dri-devel Archive on lore.kernel.org
 help / color / mirror / Atom feed
From: "Christian König" <christian.koenig@amd.com>
To: Thierry Reding <thierry.reding@gmail.com>,
	Alex Deucher <alexander.deucher@amd.com>
Cc: dri-devel@lists.freedesktop.org
Subject: Re: [PATCH] drm/radeon: Update radeon_get_vblank_counter_kms()
Date: Wed, 16 Dec 2015 15:36:45 +0100	[thread overview]
Message-ID: <567176FD.3030502@amd.com> (raw)
In-Reply-To: <1450276307-13032-1-git-send-email-thierry.reding@gmail.com>

On 16.12.2015 15:31, Thierry Reding wrote:
> From: Thierry Reding <treding@nvidia.com>
>
> Commit 88e72717c2de ("drm/irq: Use unsigned int pipe in public API")
> updated the prototype of this function but not the implementation. This
> wasn't noticed even through compile tests because the prototype is part
> of the source file that uses it and hence the compiler won't know the
> prototype when it compiles the implementation.
>
> The right thing would've been to move the prototype to a header that's
> included in radeon_kms.c so that the implementation signature could be
> checked against it, but the closest thing would've been radeon_drv.h
> and including that results in a lot of build errors, so we'll leave it
> as is for now.

Yeah, that's because of the old UMS mess. We could probably clean that 
up now.

>
> Cc: Christian König <christian.koenig@amd.com>
> Cc: Alex Deucher <alexander.deucher@amd.com>
> Signed-off-by: Thierry Reding <treding@nvidia.com>

Anyway patch is Reviewed-by: Christian König <christian.koenig@amd.com>

Regards,
Christian.

> ---
> Note that this doesn't really need to go into stable because the
> generated code should be the same.
>
>   drivers/gpu/drm/radeon/radeon_kms.c | 24 ++++++++++++------------
>   1 file changed, 12 insertions(+), 12 deletions(-)
>
> diff --git a/drivers/gpu/drm/radeon/radeon_kms.c b/drivers/gpu/drm/radeon/radeon_kms.c
> index d290a8a09036..4fab44e0f36b 100644
> --- a/drivers/gpu/drm/radeon/radeon_kms.c
> +++ b/drivers/gpu/drm/radeon/radeon_kms.c
> @@ -748,19 +748,19 @@ void radeon_driver_preclose_kms(struct drm_device *dev,
>    * radeon_get_vblank_counter_kms - get frame count
>    *
>    * @dev: drm dev pointer
> - * @crtc: crtc to get the frame count from
> + * @pipe: crtc to get the frame count from
>    *
>    * Gets the frame count on the requested crtc (all asics).
>    * Returns frame count on success, -EINVAL on failure.
>    */
> -u32 radeon_get_vblank_counter_kms(struct drm_device *dev, int crtc)
> +u32 radeon_get_vblank_counter_kms(struct drm_device *dev, unsigned int pipe)
>   {
>   	int vpos, hpos, stat;
>   	u32 count;
>   	struct radeon_device *rdev = dev->dev_private;
>   
> -	if (crtc < 0 || crtc >= rdev->num_crtc) {
> -		DRM_ERROR("Invalid crtc %d\n", crtc);
> +	if (pipe < 0 || pipe >= rdev->num_crtc) {
> +		DRM_ERROR("Invalid crtc %u\n", pipe);
>   		return -EINVAL;
>   	}
>   
> @@ -772,29 +772,29 @@ u32 radeon_get_vblank_counter_kms(struct drm_device *dev, int crtc)
>   	 * and start of vsync, so vpos >= 0 means to bump the hw frame counter
>   	 * result by 1 to give the proper appearance to caller.
>   	 */
> -	if (rdev->mode_info.crtcs[crtc]) {
> +	if (rdev->mode_info.crtcs[pipe]) {
>   		/* Repeat readout if needed to provide stable result if
>   		 * we cross start of vsync during the queries.
>   		 */
>   		do {
> -			count = radeon_get_vblank_counter(rdev, crtc);
> +			count = radeon_get_vblank_counter(rdev, pipe);
>   			/* Ask radeon_get_crtc_scanoutpos to return vpos as
>   			 * distance to start of vblank, instead of regular
>   			 * vertical scanout pos.
>   			 */
>   			stat = radeon_get_crtc_scanoutpos(
> -				dev, crtc, GET_DISTANCE_TO_VBLANKSTART,
> +				dev, pipe, GET_DISTANCE_TO_VBLANKSTART,
>   				&vpos, &hpos, NULL, NULL,
> -				&rdev->mode_info.crtcs[crtc]->base.hwmode);
> -		} while (count != radeon_get_vblank_counter(rdev, crtc));
> +				&rdev->mode_info.crtcs[pipe]->base.hwmode);
> +		} while (count != radeon_get_vblank_counter(rdev, pipe));
>   
>   		if (((stat & (DRM_SCANOUTPOS_VALID | DRM_SCANOUTPOS_ACCURATE)) !=
>   		    (DRM_SCANOUTPOS_VALID | DRM_SCANOUTPOS_ACCURATE))) {
>   			DRM_DEBUG_VBL("Query failed! stat %d\n", stat);
>   		}
>   		else {
> -			DRM_DEBUG_VBL("crtc %d: dist from vblank start %d\n",
> -				      crtc, vpos);
> +			DRM_DEBUG_VBL("crtc %u: dist from vblank start %d\n",
> +				      pipe, vpos);
>   
>   			/* Bump counter if we are at >= leading edge of vblank,
>   			 * but before vsync where vpos would turn negative and
> @@ -806,7 +806,7 @@ u32 radeon_get_vblank_counter_kms(struct drm_device *dev, int crtc)
>   	}
>   	else {
>   	    /* Fallback to use value as is. */
> -	    count = radeon_get_vblank_counter(rdev, crtc);
> +	    count = radeon_get_vblank_counter(rdev, pipe);
>   	    DRM_DEBUG_VBL("NULL mode info! Returned count may be wrong.\n");
>   	}
>   

_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
http://lists.freedesktop.org/mailman/listinfo/dri-devel

  reply	other threads:[~2015-12-16 14:37 UTC|newest]

Thread overview: 7+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2015-12-16 14:31 [PATCH] drm/radeon: Update radeon_get_vblank_counter_kms() Thierry Reding
2015-12-16 14:36 ` Christian König [this message]
2015-12-17  6:35 ` Michel Dänzer
2016-01-04 11:28   ` Thierry Reding
  -- strict thread matches above, loose matches on Subject: below --
2016-01-04 15:44 Thierry Reding
2016-01-04 16:45 ` Alex Deucher
2016-01-04 17:19   ` Thierry Reding

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=567176FD.3030502@amd.com \
    --to=christian.koenig@amd.com \
    --cc=alexander.deucher@amd.com \
    --cc=dri-devel@lists.freedesktop.org \
    --cc=thierry.reding@gmail.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox