Re: [PATCH 1/2] video:omap2:dss: fix timings for VENC to match what omapdrm expects

[Tomi Valkeinen <tomi.valkeinen@ti.com>]

[-- Attachment #1.1: Type: text/plain, Size: 2062 bytes --]


On 13/11/15 12:29, H. Nikolaus Schaller wrote:
> Otherwise check_timings fails and we get a "has no modes" message
> from xrandr.
> 
> This fix makes the venc assume PAL and NTSC timings that match the
> timings synthetized by copy_timings_drm_to_omap() from omapdrm
> mode settings so that check_timings() succeeds.
> 
> Tested on: BeagleBoard XM, GTA04 and OpenPandora
> 
> Signed-off-by: H. Nikolaus Schaller <hns@goldelico.com>
> ---
>  drivers/video/fbdev/omap2/dss/venc.c | 12 ++++++++++++
>  1 file changed, 12 insertions(+)

I've picked this up.

With this patch and the one below I can get tv-out working on my very old
beagleboard, and it seems to work with X also. It doesn't start automatically
as the connection state is unknown, but doing "xrandr --output None-1 --auto"
was all I needed to enable it.

 Tomi

From a4274600a5a67256b91266b0d2624b9c9028909b Mon Sep 17 00:00:00 2001
From: Tomi Valkeinen <tomi.valkeinen@ti.com>
Date: Tue, 8 Dec 2015 18:32:14 +0200
Subject: [PATCH] drm/omap: fix fbdev pix format to support all platforms

omap_fbdev always creates a framebuffer with ARGB8888 pixel format. On
OMAP3 we have VIDEO1 overlay that does not support ARGB8888, and on
OMAP2 none of the overlays support ARGB888.

This patch changes the omap_fbdev's fb to XRGB8888, which is supported
by all platforms.

Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>

diff --git a/drivers/gpu/drm/omapdrm/omap_fbdev.c b/drivers/gpu/drm/omapdrm/omap_fbdev.c
index b8e4cdec28c3..24f92bea39c7 100644
--- a/drivers/gpu/drm/omapdrm/omap_fbdev.c
+++ b/drivers/gpu/drm/omapdrm/omap_fbdev.c
@@ -112,11 +112,8 @@ static int omap_fbdev_create(struct drm_fb_helper *helper,
 	dma_addr_t paddr;
 	int ret;
 
-	/* only doing ARGB32 since this is what is needed to alpha-blend
-	 * with video overlays:
-	 */
 	sizes->surface_bpp = 32;
-	sizes->surface_depth = 32;
+	sizes->surface_depth = 24;
 
 	DBG("create fbdev: %dx%d@%d (%dx%d)", sizes->surface_width,
 			sizes->surface_height, sizes->surface_bpp,


[-- Attachment #1.2: OpenPGP digital signature --]
[-- Type: application/pgp-signature, Size: 819 bytes --]

[-- Attachment #2: Type: text/plain, Size: 159 bytes --]

_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
http://lists.freedesktop.org/mailman/listinfo/dri-devel