From: "Almahallawy, Khaled" <khaled.almahallawy@intel.com>
To: "Navare, Manasi D" <manasi.d.navare@intel.com>
Cc: "intel-gfx@lists.freedesktop.org"
<intel-gfx@lists.freedesktop.org>,
"Manna, Animesh" <animesh.manna@intel.com>,
"dri-devel@lists.freedesktop.org"
<dri-devel@lists.freedesktop.org>
Subject: Re: [PATCH 2/2] drm/i915/dp: TPS4 PHY test pattern compliance support
Date: Tue, 21 Jul 2020 00:20:57 +0000 [thread overview]
Message-ID: <6b2cedf4b501199697d592c0cd1083326dd647f5.camel@intel.com> (raw)
In-Reply-To: <20200721001149.GB14395@intel.com>
On Mon, 2020-07-20 at 17:11 -0700, Manasi Navare wrote:
> On Mon, Jul 20, 2020 at 04:41:26PM -0700, Khaled Almahallawy wrote:
> > Adding support for TPS4 (CP2520 Pattern 3) PHY pattern source
> > tests.
> >
> > Signed-off-by: Khaled Almahallawy <khaled.almahallawy@intel.com>
> > ---
> > drivers/gpu/drm/i915/display/intel_dp.c | 14 ++++++++++++--
> > drivers/gpu/drm/i915/i915_reg.h | 4 ++++
> > 2 files changed, 16 insertions(+), 2 deletions(-)
> >
> > diff --git a/drivers/gpu/drm/i915/display/intel_dp.c
> > b/drivers/gpu/drm/i915/display/intel_dp.c
> > index d6295eb20b63..effadc096740 100644
> > --- a/drivers/gpu/drm/i915/display/intel_dp.c
> > +++ b/drivers/gpu/drm/i915/display/intel_dp.c
> > @@ -5371,7 +5371,7 @@ static void
> > intel_dp_phy_pattern_update(struct intel_dp *intel_dp)
> > &intel_dp->compliance.test_data.phytest;
> > struct intel_crtc *crtc = to_intel_crtc(dig_port-
> > >base.base.crtc);
> > enum pipe pipe = crtc->pipe;
> > - u32 pattern_val;
> > + u32 pattern_val, dp_tp_ctl;
> >
> > switch (data->phy_pattern) {
> > case DP_PHY_TEST_PATTERN_NONE:
> > @@ -5411,7 +5411,7 @@ static void
> > intel_dp_phy_pattern_update(struct intel_dp *intel_dp)
> > DDI_DP_COMP_CTL_ENABLE |
> > DDI_DP_COMP_CTL_CUSTOM80);
> > break;
> > - case DP_PHY_TEST_PATTERN_CP2520:
> > + case DP_PHY_TEST_PATTERN_CP2520_PAT1:
> > /*
> > * FIXME: Ideally pattern should come from DPCD 0x24A.
> > As
> > * current firmware of DPR-100 could not set it, so
> > hardcoding
> > @@ -5423,6 +5423,16 @@ static void
> > intel_dp_phy_pattern_update(struct intel_dp *intel_dp)
> > DDI_DP_COMP_CTL_ENABLE |
> > DDI_DP_COMP_CTL_HBR2 |
> > pattern_val);
> > break;
> > + case DP_PHY_TEST_PATTERN_CP2520_PAT3:
> > + DRM_DEBUG_KMS("Set TPS4 Phy Test Pattern\n");
> > + intel_de_write(dev_priv, DDI_DP_COMP_CTL(pipe),
> > 0x0);
> > + dp_tp_ctl = intel_de_read(dev_priv,
> > TGL_DP_TP_CTL(pipe));
> > + dp_tp_ctl &= ~DP_TP_CTL_TRAIN_PAT4_SEL_MASK;
> > + dp_tp_ctl |= DP_TP_CTL_TRAIN_PAT4_SEL_TS4a;
> > + dp_tp_ctl &= ~DP_TP_CTL_LINK_TRAIN_MASK;
> > + dp_tp_ctl |= DP_TP_CTL_LINK_TRAIN_PAT4;
> > + intel_de_write(dev_priv, TGL_DP_TP_CTL(pipe),
> > dp_tp_ctl);
> > + break;
> > default:
> > WARN(1, "Invalid Phy Test Pattern\n");
> > }
> > diff --git a/drivers/gpu/drm/i915/i915_reg.h
> > b/drivers/gpu/drm/i915/i915_reg.h
> > index a0d31f3bf634..a4607bd1ac26 100644
> > --- a/drivers/gpu/drm/i915/i915_reg.h
> > +++ b/drivers/gpu/drm/i915/i915_reg.h
> > @@ -9982,6 +9982,10 @@ enum skl_power_gate {
> > #define DP_TP_CTL_MODE_SST (0 << 27)
> > #define DP_TP_CTL_MODE_MST (1 << 27)
> > #define DP_TP_CTL_FORCE_ACT (1 << 25)
> > +#define DP_TP_CTL_TRAIN_PAT4_SEL_MASK (3 << 19)
> > +#define DP_TP_CTL_TRAIN_PAT4_SEL_TS4a (0 << 19)
> > +#define DP_TP_CTL_TRAIN_PAT4_SEL_TP4b (1 << 19)
> > +#define DP_TP_CTL_TRAIN_PAT4_SEL_TP4c (2 << 19)
>
> The bspec calls them Training Pattern 4a/b/c, why is it _TS4a. TP4b,
> TP4c?
> We shd make it uniform, all TP4a/b/c perhaps?
Apology,will fix to TP4a/b/c then
>
> Manasi
>
> > #define DP_TP_CTL_ENHANCED_FRAME_ENABLE (1 << 18)
> > #define DP_TP_CTL_FDI_AUTOTRAIN (1 << 15)
> > #define DP_TP_CTL_LINK_TRAIN_MASK (7 << 8)
> > --
> > 2.17.1
> >
_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel
next prev parent reply other threads:[~2020-07-21 0:21 UTC|newest]
Thread overview: 7+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-07-20 23:41 [PATCH 1/2] drm/dp: Add PHY_TEST_PATTERN CP2520 Pattern 2 and 3 Khaled Almahallawy
2020-07-20 23:41 ` [PATCH 2/2] drm/i915/dp: TPS4 PHY test pattern compliance support Khaled Almahallawy
2020-07-21 0:11 ` Manasi Navare
2020-07-21 0:20 ` Almahallawy, Khaled [this message]
2020-07-21 0:07 ` [PATCH 1/2] drm/dp: Add PHY_TEST_PATTERN CP2520 Pattern 2 and 3 Manasi Navare
2020-07-21 0:40 ` Almahallawy, Khaled
2020-07-21 18:56 ` Manasi Navare
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=6b2cedf4b501199697d592c0cd1083326dd647f5.camel@intel.com \
--to=khaled.almahallawy@intel.com \
--cc=animesh.manna@intel.com \
--cc=dri-devel@lists.freedesktop.org \
--cc=intel-gfx@lists.freedesktop.org \
--cc=manasi.d.navare@intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).