From: Stefan Agner <stefan@agner.ch>
To: Robert Chiras <robert.chiras@nxp.com>
Cc: Marek Vasut <marex@denx.de>,
kernel@pengutronix.de, Anson Huang <anson.huang@nxp.com>,
David Airlie <airlied@linux.ie>,
Daniel Vetter <daniel.vetter@ffwll.ch>,
linux-kernel@vger.kernel.org, dri-devel@lists.freedesktop.org,
dl-linux-imx <linux-imx@nxp.com>,
Fabio Estevam <fabio.estevam@nxp.com>,
Shawn Guo <shawnguo@kernel.org>
Subject: Re: [PATCH 09/10] drm/mxsfb: Improve the axi clock usage
Date: Wed, 09 Jan 2019 18:09:53 +0100 [thread overview]
Message-ID: <6265abab29249f3a7a6758870c9b31ff@agner.ch> (raw)
In-Reply-To: <1547043209-8283-10-git-send-email-robert.chiras@nxp.com>
On 09.01.2019 15:13, Robert Chiras wrote:
> Currently, the enable of the axi clock return status is ignored, causing
> issues when the enable fails then we try to disable it. Therefore, it is
> better to check the return status and disable it only when enable
> succeeded.
> Also, remove the helper functions around clk_axi, since we can directly
> use the clk API function for enable/disable the clock. Those functions
> are already checking for NULL clk and returning 0 if that's the case.
Can we maybe even use the runtime PM system for that (adding two
callbacks for SET_RUNTIME_PM_OPS)?
I suggested it a while ago, but did not looked deeper into it:
https://lkml.org/lkml/2018/8/1/300
Since we basically enable on mxsfb_crtc_enable and disable on
mxsfb_crtc_disable, I think it would be pretty much the same thing.
--
Stefan
>
> Signed-off-by: Robert Chiras <robert.chiras@nxp.com>
> Acked-by: Leonard Crestez <leonard.crestez@nxp.com>
> ---
> drivers/gpu/drm/mxsfb/mxsfb_crtc.c | 8 ++++----
> drivers/gpu/drm/mxsfb/mxsfb_drv.c | 32 +++++++++++++-------------------
> drivers/gpu/drm/mxsfb/mxsfb_drv.h | 3 ---
> 3 files changed, 17 insertions(+), 26 deletions(-)
>
> diff --git a/drivers/gpu/drm/mxsfb/mxsfb_crtc.c
> b/drivers/gpu/drm/mxsfb/mxsfb_crtc.c
> index 8d1b6a6..b9437c7 100644
> --- a/drivers/gpu/drm/mxsfb/mxsfb_crtc.c
> +++ b/drivers/gpu/drm/mxsfb/mxsfb_crtc.c
> @@ -411,7 +411,7 @@ void mxsfb_crtc_enable(struct mxsfb_drm_private *mxsfb)
> {
> dma_addr_t paddr;
>
> - mxsfb_enable_axi_clk(mxsfb);
> + clk_prepare_enable(mxsfb->clk_axi);
> writel(0, mxsfb->base + LCDC_CTRL);
> mxsfb_crtc_mode_set_nofb(mxsfb);
>
> @@ -428,7 +428,7 @@ void mxsfb_crtc_enable(struct mxsfb_drm_private *mxsfb)
> void mxsfb_crtc_disable(struct mxsfb_drm_private *mxsfb)
> {
> mxsfb_disable_controller(mxsfb);
> - mxsfb_disable_axi_clk(mxsfb);
> + clk_disable_unprepare(mxsfb->clk_axi);
> }
>
> void mxsfb_plane_atomic_update(struct mxsfb_drm_private *mxsfb,
> @@ -456,9 +456,9 @@ void mxsfb_plane_atomic_update(struct
> mxsfb_drm_private *mxsfb,
>
> paddr = mxsfb_get_fb_paddr(mxsfb);
> if (paddr) {
> - mxsfb_enable_axi_clk(mxsfb);
> + clk_prepare_enable(mxsfb->clk_axi);
> writel(paddr, mxsfb->base + mxsfb->devdata->next_buf);
> - mxsfb_disable_axi_clk(mxsfb);
> + clk_disable_unprepare(mxsfb->clk_axi);
> }
>
> if (!fb || !old_fb)
> diff --git a/drivers/gpu/drm/mxsfb/mxsfb_drv.c
> b/drivers/gpu/drm/mxsfb/mxsfb_drv.c
> index 135b8e1..5e18353 100644
> --- a/drivers/gpu/drm/mxsfb/mxsfb_drv.c
> +++ b/drivers/gpu/drm/mxsfb/mxsfb_drv.c
> @@ -103,18 +103,6 @@ drm_pipe_to_mxsfb_drm_private(struct
> drm_simple_display_pipe *pipe)
> return container_of(pipe, struct mxsfb_drm_private, pipe);
> }
>
> -void mxsfb_enable_axi_clk(struct mxsfb_drm_private *mxsfb)
> -{
> - if (mxsfb->clk_axi)
> - clk_prepare_enable(mxsfb->clk_axi);
> -}
> -
> -void mxsfb_disable_axi_clk(struct mxsfb_drm_private *mxsfb)
> -{
> - if (mxsfb->clk_axi)
> - clk_disable_unprepare(mxsfb->clk_axi);
> -}
> -
> /**
> * mxsfb_atomic_helper_check - validate state object
> * @dev: DRM device
> @@ -237,25 +225,31 @@ static void mxsfb_pipe_update(struct
> drm_simple_display_pipe *pipe,
> static int mxsfb_pipe_enable_vblank(struct drm_simple_display_pipe *pipe)
> {
> struct mxsfb_drm_private *mxsfb = drm_pipe_to_mxsfb_drm_private(pipe);
> + int ret = 0;
> +
> + ret = clk_prepare_enable(mxsfb->clk_axi);
> + if (ret)
> + return ret;
>
> /* Clear and enable VBLANK IRQ */
> - mxsfb_enable_axi_clk(mxsfb);
> writel(CTRL1_CUR_FRAME_DONE_IRQ, mxsfb->base + LCDC_CTRL1 + REG_CLR);
> writel(CTRL1_CUR_FRAME_DONE_IRQ_EN, mxsfb->base + LCDC_CTRL1 + REG_SET);
> - mxsfb_disable_axi_clk(mxsfb);
> + clk_disable_unprepare(mxsfb->clk_axi);
>
> - return 0;
> + return ret;
> }
>
> static void mxsfb_pipe_disable_vblank(struct drm_simple_display_pipe *pipe)
> {
> struct mxsfb_drm_private *mxsfb = drm_pipe_to_mxsfb_drm_private(pipe);
>
> + if (clk_prepare_enable(mxsfb->clk_axi))
> + return;
> +
> /* Disable and clear VBLANK IRQ */
> - mxsfb_enable_axi_clk(mxsfb);
> writel(CTRL1_CUR_FRAME_DONE_IRQ_EN, mxsfb->base + LCDC_CTRL1 + REG_CLR);
> writel(CTRL1_CUR_FRAME_DONE_IRQ, mxsfb->base + LCDC_CTRL1 + REG_CLR);
> - mxsfb_disable_axi_clk(mxsfb);
> + clk_disable_unprepare(mxsfb->clk_axi);
> }
>
> static struct drm_simple_display_pipe_funcs mxsfb_funcs = {
> @@ -440,7 +434,7 @@ static irqreturn_t mxsfb_irq_handler(int irq, void *data)
> struct mxsfb_drm_private *mxsfb = drm->dev_private;
> u32 reg;
>
> - mxsfb_enable_axi_clk(mxsfb);
> + clk_prepare_enable(mxsfb->clk_axi);
>
> reg = readl(mxsfb->base + LCDC_CTRL1);
>
> @@ -449,7 +443,7 @@ static irqreturn_t mxsfb_irq_handler(int irq, void *data)
>
> writel(CTRL1_CUR_FRAME_DONE_IRQ, mxsfb->base + LCDC_CTRL1 + REG_CLR);
>
> - mxsfb_disable_axi_clk(mxsfb);
> + clk_disable_unprepare(mxsfb->clk_axi);
>
> return IRQ_HANDLED;
> }
> diff --git a/drivers/gpu/drm/mxsfb/mxsfb_drv.h
> b/drivers/gpu/drm/mxsfb/mxsfb_drv.h
> index c15b4f9..ce98411 100644
> --- a/drivers/gpu/drm/mxsfb/mxsfb_drv.h
> +++ b/drivers/gpu/drm/mxsfb/mxsfb_drv.h
> @@ -47,9 +47,6 @@ struct mxsfb_drm_private {
> int mxsfb_setup_crtc(struct drm_device *dev);
> int mxsfb_create_output(struct drm_device *dev);
>
> -void mxsfb_enable_axi_clk(struct mxsfb_drm_private *mxsfb);
> -void mxsfb_disable_axi_clk(struct mxsfb_drm_private *mxsfb);
> -
> void mxsfb_crtc_enable(struct mxsfb_drm_private *mxsfb);
> void mxsfb_crtc_disable(struct mxsfb_drm_private *mxsfb);
> void mxsfb_plane_atomic_update(struct mxsfb_drm_private *mxsfb,
_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel
next prev parent reply other threads:[~2019-01-09 17:09 UTC|newest]
Thread overview: 16+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-01-09 14:13 [PATCH 00/10] Add support for DRM bridge and additional pixel formats Robert Chiras
2019-01-09 14:13 ` [PATCH 01/10] drm/mxsfb: Update mxsfb to support a bridge Robert Chiras
2019-01-09 14:13 ` [PATCH 02/10] dt-bindings: display: Add max-res property for mxsfb Robert Chiras
2019-01-09 14:13 ` [PATCH 03/10] drm/mxsfb: Add max-res property for MXSFB Robert Chiras
2019-01-09 14:13 ` [PATCH 04/10] drm/mxsfb: Update mxsfb with additional pixel formats Robert Chiras
2019-01-14 16:38 ` Guido Günther
2019-01-09 14:13 ` [PATCH 05/10] drm/mxsfb: Fix the vblank events Robert Chiras
2019-01-09 14:13 ` [PATCH 06/10] drm/mxsfb: Add support for new pixel formats in eLCDIF Robert Chiras
2019-01-09 14:13 ` [PATCH 07/10] drm/mxsfb: Signal mode changed when bpp changed Robert Chiras
2019-01-14 16:37 ` Guido Günther
2019-01-09 14:13 ` [PATCH 08/10] drm/mxsfb: Update mxsfb to support LCD reset Robert Chiras
2019-01-10 21:19 ` Fabio Estevam
2019-01-09 14:13 ` [PATCH 09/10] drm/mxsfb: Improve the axi clock usage Robert Chiras
2019-01-09 17:09 ` Stefan Agner [this message]
2019-01-15 9:53 ` Robert Chiras
2019-01-09 14:13 ` [PATCH 10/10] drm/mxsfb: Clear OUTSTANDING_REQS bits Robert Chiras
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=6265abab29249f3a7a6758870c9b31ff@agner.ch \
--to=stefan@agner.ch \
--cc=airlied@linux.ie \
--cc=anson.huang@nxp.com \
--cc=daniel.vetter@ffwll.ch \
--cc=dri-devel@lists.freedesktop.org \
--cc=fabio.estevam@nxp.com \
--cc=kernel@pengutronix.de \
--cc=linux-imx@nxp.com \
--cc=linux-kernel@vger.kernel.org \
--cc=marex@denx.de \
--cc=robert.chiras@nxp.com \
--cc=shawnguo@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox