From: Thomas Hellstrom <thellstrom@vmware.com>
To: Sebastian Herbszt <herbszt@gmx.de>, dri-devel@lists.freedesktop.org
Subject: Re: boot hang with vmwgfx on 4.5-rc6
Date: Fri, 4 Mar 2016 23:39:59 +0100 [thread overview]
Message-ID: <56DA0EBF.8070609@vmware.com> (raw)
In-Reply-To: <20160229223824.000026b0@localhost>
Hi!
Thanks for reporting. It appears that on hardware version 9, we get a
NULL pointer dereference
on kernel 4.5.
[ 15.298499] BUG: unable to handle kernel NULL pointer dereference
at (null)
[ 15.301027] IP: [< (null)>] (null)
[ 15.302590] PGD 0
[ 15.303276] Oops: 0010 [#1] SMP
[ 15.304385] Modules linked in: xt_conntrack ebtable_filter
ebtable_nat ebtable_broute bridge stp llc ebtables ip6table_security
ip6table_raw ip6table_mangle ip6table_nat nf_conntrack_ipv6
nf_defrag_ipv6 nf_nat_ipv6 ip6table_filter ip6_tables iptable_security
iptable_raw iptable_mangle iptable_nat nf_conntrack_ipv4 nf_defrag_ipv4
nf_nat_ipv4 nf_nat nf_conntrack vmw_vsock_vmci_transport vsock
snd_seq_midi bnep snd_seq_midi_event btusb btrtl snd_ens1371 gameport
btbcm snd_ac97_codec btintel ppdev ac97_bus snd_seq coretemp
crct10dif_pclmul crc32_pclmul bluetooth snd_pcm crc32c_intel vmw_balloon
ghash_clmulni_intel snd_rawmidi snd_timer snd_seq_device snd rfkill
soundcore vmw_vmci shpchp i2c_piix4 nfit parport_pc parport acpi_cpufreq
nfsd auth_rpcgss nfs_acl lockd grace sunrpc vmwgfx serio_raw
drm_kms_helper vmw_pvscsi vmxnet3 ttm drm ata_generic pata_acpi
[ 15.330004] CPU: 1 PID: 1075 Comm: gnome-shell Not tainted 4.5.0-rc6 #1
[ 15.332000] Hardware name: VMware, Inc. VMware Virtual Platform/440BX
Desktop Reference Platform, BIOS 6.00 07/02/2015
[ 15.335179] task: ffff880077394b00 ti: ffff8800773a8000 task.ti:
ffff8800773a8000
[ 15.337411] RIP: 0010:[<0000000000000000>] [<
(null)>] (null)
[ 15.339729] RSP: 0018:ffff8800773abc50 EFLAGS: 00010246
[ 15.341335] RAX: ffffffffa00ed640 RBX: ffff880036171000 RCX:
ffff880036173770
[ 15.343470] RDX: 0000000000002000 RSI: 0000000000002000 RDI:
ffff8800361734b8
[ 15.345605] RBP: ffff8800773abd18 R08: 0000000000000000 R09:
0000000000000000
[ 15.347798] R10: 0000000000000000 R11: 0000000000000000 R12:
ffff8800361734e0
[ 15.349929] R13: ffff880036171000 R14: ffff8800773abd60 R15:
00000000fffffffe
[ 15.352096] FS: 00007fb347faca80(0000) GS:ffff88007c640000(0000)
knlGS:0000000000000000
[ 15.354513] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 15.356230] CR2: 0000000000000000 CR3: 000000007739f000 CR4:
00000000001406e0
[ 15.358427] Stack:
[ 15.359092] ffffffffa0024535 ffff8800773abc68 ffffffff811196cd
ffff880036173764
[ 15.361477] ffff880036173770 0000000000000001 ffff880036171410
ffff880000000001
[ 15.364091] ffff880079f38000 0000000000000000 00000000812059bd
0000000000000000
[ 15.366488] Call Trace:
[ 15.367278] [<ffffffffa0024535>] ? drm_mode_getconnector+0x375/0x400
[drm]
[ 15.369515] [<ffffffff811196cd>] ? debug_lockdep_rcu_enabled+0x1d/0x20
[ 15.371537] [<ffffffffa0015c72>] drm_ioctl+0x152/0x560 [drm]
[ 15.373295] [<ffffffffa00241c0>] ? drm_mode_getcrtc+0x150/0x150 [drm]
[ 15.375268] [<ffffffffa00cf56d>] vmw_generic_ioctl+0x17d/0x280 [vmwgfx]
[ 15.377277] [<ffffffffa0015b20>] ? drm_getmap+0xe0/0xe0 [drm]
[ 15.379044] [<ffffffffa00cf6a5>] vmw_unlocked_ioctl+0x15/0x20 [vmwgfx]
[ 15.381043] [<ffffffff8126e5a2>] do_vfs_ioctl+0xa2/0x690
[ 15.382684] [<ffffffff8127acbf>] ? __fget+0x11f/0x200
[ 15.384249] [<ffffffff8127aba5>] ? __fget+0x5/0x200
[ 15.385760] [<ffffffff8126ec09>] SyS_ioctl+0x79/0x90
[ 15.387296] [<ffffffff8182daf2>] entry_SYSCALL_64_fastpath+0x12/0x76
[ 15.389246] Code: Bad RIP value.
[ 15.390375] RIP [< (null)>] (null)
[ 15.391992] RSP <ffff8800773abc50>
[ 15.393081] CR2: 0000000000000000
[ 15.394174] ---[ end trace f9f3f138ca13da13 ]---
On 02/29/2016 10:38 PM, Sebastian Herbszt wrote:
> Hello,
>
> I get a boot hang with vmwgfx on 4.5-rc6 (4.5.0-rc6-1.gb239884-default from
> openSUSE). This happens on VMware Player 5.0.2.
> Same VM works fine with kernel 4.4 but on 4.5-rc6 it hangs with
>
> [drm] Initialized vmwgfx 2.9.0 20150810 for 0000:00:0f.0 on minor 0
>
> I am able to boot the system with "nomodeset".
>
> Sebastian
> _______________________________________________
> dri-devel mailing list
> dri-devel@lists.freedesktop.org
> https://lists.freedesktop.org/mailman/listinfo/dri-devel
_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel
next prev parent reply other threads:[~2016-03-04 22:46 UTC|newest]
Thread overview: 5+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-02-29 21:38 boot hang with vmwgfx on 4.5-rc6 Sebastian Herbszt
2016-03-04 22:39 ` Thomas Hellstrom [this message]
2016-03-07 13:51 ` Thomas Hellstrom
2016-03-07 16:26 ` Thierry Reding
2016-03-07 22:33 ` Sebastian Herbszt
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=56DA0EBF.8070609@vmware.com \
--to=thellstrom@vmware.com \
--cc=dri-devel@lists.freedesktop.org \
--cc=herbszt@gmx.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).