From: Jason-JH Lin <jason-jh.lin@mediatek.com>
To: AngeloGioacchino Del Regno
<angelogioacchino.delregno@collabora.com>,
<chunkuang.hu@kernel.org>
Cc: devicetree@vger.kernel.org, jitao.shi@mediatek.com,
krzysztof.kozlowski@canonical.com, airlied@linux.ie,
alexandre.torgue@foss.st.com, dri-devel@lists.freedesktop.org,
linux-kernel@vger.kernel.org, robh+dt@kernel.org,
linux-mediatek@lists.infradead.org, mcoquelin.stm32@gmail.com,
matthias.bgg@gmail.com, linux-stm32@st-md-mailman.stormreply.com,
linux-arm-kernel@lists.infradead.org
Subject: Re: [PATCH 3/3] dt-bindings: display: mediatek: Fix examples on new bindings
Date: Wed, 9 Mar 2022 11:42:41 +0800 [thread overview]
Message-ID: <5cccaada06b76c0ce8e66abf1336cf565f4ccc0a.camel@mediatek.com> (raw)
In-Reply-To: <84e2bb5d7047fc1291d765131ce3f6b265a5304e.camel@mediatek.com>
Hi Angelo,
Would you like to let me resend this patch?
I will revert this patch to fix up the problem of mediatek,ethdr.yaml
needing to be rebased on [1][2]:
https://git.kernel.org/pub/scm/linux/kernel/git/chunkuang.hu/linux.git/commit/?h=mediatek-drm-next&id=e7dcfe64204a5cd9a74a9ca7d9c7a22434dc7fe5
Then Nancy will add mediatek,ethdr.yaml with your fix at the next
version of vdosys1 series:
https://patchwork.kernel.org/project/linux-mediatek/list/?series=621401
I will also fix up include header of mediatek,ovl-2l.yaml from mt8173
to mt8183.
Regards,
Jason-JH.Lin
On Sun, 2022-03-06 at 02:34 +0800, Jason-JH Lin wrote:
> Hi Angelo,
>
> Thank you very much for fixing them all.
> I really appreciate it :-)
>
> I tested these patches and found some small problem.
>
>
> On Fri, 2022-03-04 at 10:54 +0100, AngeloGioacchino Del Regno wrote:
> > To avoid failure of dt_binding_check perform a slight refactoring
> > of the examples: the main block is kept, but that required fixing
> > the address and size cells, plus the inclusion of missing dt-
> > bindings
> > headers, required to parse some of the values assigned to various
> > properties.
> >
> > Fixes: 4ed545e7d100 ("dt-bindings: display: mediatek: disp: split
> > each block to individual yaml")
> > Signed-off-by: AngeloGioacchino Del Regno <
> > angelogioacchino.delregno@collabora.com>
> > ---
> > .../display/mediatek/mediatek,aal.yaml | 24 +++--
> > .../display/mediatek/mediatek,ccorr.yaml | 23 +++--
> > .../display/mediatek/mediatek,color.yaml | 23 +++--
> > .../display/mediatek/mediatek,dither.yaml | 23 +++--
> > .../display/mediatek/mediatek,dpi.yaml | 3 +-
> > .../display/mediatek/mediatek,dsc.yaml | 23 +++--
> > .../display/mediatek/mediatek,ethdr.yaml | 99 ++++++++++-----
> > --
> > --
> > .../display/mediatek/mediatek,gamma.yaml | 23 +++--
> > .../display/mediatek/mediatek,merge.yaml | 49 +++++----
> > .../display/mediatek/mediatek,mutex.yaml | 25 +++--
> > .../display/mediatek/mediatek,od.yaml | 14 ++-
> > .../display/mediatek/mediatek,ovl-2l.yaml | 26 +++--
> > .../display/mediatek/mediatek,ovl.yaml | 26 +++--
> > .../display/mediatek/mediatek,postmask.yaml | 23 +++--
> > .../display/mediatek/mediatek,rdma.yaml | 28 ++++--
> > .../display/mediatek/mediatek,split.yaml | 17 +++-
> > .../display/mediatek/mediatek,ufoe.yaml | 19 ++--
> > .../display/mediatek/mediatek,wdma.yaml | 26 +++--
> > 18 files changed, 316 insertions(+), 178 deletions(-)
>
> [snip]
>
> > diff --git
> > a/Documentation/devicetree/bindings/display/mediatek/mediatek,ethdr
> > .y
> > aml
> > b/Documentation/devicetree/bindings/display/mediatek/mediatek,ethdr
> > .y
> > aml
> > index 131eed5eeeb7..e16deca0dc2b 100644
> > ---
> > a/Documentation/devicetree/bindings/display/mediatek/mediatek,ethdr
> > .y
> > aml
> > +++
> > b/Documentation/devicetree/bindings/display/mediatek/mediatek,ethdr
> > .y
> > aml
> > @@ -97,51 +97,62 @@ additionalProperties: false
> >
> > examples:
> > - |
> > + #include <dt-bindings/interrupt-controller/arm-gic.h>
> > + #include <dt-bindings/clock/mt8195-clk.h>
> > + #include <dt-bindings/gce/mt8195-gce.h>
> > + #include <dt-bindings/memory/mt8195-memory-port.h>
>
> This header file should base on [1].
> [1] dt-bindings: mediatek: mt8195: Add binding for MM IOMMU
>
>
https://patchwork.kernel.org/project/linux-mediatek/patch/20220217113453.13658-2-yong.wu@mediatek.com/
>
> > + #include <dt-bindings/power/mt8195-power.h>
> > + #include <dt-bindings/reset/mt8195-resets.h>
> >
> > - disp_ethdr@1c114000 {
> > - compatible = "mediatek,mt8195-disp-ethdr";
> > - reg = <0 0x1c114000 0 0x1000>,
> > - <0 0x1c115000 0 0x1000>,
> > - <0 0x1c117000 0 0x1000>,
> > - <0 0x1c119000 0 0x1000>,
> > - <0 0x1c11A000 0 0x1000>,
> > - <0 0x1c11B000 0 0x1000>,
> > - <0 0x1c11C000 0 0x1000>;
> > - reg-names = "mixer", "vdo_fe0", "vdo_fe1", "gfx_fe0",
> > "gfx_fe1",
> > - "vdo_be", "adl_ds";
> > - mediatek,gce-client-reg = <&gce0 SUBSYS_1c11XXXX
> > 0x4000
> > 0x1000>,
> > - <&gce0 SUBSYS_1c11XXXX
> > 0x5000
> > 0x1000>,
> > - <&gce0 SUBSYS_1c11XXXX
> > 0x7000
> > 0x1000>,
> > - <&gce0 SUBSYS_1c11XXXX
> > 0x9000
> > 0x1000>,
> > - <&gce0 SUBSYS_1c11XXXX
> > 0xA000
> > 0x1000>,
> > - <&gce0 SUBSYS_1c11XXXX
> > 0xB000
> > 0x1000>,
> > - <&gce0 SUBSYS_1c11XXXX
> > 0xC000
> > 0x1000>;
> > - clocks = <&vdosys1 CLK_VDO1_DISP_MIXER>,
> > - <&vdosys1 CLK_VDO1_HDR_VDO_FE0>,
> > - <&vdosys1 CLK_VDO1_HDR_VDO_FE1>,
> > - <&vdosys1 CLK_VDO1_HDR_GFX_FE0>,
> > - <&vdosys1 CLK_VDO1_HDR_GFX_FE1>,
> > - <&vdosys1 CLK_VDO1_HDR_VDO_BE>,
> > - <&vdosys1 CLK_VDO1_26M_SLOW>,
> > - <&vdosys1 CLK_VDO1_HDR_VDO_FE0_DL_ASYNC>,
> > - <&vdosys1 CLK_VDO1_HDR_VDO_FE1_DL_ASYNC>,
> > - <&vdosys1 CLK_VDO1_HDR_GFX_FE0_DL_ASYNC>,
> > - <&vdosys1 CLK_VDO1_HDR_GFX_FE1_DL_ASYNC>,
> > - <&vdosys1 CLK_VDO1_HDR_VDO_BE_DL_ASYNC>,
> > - <&topckgen CLK_TOP_ETHDR_SEL>;
> > - clock-names = "mixer", "vdo_fe0", "vdo_fe1",
> > "gfx_fe0",
> > "gfx_fe1",
> > - "vdo_be", "adl_ds", "vdo_fe0_async",
> > "vdo_fe1_async",
> > - "gfx_fe0_async",
> > "gfx_fe1_async","vdo_be_async",
> > - "ethdr_top";
> > - power-domains = <&spm MT8195_POWER_DOMAIN_VDOSYS1>;
> > - iommus = <&iommu_vpp M4U_PORT_L3_HDR_DS>,
> > - <&iommu_vpp M4U_PORT_L3_HDR_ADL>;
> > - interrupts = <GIC_SPI 517 IRQ_TYPE_LEVEL_HIGH 0>; /*
> > disp mixer */
> > - resets = <&vdosys1
> > MT8195_VDOSYS1_SW1_RST_B_HDR_VDO_FE0_DL_ASYNC>,
> > - <&vdosys1
> > MT8195_VDOSYS1_SW1_RST_B_HDR_VDO_FE1_DL_ASYNC>,
> > - <&vdosys1
> > MT8195_VDOSYS1_SW1_RST_B_HDR_GFX_FE0_DL_ASYNC>,
> > - <&vdosys1
> > MT8195_VDOSYS1_SW1_RST_B_HDR_GFX_FE1_DL_ASYNC>,
> > - <&vdosys1
> > MT8195_VDOSYS1_SW1_RST_B_HDR_VDO_BE_DL_ASYNC>;
> > + soc {
> > + #address-cells = <2>;
> > + #size-cells = <2>;
> > +
> > + disp_ethdr@1c114000 {
> > + compatible = "mediatek,mt8195-disp-ethdr";
> > + reg = <0 0x1c114000 0 0x1000>,
> > + <0 0x1c115000 0 0x1000>,
> > + <0 0x1c117000 0 0x1000>,
> > + <0 0x1c119000 0 0x1000>,
> > + <0 0x1c11A000 0 0x1000>,
> > + <0 0x1c11B000 0 0x1000>,
> > + <0 0x1c11C000 0 0x1000>;
> > + reg-names = "mixer", "vdo_fe0", "vdo_fe1",
> > "gfx_fe0", "gfx_fe1",
> > + "vdo_be", "adl_ds";
> > + mediatek,gce-client-reg = <&gce0 SUBSYS_1c11XXXX
> > 0x4000 0x1000>,
> > + <&gce0 SUBSYS_1c11XXXX
> > 0x5000 0x1000>,
> > + <&gce0 SUBSYS_1c11XXXX
> > 0x7000 0x1000>,
> > + <&gce0 SUBSYS_1c11XXXX
> > 0x9000 0x1000>,
> > + <&gce0 SUBSYS_1c11XXXX
> > 0xA000 0x1000>,
> > + <&gce0 SUBSYS_1c11XXXX
> > 0xB000 0x1000>,
> > + <&gce0 SUBSYS_1c11XXXX
> > 0xC000 0x1000>;
> > + clocks = <&vdosys1 CLK_VDO1_DISP_MIXER>,
> > + <&vdosys1 CLK_VDO1_HDR_VDO_FE0>,
> > + <&vdosys1 CLK_VDO1_HDR_VDO_FE1>,
> > + <&vdosys1 CLK_VDO1_HDR_GFX_FE0>,
> > + <&vdosys1 CLK_VDO1_HDR_GFX_FE1>,
> > + <&vdosys1 CLK_VDO1_HDR_VDO_BE>,
> > + <&vdosys1 CLK_VDO1_26M_SLOW>,
> > + <&vdosys1 CLK_VDO1_HDR_VDO_FE0_DL_ASYNC>,
> > + <&vdosys1 CLK_VDO1_HDR_VDO_FE1_DL_ASYNC>,
> > + <&vdosys1 CLK_VDO1_HDR_GFX_FE0_DL_ASYNC>,
> > + <&vdosys1 CLK_VDO1_HDR_GFX_FE1_DL_ASYNC>,
> > + <&vdosys1 CLK_VDO1_HDR_VDO_BE_DL_ASYNC>,
> > + <&topckgen CLK_TOP_ETHDR>;
> > + clock-names = "mixer", "vdo_fe0", "vdo_fe1",
> > "gfx_fe0", "gfx_fe1",
> > + "vdo_be", "adl_ds", "vdo_fe0_async",
> > "vdo_fe1_async",
> > + "gfx_fe0_async",
> > "gfx_fe1_async","vdo_be_async",
> > + "ethdr_top";
> > + power-domains = <&spm
> > MT8195_POWER_DOMAIN_VDOSYS1>;
> > + iommus = <&iommu_vpp M4U_PORT_L3_HDR_DS>,
> > + <&iommu_vpp M4U_PORT_L3_HDR_ADL>;
> > + interrupts = <GIC_SPI 517 IRQ_TYPE_LEVEL_HIGH 0>;
> > /*
> > disp mixer */
> > + resets = <&vdosys1
> > MT8195_VDOSYS1_SW1_RST_B_HDR_VDO_FE0_DL_ASYNC>,
> > + <&vdosys1
> > MT8195_VDOSYS1_SW1_RST_B_HDR_VDO_FE1_DL_ASYNC>,
> > + <&vdosys1
> > MT8195_VDOSYS1_SW1_RST_B_HDR_GFX_FE0_DL_ASYNC>,
> > + <&vdosys1
> > MT8195_VDOSYS1_SW1_RST_B_HDR_GFX_FE1_DL_ASYNC>,
> > + <&vdosys1
> > MT8195_VDOSYS1_SW1_RST_B_HDR_VDO_BE_DL_ASYNC>;
>
> These define should base on [2].
> [2] dt-bindings: reset: mt8195: add vdosys1 reset control bit
>
>
https://patchwork.kernel.org/project/linux-mediatek/patch/20220222100741.30138-5-nancy.lin@mediatek.com/
>
> + };
> > };
> >
>
> [snip]
>
> > diff --git
> > a/Documentation/devicetree/bindings/display/mediatek/mediatek,ovl-
> > 2l.yaml
> > b/Documentation/devicetree/bindings/display/mediatek/mediatek,ovl-
> > 2l.yaml
> > index e3cef99d0f98..25d2ac2a4f05 100644
> > ---
> > a/Documentation/devicetree/bindings/display/mediatek/mediatek,ovl-
> > 2l.yaml
> > +++
> > b/Documentation/devicetree/bindings/display/mediatek/mediatek,ovl-
> > 2l.yaml
> > @@ -66,13 +66,23 @@ additionalProperties: false
> >
> > examples:
> > - |
> > + #include <dt-bindings/interrupt-controller/arm-gic.h>
> > + #include <dt-bindings/clock/mt8173-clk.h>
> > + #include <dt-bindings/power/mt8173-power.h>
> > + #include <dt-bindings/gce/mt8173-gce.h>
> > + #include <dt-bindings/memory/mt8173-larb-port.h>
>
> These should be mt8183 header files.
>
> #include <dt-bindings/clock/mt8183-clk.h>
> #include <dt-bindings/power/mt8183-power.h>
> #include <dt-bindings/gce/mt8183-gce.h>
> #include <dt-bindings/memory/mt8183-larb-port.h>
>
> > - ovl_2l0: ovl@14009000 {
> > - compatible = "mediatek,mt8183-disp-ovl-2l";
> > - reg = <0 0x14009000 0 0x1000>;
> > - interrupts = <GIC_SPI 226 IRQ_TYPE_LEVEL_LOW>;
> > - power-domains = <&spm MT8183_POWER_DOMAIN_DISP>;
> > - clocks = <&mmsys CLK_MM_DISP_OVL0_2L>;
> > - iommus = <&iommu M4U_PORT_DISP_2L_OVL0_LARB0>;
> > - mediatek,gce-client-reg = <&gce SUBSYS_1400XXXX 0x9000
> > 0x1000>;
> > + soc {
> > + #address-cells = <2>;
> > + #size-cells = <2>;
> > +
> > + ovl_2l0: ovl@14009000 {
> > + compatible = "mediatek,mt8183-disp-ovl-2l";
> > + reg = <0 0x14009000 0 0x1000>;
> > + interrupts = <GIC_SPI 226 IRQ_TYPE_LEVEL_LOW>;
> > + power-domains = <&spm MT8183_POWER_DOMAIN_DISP>;
> > + clocks = <&mmsys CLK_MM_DISP_OVL0_2L>;
> > + iommus = <&iommu M4U_PORT_DISP_2L_OVL0_LARB0>;
> > + mediatek,gce-client-reg = <&gce SUBSYS_1400XXXX 0x9000
> > 0x1000>;
> > + };
> > };
>
> [snip]
>
> Thanks again!
> Tested-by: Jason-JH.Lin <jason-jh.lin@medaitek.com>
>
> Regards,
> Jason-JH.Lin
>
--
Jason-JH Lin <jason-jh.lin@mediatek.com>
next prev parent reply other threads:[~2022-03-09 3:42 UTC|newest]
Thread overview: 14+ messages / expand[flat|nested] mbox.gz Atom feed top
2022-03-04 9:54 [PATCH 0/3] Fix MediaTek display dt-bindings issues AngeloGioacchino Del Regno
2022-03-04 9:54 ` [PATCH 1/3] dt-bindings: display: mediatek, mutex: Fix mediatek, gce-events type AngeloGioacchino Del Regno
2022-03-04 15:37 ` [PATCH 1/3] dt-bindings: display: mediatek,mutex: Fix mediatek,gce-events type Rob Herring
2022-03-04 23:43 ` [PATCH 1/3] dt-bindings: display: mediatek, mutex: Fix mediatek, gce-events type Chun-Kuang Hu
2022-03-04 9:54 ` [PATCH 2/3] dt-bindings: display: mediatek, ovl: Fix 'iommu' required property typo AngeloGioacchino Del Regno
2022-03-04 15:37 ` [PATCH 2/3] dt-bindings: display: mediatek,ovl: " Rob Herring
2022-03-04 23:45 ` Chun-Kuang Hu
2022-03-04 9:54 ` [PATCH 3/3] dt-bindings: display: mediatek: Fix examples on new bindings AngeloGioacchino Del Regno
2022-03-04 15:39 ` Rob Herring
2022-03-04 23:47 ` Chun-Kuang Hu
2022-03-05 18:34 ` Jason-JH Lin
2022-03-09 3:42 ` Jason-JH Lin [this message]
2022-03-04 23:49 ` [PATCH 0/3] Fix MediaTek display dt-bindings issues Chun-Kuang Hu
2022-03-08 16:13 ` Rob Herring
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=5cccaada06b76c0ce8e66abf1336cf565f4ccc0a.camel@mediatek.com \
--to=jason-jh.lin@mediatek.com \
--cc=airlied@linux.ie \
--cc=alexandre.torgue@foss.st.com \
--cc=angelogioacchino.delregno@collabora.com \
--cc=chunkuang.hu@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=dri-devel@lists.freedesktop.org \
--cc=jitao.shi@mediatek.com \
--cc=krzysztof.kozlowski@canonical.com \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-mediatek@lists.infradead.org \
--cc=linux-stm32@st-md-mailman.stormreply.com \
--cc=matthias.bgg@gmail.com \
--cc=mcoquelin.stm32@gmail.com \
--cc=robh+dt@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox