dri-devel Archive on lore.kernel.org
 help / color / mirror / Atom feed
From: Inki Dae <inki.dae@samsung.com>
To: Andrzej Hajda <a.hajda@samsung.com>
Cc: Joonyoung Shim <jy0922.shim@samsung.com>,
	Seung-Woo Kim <sw0312.kim@samsung.com>,
	Kyungmin Park <kyungmin.park@samsung.com>,
	David Airlie <airlied@linux.ie>,
	Kukjin Kim <kgene.kim@samsung.com>,
	"open list:DRM DRIVERS FOR E..."
	<dri-devel@lists.freedesktop.org>,
	"moderated list:ARM/S5P EXYNOS AR..."
	<linux-samsung-soc@vger.kernel.org>,
	open list <linux-kernel@vger.kernel.org>,
	drake@endlessm.com, daniel@ffwll.ch, m.szyprowski@samsung.com
Subject: Re: [PATCH] drm/exynos: init vblank with real number of crtcs
Date: Wed, 08 Oct 2014 00:28:28 +0900	[thread overview]
Message-ID: <5434069C.3030004@samsung.com> (raw)
In-Reply-To: <5433DC15.5000000@samsung.com>


Sorry for late.

On 2014년 10월 07일 21:27, Andrzej Hajda wrote:
> Hi Inki,
> 
> Gently ping.
> 
> Andrzej
> 
> 
> On 09/19/2014 02:57 PM, Andrzej Hajda wrote:
>> Initialization of vblank with MAX_CRTC caused attempts
>> to disabling vblanks for non-existing crtcs in case
>> drm used fewer crtcs. The patch fixes it.

Nice catch~ This patch also resolves unbind issue. When exynos driver is
unbound, disable_vblank callback is called as dev->num_crtcs so if the
number of probed crtc drivers is different from the one of enabled crtc
drivers then it could attempt to disabling vblank for non-existing crtc,
which in turn, null pointer access occurs.

Thanks,
Inki Dae

>>
>> Signed-off-by: Andrzej Hajda <a.hajda@samsung.com>
>> ---
>>  drivers/gpu/drm/exynos/exynos_drm_drv.c | 18 +++++++++---------
>>  1 file changed, 9 insertions(+), 9 deletions(-)
>>
>> diff --git a/drivers/gpu/drm/exynos/exynos_drm_drv.c b/drivers/gpu/drm/exynos/exynos_drm_drv.c
>> index 9b00e4e..dc4affd 100644
>> --- a/drivers/gpu/drm/exynos/exynos_drm_drv.c
>> +++ b/drivers/gpu/drm/exynos/exynos_drm_drv.c
>> @@ -94,10 +94,6 @@ static int exynos_drm_load(struct drm_device *dev, unsigned long flags)
>>  	/* init kms poll for handling hpd */
>>  	drm_kms_helper_poll_init(dev);
>>  
>> -	ret = drm_vblank_init(dev, MAX_CRTC);
>> -	if (ret)
>> -		goto err_mode_config_cleanup;
>> -
>>  	/* setup possible_clones. */
>>  	exynos_drm_encoder_setup(dev);
>>  
>> @@ -106,22 +102,26 @@ static int exynos_drm_load(struct drm_device *dev, unsigned long flags)
>>  	/* Try to bind all sub drivers. */
>>  	ret = component_bind_all(dev->dev, dev);
>>  	if (ret)
>> -		goto err_cleanup_vblank;
>> +		goto err_mode_config_cleanup;
>> +
>> +	ret = drm_vblank_init(dev, dev->mode_config.num_crtc);
>> +	if (ret)
>> +		goto err_unbind_all;
>>  
>>  	/* Probe non kms sub drivers and virtual display driver. */
>>  	ret = exynos_drm_device_subdrv_probe(dev);
>>  	if (ret)
>> -		goto err_unbind_all;
>> +		goto err_cleanup_vblank;
>>  
>>  	/* force connectors detection */
>>  	drm_helper_hpd_irq_event(dev);
>>  
>>  	return 0;
>>  
>> -err_unbind_all:
>> -	component_unbind_all(dev->dev, dev);
>>  err_cleanup_vblank:
>>  	drm_vblank_cleanup(dev);
>> +err_unbind_all:
>> +	component_unbind_all(dev->dev, dev);
>>  err_mode_config_cleanup:
>>  	drm_mode_config_cleanup(dev);
>>  	drm_release_iommu_mapping(dev);
>> @@ -138,8 +138,8 @@ static int exynos_drm_unload(struct drm_device *dev)
>>  	exynos_drm_fbdev_fini(dev);
>>  	drm_kms_helper_poll_fini(dev);
>>  
>> -	component_unbind_all(dev->dev, dev);
>>  	drm_vblank_cleanup(dev);
>> +	component_unbind_all(dev->dev, dev);
>>  	drm_mode_config_cleanup(dev);
>>  	drm_release_iommu_mapping(dev);
>>  
>>
> 
> 

  reply	other threads:[~2014-10-07 15:28 UTC|newest]

Thread overview: 5+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2014-09-19 12:57 [PATCH] drm/exynos: init vblank with real number of crtcs Andrzej Hajda
2014-09-19 15:31 ` Daniel Vetter
2014-10-07 12:27 ` Andrzej Hajda
2014-10-07 15:28   ` Inki Dae [this message]
2014-10-08  1:33     ` Inki Dae

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=5434069C.3030004@samsung.com \
    --to=inki.dae@samsung.com \
    --cc=a.hajda@samsung.com \
    --cc=airlied@linux.ie \
    --cc=daniel@ffwll.ch \
    --cc=drake@endlessm.com \
    --cc=dri-devel@lists.freedesktop.org \
    --cc=jy0922.shim@samsung.com \
    --cc=kgene.kim@samsung.com \
    --cc=kyungmin.park@samsung.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-samsung-soc@vger.kernel.org \
    --cc=m.szyprowski@samsung.com \
    --cc=sw0312.kim@samsung.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox