Re: [PATCH 00/22] R-Car Gen3 HDMI output support

[Jose Abreu <Jose.Abreu@synopsys.com>]

Hi Laurent,


On 01-12-2016 23:43, Laurent Pinchart wrote:
> Hello,
>
> This patch series implements support for the HDMI output on Renesas R-Car Gen3
> SoCs, and more specifically on the R-Car H3.
>
> R-Car Gen3 SoCs include one or multiple Synopsys DWC HDMI TX controllers. The
> series thus starts with 13 cleanup or feature patches for the dw-hdmi driver.
> Patches 01/22 to 05/22 are small miscellaneous cleanups. Patch 06/22 fixes a
> crash when the HPD interrupt is generated before the bridge gets attached to a
> DRM device.
>
> Patch 07/22 then starts refactoring the API towards platform glue by moving
> common I/O and clock resource allocation to common code. Patches 08/22 and
> 09/22 continue by moving connector creation to the bridge attach operation to
> comply with the DRM bridge API. Patch 10/22 implements a new API for platform
> glue to register the bridge with the DRM core, for platform that doesn't use
> the component framework. Patches 11/22 to 13/22 finally abstract PHY setup to
> allow platforms to implement configuration for custom PHYs.
>
> The next three patches add glue code for the DWC HDMI on Renesas R-Car Gen3
> platforms. Patch 14/22 rework the DWC HDMI DT bindings to make them more
> modular, and patch 15/22 makes use of them to document the R-Car Gen DWC HDMI
> TX DT bindings. Patch 16/22 then implements the platform glue code.
>
> The next three patches implement support for the R8A7795 HDMI outputs in the
> R-Car DU driver. Patch 17/22 fixes a bug that makes the driver defer probe
> forever if an encoder is disabled. Patch 18/22 implement DPLL support to
> generate more precise clocks required by the HDMI controller, and patch 19/22
> then enables the two HDMI output on the R-Car H3 SoC.
>
> The last three patches enable the HDMI outputs on the H3 Salvator-X board by
> adding the HDMI encoders to the R-Car H3 DT (20/22), adding HDMI connectors
> and enabling the encoders (21/22) and adding the external dot clocks (22/22).
>
> The code has been tested on a Renesas Salvator-X H3 board, and modifications
> to the dw-hdmi Freescale and Rockchip platform glues have been compile-tested.
>
> More improvements to the dw-hdmi driver would be beneficial. The PHY
> modularization is based on the limited understanding of the HDMI PHYs used on
> the three supported platforms and will possibly be enhanced later when adding
> support for more platforms. The DT bindings would also benefit from a
> standardized definition of the ports, and the reg-io-width property could
> possibly be deprecated in favour of encoding the information in platform glue
> code. The patch series is however big enough as is to be submitted for review
> and merge before the dw-hdmi driver achieves perfection.
>
> Kieran Bingham (4):
>   drm: bridge: dw-hdmi: Remove unused function parameter
>   drm: bridge: dw-hdmi: Refactor hdmi_phy_configure resolution parameter
>   drm: bridge: dw-hdmi: Abstract the platform PHY configuration
>   drm: bridge: dw-hdmi: Replace device type with platform quirks
>
> Koji Matsuoka (4):
>   drm: rcar-du: Add Gen3 HDMI encoder support
>   drm: rcar-du: Add DPLL support
>   drm: rcar-du: Add HDMI outputs to R8A7795 device description
>   arm64: dts: r8a7795: salvator-x: Enable HDMI outputs
>
> Laurent Pinchart (13):
>   drm: bridge: dw-hdmi: Merge __hdmi_phy_i2c_write and
>     hdmi_phy_i2c_write
>   drm: bridge: dw-hdmi: Remove unneeded arguments to bind/unbind
>     functions
>   drm: bridge: dw-hdmi: Embed drm_bridge in struct dw_hdmi
>   drm: bridge: dw-hdmi: Remove encoder field from struct dw_hdmi
>   drm: bridge: dw-hdmi: Don't forward HPD events to DRM core before
>     attach
>   drm: bridge: dw-hdmi: Move IRQ and IO resource allocation to common
>     code
>   drm: bridge: dw-hdmi: Reorder functions to prepare for next commit
>   drm: bridge: dw-hdmi: Create connector in the bridge attach operation
>   drm: bridge: dw-hdmi: Implement DRM bridge registration
>   dt-bindings: display: dw-hdmi: Clean up DT bindings documentation
>   dt-bindings: display: renesas: Add R-Car Gen3 HDMI TX DT bindings
>   drm: rcar-du: Skip disabled outputs
>   arm64: dts: r8a7795: salvator-x: Add DU1 and DU2 external dot clocks
>
> Ulrich Hecht (1):
>   arm64: dts: r8a7795: Add HDMI encoder support
>
>  .../devicetree/bindings/display/bridge/dw_hdmi.txt |  85 ++---
>  .../bindings/display/bridge/renesas,dw-hdmi.txt    |  75 +++++
>  .../devicetree/bindings/display/imx/hdmi.txt       |  51 +--
>  .../bindings/display/rockchip/dw_hdmi-rockchip.txt |  43 ++-
>  MAINTAINERS                                        |   1 +
>  arch/arm64/boot/dts/renesas/r8a7795-salvator-x.dts |  73 +++++
>  arch/arm64/boot/dts/renesas/r8a7795.dtsi           |  50 +++
>  drivers/gpu/drm/bridge/dw-hdmi.c                   | 364 ++++++++++++---------
>  drivers/gpu/drm/bridge/dw-hdmi.h                   |   4 +-
>  drivers/gpu/drm/imx/dw_hdmi-imx.c                  |  19 +-
>  drivers/gpu/drm/rcar-du/Kconfig                    |   8 +
>  drivers/gpu/drm/rcar-du/Makefile                   |   1 +
>  drivers/gpu/drm/rcar-du/rcar_du_crtc.c             |  81 ++++-
>  drivers/gpu/drm/rcar-du/rcar_du_crtc.h             |   4 +-
>  drivers/gpu/drm/rcar-du/rcar_du_drv.c              |  13 +-
>  drivers/gpu/drm/rcar-du/rcar_du_drv.h              |   1 +
>  drivers/gpu/drm/rcar-du/rcar_du_kms.c              |   7 +
>  drivers/gpu/drm/rcar-du/rcar_du_regs.h             |  23 ++
>  drivers/gpu/drm/rcar-du/rcar_dw_hdmi.c             | 105 ++++++
>  drivers/gpu/drm/rockchip/dw_hdmi-rockchip.c        |  17 +-
>  include/drm/bridge/dw_hdmi.h                       |  35 +-
>  21 files changed, 765 insertions(+), 295 deletions(-)
>  create mode 100644 Documentation/devicetree/bindings/display/bridge/renesas,dw-hdmi.txt
>  create mode 100644 drivers/gpu/drm/rcar-du/rcar_dw_hdmi.c
>

Patches 01 to 13 are: Reviewed-by: Jose Abreu <joabreu@synopsys.com>

I have one minor comment for patch 12.

Best regards,
Jose Miguel Abreu