH v3 04/11] drm: omapdrm: hdmi: Configure the PLL from the HDMI core version Laurent Pinchart
2017-08-11 13:49 ` [PATCH v3 05/11] drm: omapdrm: hdmi: Configure the PHY " Laurent Pinchart
2017-08-11 13:49 ` [PATCH v3 06/11] drm: omapdrm: hdmi: Don't allocate PHY features dynamically Laurent Pinchart
2017-08-11 13:49 ` [PATCH v3 07/11] drm: omapdrm: Register omapdrm platform device in omapdss driver Laurent Pinchart
2017-08-15 12:13 ` Tomi Valkeinen
2017-08-16 9:49 ` [PATCHv2] " Tomi Valkeinen
2017-08-16 12:31 ` Laurent Pinchart [this message]
2017-09-28 8:03 ` [PATCH v3 07/11] " Tomi Valkeinen
2017-09-28 8:56 ` Laurent Pinchart
2017-09-28 9:25 ` Tomi Valkeinen
2017-08-11 13:49 ` [PATCH v3 08/11] drm: omapdrm: Remove the " Laurent Pinchart
2017-08-11 13:49 ` [PATCH v3 09/11] ARM: OMAP2+: Remove unused omapdrm platform device Laurent Pinchart
2017-08-11 13:49 ` [PATCH v3 10/11] ARM: OMAP2+: Don't register omapdss device for omapdrm Laurent Pinchart
2017-08-11 13:49 ` [PATCH v3 11/11] drm: omapdrm: Remove omapdrm platform data Laurent Pinchart
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=53677268.b9FUsWXrmC@avalon \
--to=laurent.pinchart@ideasonboard.com \
--cc=dri-devel@lists.freedesktop.org \
--cc=tomi.valkeinen@ti.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox