dri-devel Archive on lore.kernel.org
 help / color / mirror / Atom feed
From: Vincent ABRIOU <vincent.abriou@st.com>
To: Daniel Vetter <daniel@ffwll.ch>
Cc: Nicolas VANHAELEWYN <nicolas.vanhaelewyn@st.com>,
	Benjamin Gaignard <benjamin.gaignard@linaro.org>,
	Fabien DESSENNE <fabien.dessenne@st.com>,
	"dri-devel@lists.freedesktop.org"
	<dri-devel@lists.freedesktop.org>
Subject: Re: [PATCH 1/1] drm/sti: enable fbdev compatibility through module param
Date: Fri, 30 Oct 2015 13:22:27 +0100	[thread overview]
Message-ID: <56336103.8090207@st.com> (raw)
In-Reply-To: <20151030103847.GX16848@phenom.ffwll.local>



On 10/30/2015 11:38 AM, Daniel Vetter wrote:
> On Thu, Oct 29, 2015 at 02:02:29PM +0100, Vincent Abriou wrote:
>> DRM_STI_FBDEV is removed and replaced by the fbdev module param.
>> By default, the fbdev compatibility is disabled.
>>
>> Signed-off-by: Vincent Abriou <vincent.abriou@st.com>
>> Signed-off-by: Nicolas VANHAELEWYN <nicolas.vanhaelewyn@st.com>
>
> Already replied somewhere else, but we have this in the core fb helpers
> with drm_kms_helper.fbdev_emulation module option. Just make sure that one
> works for sti.
> -Daniel
>

I was not aware about this.
fbdev_emulation module option works fine for sti driver.
This patch could be abandonned
Thanks
Vincent

>> ---
>>   drivers/gpu/drm/sti/Kconfig   |  6 ------
>>   drivers/gpu/drm/sti/sti_drv.c | 15 ++++++++++-----
>>   2 files changed, 10 insertions(+), 11 deletions(-)
>>
>> diff --git a/drivers/gpu/drm/sti/Kconfig b/drivers/gpu/drm/sti/Kconfig
>> index 0a9048c..3f8d590 100644
>> --- a/drivers/gpu/drm/sti/Kconfig
>> +++ b/drivers/gpu/drm/sti/Kconfig
>> @@ -10,9 +10,3 @@ config DRM_STI
>>   	select FW_LOADER_USER_HELPER_FALLBACK
>>   	help
>>   	  Choose this option to enable DRM on STM stiH41x chipset
>> -
>> -config DRM_STI_FBDEV
>> -	bool "DRM frame buffer device for STMicroelectronics SoC stiH41x Serie"
>> -	depends on DRM_STI
>> -	help
>> -	  Choose this option to enable FBDEV on top of DRM for STM stiH41x chipset
>> diff --git a/drivers/gpu/drm/sti/sti_drv.c b/drivers/gpu/drm/sti/sti_drv.c
>> index e19c173..d47b025 100644
>> --- a/drivers/gpu/drm/sti/sti_drv.c
>> +++ b/drivers/gpu/drm/sti/sti_drv.c
>> @@ -30,6 +30,11 @@
>>   #define STI_MAX_FB_HEIGHT	4096
>>   #define STI_MAX_FB_WIDTH	4096
>>
>> +/* Module parameter to enable fbdev compatibility */
>> +static bool fbdev_enabled;
>> +MODULE_PARM_DESC(fbdev, "Enable fbdev compatibility layer");
>> +module_param_named(fbdev, fbdev_enabled, bool, 0644);
>> +
>>   static void sti_atomic_schedule(struct sti_private *private,
>>   				struct drm_atomic_state *state)
>>   {
>> @@ -160,11 +165,11 @@ static int sti_load(struct drm_device *dev, unsigned long flags)
>>
>>   	drm_mode_config_reset(dev);
>>
>> -#ifdef CONFIG_DRM_STI_FBDEV
>> -	drm_fbdev_cma_init(dev, 32,
>> -			   dev->mode_config.num_crtc,
>> -			   dev->mode_config.num_connector);
>> -#endif
>> +	if (fbdev_enabled)
>> +		drm_fbdev_cma_init(dev, 32,
>> +				   dev->mode_config.num_crtc,
>> +				   dev->mode_config.num_connector);
>> +
>>   	return 0;
>>   }
>>
>> --
>> 1.9.1
>>
>> _______________________________________________
>> dri-devel mailing list
>> dri-devel@lists.freedesktop.org
>> http://lists.freedesktop.org/mailman/listinfo/dri-devel
>
_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
http://lists.freedesktop.org/mailman/listinfo/dri-devel

      reply	other threads:[~2015-10-30 12:22 UTC|newest]

Thread overview: 3+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2015-10-29 13:02 [PATCH 1/1] drm/sti: enable fbdev compatibility through module param Vincent Abriou
2015-10-30 10:38 ` Daniel Vetter
2015-10-30 12:22   ` Vincent ABRIOU [this message]

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=56336103.8090207@st.com \
    --to=vincent.abriou@st.com \
    --cc=benjamin.gaignard@linaro.org \
    --cc=daniel@ffwll.ch \
    --cc=dri-devel@lists.freedesktop.org \
    --cc=fabien.dessenne@st.com \
    --cc=nicolas.vanhaelewyn@st.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox