dri-devel Archive on lore.kernel.org
 help / color / mirror / Atom feed
From: Inki Dae <inki.dae@samsung.com>
To: Chanho Park <parkch98@gmail.com>, Kukjin Kim <kgene@kernel.org>,
	Krzysztof Kozlowski <k.kozlowski@samsung.com>,
	linux-samsung-soc@vger.kernel.org,
	dri-devel@lists.freedesktop.org
Cc: Chanho Park <chanho61.park@samsung.com>,
	Joonyoung Shim <jy0922.shim@samsung.com>,
	Seung-Woo Kim <sw0312.kim@samsung.com>
Subject: Re: [PATCH 1/2] drm/exynos: add exynos5420 support for fimd
Date: Tue, 23 Feb 2016 19:46:13 +0900	[thread overview]
Message-ID: <56CC3875.6060109@samsung.com> (raw)
In-Reply-To: <1455283900-6913-2-git-send-email-chanho61.park@samsung.com>

Picked it up.

Thanks,
Inki Dae

2016년 02월 12일 22:31에 Chanho Park 이(가) 쓴 글:
> This patch adds a exynos5420 driver data to support mic_bypass
> option to bypass the mic from display out path.
> The mic(Mobile image compressor) compresses RGB data from fimd
> and send the compressed data to the mipi dsi.
> The bypass option can be founded from system register and the bit
> is 11. The option bit has been introduced since exynos5420. The
> only difference between exynos5250 and exynos5420/exynos5422 is
> existence of the bit. Until the MIC is defined and enabled from
> device tree, the bypass mic will be default option.
> 
> Cc: Inki Dae <inki.dae@samsung.com>
> Cc: Joonyoung Shim <jy0922.shim@samsung.com>
> Cc: Seung-Woo Kim <sw0312.kim@samsung.com>
> Signed-off-by: Chanho Park <chanho61.park@samsung.com>
> ---
>  .../bindings/display/exynos/samsung-fimd.txt       |  3 ++-
>  drivers/gpu/drm/exynos/exynos_drm_fimd.c           | 31 +++++++++++++++++++++-
>  2 files changed, 32 insertions(+), 2 deletions(-)
> 
> diff --git a/Documentation/devicetree/bindings/display/exynos/samsung-fimd.txt b/Documentation/devicetree/bindings/display/exynos/samsung-fimd.txt
> index 27c3ce0..c7c6b9a 100644
> --- a/Documentation/devicetree/bindings/display/exynos/samsung-fimd.txt
> +++ b/Documentation/devicetree/bindings/display/exynos/samsung-fimd.txt
> @@ -12,7 +12,8 @@ Required properties:
>  		"samsung,exynos3250-fimd"; /* for Exynos3250/3472 SoCs */
>  		"samsung,exynos4210-fimd"; /* for Exynos4 SoCs */
>  		"samsung,exynos4415-fimd"; /* for Exynos4415 SoC */
> -		"samsung,exynos5250-fimd"; /* for Exynos5 SoCs */
> +		"samsung,exynos5250-fimd"; /* for Exynos5250 SoCs */
> +		"samsung,exynos5420-fimd"; /* for Exynos5420/5422/5800 SoCs */
>  
>  - reg: physical base address and length of the FIMD registers set.
>  
> diff --git a/drivers/gpu/drm/exynos/exynos_drm_fimd.c b/drivers/gpu/drm/exynos/exynos_drm_fimd.c
> index 70194d0..41c3bb2 100644
> --- a/drivers/gpu/drm/exynos/exynos_drm_fimd.c
> +++ b/drivers/gpu/drm/exynos/exynos_drm_fimd.c
> @@ -94,12 +94,14 @@ struct fimd_driver_data {
>  	unsigned int lcdblk_offset;
>  	unsigned int lcdblk_vt_shift;
>  	unsigned int lcdblk_bypass_shift;
> +	unsigned int lcdblk_mic_bypass_shift;
>  
>  	unsigned int has_shadowcon:1;
>  	unsigned int has_clksel:1;
>  	unsigned int has_limited_fmt:1;
>  	unsigned int has_vidoutcon:1;
>  	unsigned int has_vtsel:1;
> +	unsigned int has_mic_bypass:1;
>  };
>  
>  static struct fimd_driver_data s3c64xx_fimd_driver_data = {
> @@ -145,6 +147,18 @@ static struct fimd_driver_data exynos5_fimd_driver_data = {
>  	.has_vtsel = 1,
>  };
>  
> +static struct fimd_driver_data exynos5420_fimd_driver_data = {
> +	.timing_base = 0x20000,
> +	.lcdblk_offset = 0x214,
> +	.lcdblk_vt_shift = 24,
> +	.lcdblk_bypass_shift = 15,
> +	.lcdblk_mic_bypass_shift = 11,
> +	.has_shadowcon = 1,
> +	.has_vidoutcon = 1,
> +	.has_vtsel = 1,
> +	.has_mic_bypass = 1,
> +};
> +
>  struct fimd_context {
>  	struct device			*dev;
>  	struct drm_device		*drm_dev;
> @@ -184,6 +198,8 @@ static const struct of_device_id fimd_driver_dt_match[] = {
>  	  .data = &exynos4415_fimd_driver_data },
>  	{ .compatible = "samsung,exynos5250-fimd",
>  	  .data = &exynos5_fimd_driver_data },
> +	{ .compatible = "samsung,exynos5420-fimd",
> +	  .data = &exynos5420_fimd_driver_data },
>  	{},
>  };
>  MODULE_DEVICE_TABLE(of, fimd_driver_dt_match);
> @@ -461,6 +477,18 @@ static void fimd_commit(struct exynos_drm_crtc *crtc)
>  		return;
>  	}
>  
> +	/* TODO: When MIC is enabled for display path, the lcdblk_mic_bypass
> +	 * bit should be cleared.
> +	 */
> +	if (driver_data->has_mic_bypass && ctx->sysreg &&
> +	    regmap_update_bits(ctx->sysreg,
> +				driver_data->lcdblk_offset,
> +				0x1 << driver_data->lcdblk_mic_bypass_shift,
> +				0x1 << driver_data->lcdblk_mic_bypass_shift)) {
> +		DRM_ERROR("Failed to update sysreg for bypass mic.\n");
> +		return;
> +	}
> +
>  	/* setup horizontal and vertical display size. */
>  	val = VIDTCON2_LINEVAL(mode->vdisplay - 1) |
>  	       VIDTCON2_HOZVAL(mode->hdisplay - 1) |
> @@ -861,7 +889,8 @@ static void fimd_dp_clock_enable(struct exynos_drm_crtc *crtc, bool enable)
>  	 * clock. On these SoCs the bootloader may enable it but any
>  	 * power domain off/on will reset it to disable state.
>  	 */
> -	if (ctx->driver_data != &exynos5_fimd_driver_data)
> +	if (ctx->driver_data != &exynos5_fimd_driver_data ||
> +	    ctx->driver_data != &exynos5420_fimd_driver_data)
>  		return;
>  
>  	val = enable ? DP_MIE_CLK_DP_ENABLE : DP_MIE_CLK_DISABLE;
> 

  reply	other threads:[~2016-02-23 10:46 UTC|newest]

Thread overview: 8+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2016-02-12 13:31 [PATCH 0/2] Support exynos5420-fimd Chanho Park
2016-02-12 13:31 ` [PATCH 1/2] drm/exynos: add exynos5420 support for fimd Chanho Park
2016-02-23 10:46   ` Inki Dae [this message]
2016-02-12 13:31 ` [PATCH 2/2] ARM: dts: add exynos5420-fimd compatible Chanho Park
2016-02-15  0:57   ` Krzysztof Kozlowski
2016-02-15  3:59     ` Krzysztof Kozlowski
2016-04-21 10:06       ` Krzysztof Kozlowski
2016-04-21 13:11         ` Inki Dae

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=56CC3875.6060109@samsung.com \
    --to=inki.dae@samsung.com \
    --cc=chanho61.park@samsung.com \
    --cc=dri-devel@lists.freedesktop.org \
    --cc=jy0922.shim@samsung.com \
    --cc=k.kozlowski@samsung.com \
    --cc=kgene@kernel.org \
    --cc=linux-samsung-soc@vger.kernel.org \
    --cc=parkch98@gmail.com \
    --cc=sw0312.kim@samsung.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox