From: Archit Taneja <architt@codeaurora.org>
To: Laurent Pinchart <laurent.pinchart@ideasonboard.com>,
dri-devel@lists.freedesktop.org
Cc: daniel.vetter@ffwll.ch
Subject: Re: [GIT PULL] drm bridge drivers for 4.8 (updated)
Date: Tue, 9 Aug 2016 00:00:07 +0530 [thread overview]
Message-ID: <57A8CFAF.3090001@codeaurora.org> (raw)
In-Reply-To: <4903056.FBHOtWANEr@avalon>
On 8/4/2016 1:36 AM, Laurent Pinchart wrote:
> Hi Archit,
>
> On Tuesday 19 Jul 2016 12:06:41 Archit Taneja wrote:
>> Hi Dave,
>>
>> This is an update to the previous drm bridge pull request. The ADV7511
>> driver's conversion from slave encoder to bridge meant that its users
>> (the rcar-du kms driver) should use the bridge interface too. This pull
>> request now also contains a commit that updates the rcar-du's hdmi encoder
>> interface from slave encoder to bridge.
>>
>> The other updates are as before:
>>
>> - Converts the ADV7511 i2c slave encoder driver to a bridge driver.
>> Adds support for the ADV7533 bridge chip.
>> - Add bridge driver for TC358767 (DSI/DPI to eDP) encoder chips.
>>
>> Thanks,
>> Archit
>>
>> The following changes since commit 2ae995887830b335f9bdab3040018071da54bcdb:
>>
>> drm: Fix a typo in drm_ioctl.c (2016-06-30 12:04:44 +0300)
>>
>> are available in the git repository at:
>>
>> https://github.com/boddob/linux.git drm_bridge_for_4.8
>>
>> for you to fetch changes up to 1d926114d8f4e9f138617b95c6cd377667c36369:
>>
>> drm: rcar-du: Remove i2c slave encoder interface for hdmi encoder
>> (2016-07-18 08:58:45 +0530)
>>
>> ----------------------------------------------------------------
>> Andrey Gusakov (1):
>> drm/bridge: tc358767: Add DPI to eDP bridge driver
>>
>> Archit Taneja (9):
>> drm/i2c: adv7511: Convert to drm_bridge
>> drm/i2c: adv7511: Move to bridge folder
>> drm/bridge: adv7511: Fix mutex deadlock when interrupts are disabled
>> drm/bridge: adv7533: Initial support for ADV7533
>> drm/bridge: adv7533: Create a MIPI DSI device
>> drm/bridge: adv7533: Use internal timing generator
>> drm/bridge: adv7533: Change number of DSI lanes dynamically
>> dt-bindings: drm/bridge: Update bindings for ADV7533
>> drm: rcar-du: Remove i2c slave encoder interface for hdmi encoder
>
> You've included the wrong version of that patch, it doesn't set encoder-
>> bridge, breaking HDMI output for rcar-du-drm :-(
>
> I'll send a fix shortly.
Sorry, was ooo. Thanks for fixing this.
Archit
>
>> Philipp Zabel (1):
>> dt-bindings: tc358767: add DT documentation
>>
>> .../bindings/display/bridge/adi,adv7511.txt | 26 +-
>> .../bindings/display/bridge/toshiba,tc358767.txt | 53 +
>> drivers/gpu/drm/bridge/Kconfig | 11 +
>> drivers/gpu/drm/bridge/Makefile | 2 +
>> drivers/gpu/drm/bridge/adv7511/Kconfig | 15 +
>> drivers/gpu/drm/bridge/adv7511/Makefile | 3 +
>> drivers/gpu/drm/{i2c => bridge/adv7511}/adv7511.h | 103 ++
>> .../adv7511.c => bridge/adv7511/adv7511_drv.c} | 324 +++--
>> drivers/gpu/drm/bridge/adv7511/adv7533.c | 265 ++++
>> drivers/gpu/drm/bridge/tc358767.c | 1413 +++++++++++++++++
>> drivers/gpu/drm/i2c/Kconfig | 6 -
>> drivers/gpu/drm/i2c/Makefile | 2 -
>> drivers/gpu/drm/rcar-du/Makefile | 4 +-
>> drivers/gpu/drm/rcar-du/rcar_du_encoder.c | 3 +-
>> drivers/gpu/drm/rcar-du/rcar_du_encoder.h | 7 +-
>> drivers/gpu/drm/rcar-du/rcar_du_hdmicon.c | 116 --
>> drivers/gpu/drm/rcar-du/rcar_du_hdmicon.h | 31 -
>> drivers/gpu/drm/rcar-du/rcar_du_hdmienc.c | 68 +-
>> 18 files changed, 2120 insertions(+), 332 deletions(-)
>> create mode 100644
>> Documentation/devicetree/bindings/display/bridge/toshiba,tc358767.txt
>> create mode 100644 drivers/gpu/drm/bridge/adv7511/Kconfig
>> create mode 100644 drivers/gpu/drm/bridge/adv7511/Makefile
>> rename drivers/gpu/drm/{i2c => bridge/adv7511}/adv7511.h (82%)
>> rename drivers/gpu/drm/{i2c/adv7511.c => bridge/adv7511/adv7511_drv.c}
>> (80%) create mode 100644 drivers/gpu/drm/bridge/adv7511/adv7533.c
>> create mode 100644 drivers/gpu/drm/bridge/tc358767.c
>> delete mode 100644 drivers/gpu/drm/rcar-du/rcar_du_hdmicon.c
>> delete mode 100644 drivers/gpu/drm/rcar-du/rcar_du_hdmicon.h
>
--
Qualcomm Innovation Center, Inc. is a member of Code Aurora Forum,
a Linux Foundation Collaborative Project
_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel
prev parent reply other threads:[~2016-08-08 18:30 UTC|newest]
Thread overview: 6+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-07-17 8:39 [GIT PULL] drm bridge drivers for 4.8 Archit Taneja
2016-07-17 8:53 ` Laurent Pinchart
2016-07-18 3:36 ` Archit Taneja
2016-07-19 6:36 ` [GIT PULL] drm bridge drivers for 4.8 (updated) Archit Taneja
2016-08-03 20:06 ` Laurent Pinchart
2016-08-08 18:30 ` Archit Taneja [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=57A8CFAF.3090001@codeaurora.org \
--to=architt@codeaurora.org \
--cc=daniel.vetter@ffwll.ch \
--cc=dri-devel@lists.freedesktop.org \
--cc=laurent.pinchart@ideasonboard.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).