From: hl <hl@rock-chips.com>
To: "Heiko Stübner" <heiko@sntech.de>, mturquette@baylibre.com
Cc: mark.yao@rock-chips.com, myungjoo.ham@samsung.com,
sboyd@codeaurora.org, linux-clk@vger.kernel.org,
linux-arm-kernel@lists.infradead.org,
linux-rockchip@lists.infradead.org, airlied@linux.ie,
dri-devel@lists.freedesktop.org, linux-kernel@vger.kernel.org,
kyungmin.park@samsung.com, dianders@chromium.org,
dbasehore@chromium.org, huangtao@rock-chips.com,
typ@rock-chips.com
Subject: Re: [RFC PATCH v1 1/6] rockchip: rockchip: add new clock-type for the ddrclk
Date: Mon, 6 Jun 2016 11:20:35 +0800 [thread overview]
Message-ID: <5754EC03.9000809@rock-chips.com> (raw)
In-Reply-To: <1663829.Hlc2xmNrOy@diego>
Hi Heiko,
On 2016年06月03日 20:51, Heiko Stübner wrote:
> Am Freitag, 3. Juni 2016, 17:55:14 schrieb Lin Huang:
>> On new rockchip platform(rk3399 etc), there have dcf controller to
>> do ddr frequency scaling, and this controller will implement in
>> arm-trust-firmware. We add a special clock-type to handle that.
>>
>> Signed-off-by: Lin Huang <hl@rock-chips.com>
>> ---
>> Changes in v1:
>> - None
>>
>> drivers/clk/rockchip/Makefile | 1 +
>> drivers/clk/rockchip/clk-ddr.c | 147
>> +++++++++++++++++++++++++++++++++++++++++ drivers/clk/rockchip/clk.c |
>> 9 +++
>> drivers/clk/rockchip/clk.h | 27 ++++++++
>> 4 files changed, 184 insertions(+)
>> create mode 100644 drivers/clk/rockchip/clk-ddr.c
>>
>> diff --git a/drivers/clk/rockchip/Makefile b/drivers/clk/rockchip/Makefile
>> index f47a2fa..b5f2c8e 100644
>> --- a/drivers/clk/rockchip/Makefile
>> +++ b/drivers/clk/rockchip/Makefile
>> @@ -8,6 +8,7 @@ obj-y += clk-pll.o
>> obj-y += clk-cpu.o
>> obj-y += clk-inverter.o
>> obj-y += clk-mmc-phase.o
>> +obj-y += clk-ddr.o
>> obj-$(CONFIG_RESET_CONTROLLER) += softrst.o
>>
>> obj-y += clk-rk3036.o
>> diff --git a/drivers/clk/rockchip/clk-ddr.c b/drivers/clk/rockchip/clk-ddr.c
>> new file mode 100644
>> index 0000000..5b6630d
>> --- /dev/null
>> +++ b/drivers/clk/rockchip/clk-ddr.c
>> @@ -0,0 +1,147 @@
>> +/*
>> + * Copyright (c) 2016 Rockchip Electronics Co. Ltd.
>> + * Author: Lin Huang <hl@rock-chips.com>
>> + *
>> + * This program is free software; you can redistribute it and/or modify
>> + * it under the terms of the GNU General Public License as published by
>> + * the Free Software Foundation; either version 2 of the License, or
>> + * (at your option) any later version.
>> + *
>> + * This program is distributed in the hope that it will be useful,
>> + * but WITHOUT ANY WARRANTY; without even the implied warranty of
>> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
>> + * GNU General Public License for more details.
>> + */
>> +
>> +#include <linux/of.h>
>> +#include <linux/slab.h>
>> +#include <linux/io.h>
>> +#include <linux/clk.h>
>> +#include <linux/clk-provider.h>
>> +#include "clk.h"
>> +
>> +struct rockchip_ddrclk {
>> + struct clk_hw hw;
>> + void __iomem *reg_base;
>> + int mux_offset;
>> + int mux_shift;
>> + int mux_width;
>> + int mux_flag;
>> + int div_shift;
>> + int div_width;
>> + int div_flag;
>> + spinlock_t *lock;
>> +};
>> +
>> +#define to_rockchip_ddrclk_hw(hw) container_of(hw, struct rockchip_ddrclk,
>> hw)
>> +#define val_mask(width) ((1 << (width)) - 1)
> maybe use GENMASK?
Oh, yes, we can use it. Will fix next version.
>
>> +
>> +static int rockchip_ddrclk_set_rate(struct clk_hw *hw, unsigned long drate,
>> + unsigned long prate)
>> +{
>> + struct rockchip_ddrclk *ddrclk = to_rockchip_ddrclk_hw(hw);
>> + unsigned long flags;
>> +
>> + spin_lock_irqsave(ddrclk->lock, flags);
>> +
>> + /* TODO: set ddr rate in bl31 */
> I expect this interface to be in existence and merged into the main ATF first.
>
> Right now the whole clock-type does nothing more than a simple COMPOSITE with
> added CLK_DIVIDER_READ_ONLY | CLK_MUX_READ_ONLY.
>
> Also Mike is propably still working in the so called coordinated rate change
> for clocks needing special handling on rate changes, which might provide a
> second approach to this.
You mean there is a patch set can handle it now? Can you tell me
the ID,
I want to check it.
>
> So please, first of all get the ATF-interface merged and meanwhile if you need
> to read the clock-rate, just use a regular composite, with the read-only flags.
>
My colleague are wroking on ATF code now, I agree with you, We can
not merge
this patch set before ATF-interface merged. And we do not need to
add a new code
if we only want to read ddr clock rate(we can get the ddr rate to
read dpll), so i prefer
to keep this function for now, and do review first, once the ATF
code ready, we can merge
soon it(i hope :-P ) .
>> + spin_unlock_irqrestore(ddrclk->lock, flags);
>> +
>> + return 0;
>> +}
>> +
>> +static unsigned long
>> +rockchip_ddrclk_recalc_rate(struct clk_hw *hw,
>> + unsigned long parent_rate)
>> +{
>> + struct rockchip_ddrclk *ddrclk = to_rockchip_ddrclk_hw(hw);
>> + int val;
>> +
>> + val = clk_readl(ddrclk->reg_base +
>> + ddrclk->mux_offset) >> ddrclk->div_shift;
>> + val &= val_mask(ddrclk->div_width);
>> +
>> + return DIV_ROUND_UP_ULL((u64)parent_rate, val + 1);
> return divider_recalc_rate(...)
got it , thank you.
>
>
> Heiko
>
>
>
--
Lin Huang
next prev parent reply other threads:[~2016-06-06 3:20 UTC|newest]
Thread overview: 22+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-06-03 9:55 [RFC PATCH v1 0/6] rk3399 support ddr frequency scaling Lin Huang
2016-06-03 9:55 ` [RFC PATCH v1 1/6] rockchip: rockchip: add new clock-type for the ddrclk Lin Huang
2016-06-03 12:29 ` Shawn Lin
2016-06-06 2:24 ` hl
2016-06-03 12:51 ` Heiko Stübner
2016-06-06 3:20 ` hl
2016-06-06 3:20 ` hl [this message]
2016-06-03 9:55 ` [RFC PATCH v1 2/6] clk: rockchip: rk3399: add SCLK_DDRCLK ID for ddrc Lin Huang
2016-06-03 12:34 ` Shawn Lin
2016-06-03 12:36 ` Heiko Stübner
2016-06-03 12:47 ` Shawn Lin
2016-06-03 13:25 ` Doug Anderson
2016-06-03 9:55 ` [RFC PATCH v1 3/6] clk: rockchip: rk3399: add ddrc clock support Lin Huang
2016-06-03 12:56 ` Heiko Stübner
2016-06-06 3:25 ` hl
2016-06-03 9:55 ` [RFC PATCH v1 4/6] PM / devfreq: event: support rockchip dfi controller Lin Huang
2016-06-03 10:26 ` Chanwoo Choi
2016-06-06 3:50 ` hl
[not found] ` <1464947719-6245-5-git-send-email-hl-TNX95d0MmH7DzftRWevZcw@public.gmane.org>
2016-06-03 16:54 ` Thierry Reding
2016-06-06 6:19 ` hl
2016-06-03 9:55 ` [RFC PATCH v1 5/6] PM / devfreq: rockchip: add devfreq driver for rk3399 dmc Lin Huang
2016-06-03 9:55 ` [RFC PATCH v1 6/6] drm/rockchip: Add dmc notifier in vop driver Lin Huang
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=5754EC03.9000809@rock-chips.com \
--to=hl@rock-chips.com \
--cc=airlied@linux.ie \
--cc=dbasehore@chromium.org \
--cc=dianders@chromium.org \
--cc=dri-devel@lists.freedesktop.org \
--cc=heiko@sntech.de \
--cc=huangtao@rock-chips.com \
--cc=kyungmin.park@samsung.com \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-clk@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-rockchip@lists.infradead.org \
--cc=mark.yao@rock-chips.com \
--cc=mturquette@baylibre.com \
--cc=myungjoo.ham@samsung.com \
--cc=sboyd@codeaurora.org \
--cc=typ@rock-chips.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).