[PATCH v2 1/4] drm: Add a new connector property for link status

[PATCH v2 1/4] drm: Add a new connector property for link status

[Manasi Navare]

A new default connector property is added for keeping
track of whether the link is good (link training passed) or
link is bad (link training  failed). If the link status property
is not good, then userspace should fire off a new modeset at the current
mode even if there have not been any changes in the mode list
or connector status.
Also add link status connector member corersponding to the
decoded value of link status property.

v3: Add link status member to store property value locally
(Ville Syrjala)
v2:
* Make this a default connector property (Daniel Vetter)

Cc: dri-devel@lists.freedesktop.org
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Cc: Daniel Vetter <daniel.vetter@intel.com>
Cc: Ville Syrjala <ville.syrjala@linux.intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Manasi Navare <manasi.d.navare@intel.com>
---
 drivers/gpu/drm/drm_connector.c | 17 +++++++++++++++++
 include/drm/drm_connector.h     |  4 +++-
 include/drm/drm_crtc.h          |  5 +++++
 include/uapi/drm/drm_mode.h     |  4 ++++
 4 files changed, 29 insertions(+), 1 deletion(-)

diff --git a/drivers/gpu/drm/drm_connector.c b/drivers/gpu/drm/drm_connector.c
index 2db7fb5..d4e852f 100644
--- a/drivers/gpu/drm/drm_connector.c
+++ b/drivers/gpu/drm/drm_connector.c
@@ -243,6 +243,10 @@ int drm_connector_init(struct drm_device *dev,
 	drm_object_attach_property(&connector->base,
 				      config->dpms_property, 0);
 
+	drm_object_attach_property(&connector->base,
+				   config->link_status_property,
+				   0);
+
 	if (drm_core_check_feature(dev, DRIVER_ATOMIC)) {
 		drm_object_attach_property(&connector->base, config->prop_crtc_id, 0);
 	}
@@ -506,6 +510,12 @@ const char *drm_get_subpixel_order_name(enum subpixel_order order)
 };
 DRM_ENUM_NAME_FN(drm_get_dpms_name, drm_dpms_enum_list)
 
+static const struct drm_prop_enum_list drm_link_status_enum_list[] = {
+	{ DRM_MODE_LINK_STATUS_GOOD, "Good" },
+	{ DRM_MODE_LINK_STATUS_BAD, "Bad" },
+};
+DRM_ENUM_NAME_FN(drm_get_link_status_name, drm_link_status_enum_list)
+
 /**
  * drm_display_info_set_bus_formats - set the supported bus formats
  * @info: display info to store bus formats in
@@ -622,6 +632,13 @@ int drm_connector_create_standard_properties(struct drm_device *dev)
 		return -ENOMEM;
 	dev->mode_config.tile_property = prop;
 
+	prop = drm_property_create_enum(dev, 0, "link-status",
+					drm_link_status_enum_list,
+					ARRAY_SIZE(drm_link_status_enum_list));
+	if (!prop)
+		return -ENOMEM;
+	dev->mode_config.link_status_property = prop;
+
 	return 0;
 }
 
diff --git a/include/drm/drm_connector.h b/include/drm/drm_connector.h
index ac9d7d8..90387a1 100644
--- a/include/drm/drm_connector.h
+++ b/include/drm/drm_connector.h
@@ -682,6 +682,9 @@ struct drm_connector {
 	uint8_t num_h_tile, num_v_tile;
 	uint8_t tile_h_loc, tile_v_loc;
 	uint16_t tile_h_size, tile_v_size;
+
+	/* Connector Link status for link training */
+	bool link_status;
 };
 
 #define obj_to_connector(x) container_of(x, struct drm_connector, base)
@@ -754,7 +757,6 @@ int drm_mode_create_tv_properties(struct drm_device *dev,
 int drm_mode_create_scaling_mode_property(struct drm_device *dev);
 int drm_mode_create_aspect_ratio_property(struct drm_device *dev);
 int drm_mode_create_suggested_offset_properties(struct drm_device *dev);
-
 int drm_mode_connector_set_path_property(struct drm_connector *connector,
 					 const char *path);
 int drm_mode_connector_set_tile_property(struct drm_connector *connector);
diff --git a/include/drm/drm_crtc.h b/include/drm/drm_crtc.h
index fa1aa21..b86ca19 100644
--- a/include/drm/drm_crtc.h
+++ b/include/drm/drm_crtc.h
@@ -1151,6 +1151,11 @@ struct drm_mode_config {
 	 */
 	struct drm_property *tile_property;
 	/**
+	 * @link_status_property: Default connector property for link status
+	 * of a connector as a result of link training.
+	 */
+	struct drm_property *link_status_property;
+	/**
 	 * @plane_type_property: Default plane property to differentiate
 	 * CURSOR, PRIMARY and OVERLAY legacy uses of planes.
 	 */
diff --git a/include/uapi/drm/drm_mode.h b/include/uapi/drm/drm_mode.h
index 084b50a..f1b0afd 100644
--- a/include/uapi/drm/drm_mode.h
+++ b/include/uapi/drm/drm_mode.h
@@ -121,6 +121,10 @@
 #define DRM_MODE_DIRTY_ON       1
 #define DRM_MODE_DIRTY_ANNOTATE 2
 
+/* Link Status options */
+#define DRM_MODE_LINK_STATUS_GOOD	0
+#define DRM_MODE_LINK_STATUS_BAD	1
+
 struct drm_mode_modeinfo {
 	__u32 clock;
 	__u16 hdisplay;
-- 
1.9.1

_______________________________________________
Intel-gfx mailing list
Intel-gfx@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/intel-gfx

[PATCH v2 2/4] drm/i915: Set link status property for DP connector

[Manasi Navare]

This defines a helper function to set the property value.
This will be used to set the link status to Bad in case
of link training failures.

v2:
* Simplify the return value (Jani Nikula)

Cc: dri-devel@lists.freedesktop.org
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Cc: Daniel Vetter <daniel.vetter@intel.com>
Cc: Ville Syrjala <ville.syrjala@linux.intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Manasi Navare <manasi.d.navare@intel.com>
---
 drivers/gpu/drm/i915/intel_dp.c  | 11 +++++++++++
 drivers/gpu/drm/i915/intel_drv.h |  2 ++
 2 files changed, 13 insertions(+)

diff --git a/drivers/gpu/drm/i915/intel_dp.c b/drivers/gpu/drm/i915/intel_dp.c
index 1063afe..2b6f51c 100644
--- a/drivers/gpu/drm/i915/intel_dp.c
+++ b/drivers/gpu/drm/i915/intel_dp.c
@@ -4640,6 +4640,17 @@ static int intel_dp_get_modes(struct drm_connector *connector)
 	return 0;
 }
 
+int
+intel_dp_set_link_status_property(struct drm_connector *connector,
+				  uint64_t val)
+{
+	struct drm_device *dev = connector->dev;
+
+	return drm_object_property_set_value(&connector->base,
+					     dev->mode_config.link_status_property,
+					     val);
+}
+
 static int
 intel_dp_connector_register(struct drm_connector *connector)
 {
diff --git a/drivers/gpu/drm/i915/intel_drv.h b/drivers/gpu/drm/i915/intel_drv.h
index 2616d92..3cb7481 100644
--- a/drivers/gpu/drm/i915/intel_drv.h
+++ b/drivers/gpu/drm/i915/intel_drv.h
@@ -1391,6 +1391,8 @@ u32 skl_plane_stride(const struct drm_framebuffer *fb, int plane,
 bool intel_dp_init(struct drm_device *dev, i915_reg_t output_reg, enum port port);
 bool intel_dp_init_connector(struct intel_digital_port *intel_dig_port,
 			     struct intel_connector *intel_connector);
+int intel_dp_set_link_status_property(struct drm_connector *connector,
+				      uint64_t val);
 void intel_dp_set_link_params(struct intel_dp *intel_dp,
 			      int link_rate, uint8_t lane_count,
 			      bool link_mst);
-- 
1.9.1

_______________________________________________
Intel-gfx mailing list
Intel-gfx@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/intel-gfx

Re: [PATCH v2 1/4] drm: Add a new connector property for link status

[Jani Nikula]

On Sat, 29 Oct 2016, Manasi Navare <manasi.d.navare@intel.com> wrote:
> A new default connector property is added for keeping
> track of whether the link is good (link training passed) or
> link is bad (link training  failed). If the link status property
> is not good, then userspace should fire off a new modeset at the current
> mode even if there have not been any changes in the mode list
> or connector status.
> Also add link status connector member corersponding to the
> decoded value of link status property.

I'm still a bit uneasy about the name "link status", because I want it
to be evident that this is not just about display port link
layer. However, I don't have a good counter proposal, and it's easy to
change once we agree on everything else.

>
> v3: Add link status member to store property value locally
> (Ville Syrjala)
> v2:
> * Make this a default connector property (Daniel Vetter)
>
> Cc: dri-devel@lists.freedesktop.org
> Cc: Jani Nikula <jani.nikula@linux.intel.com>
> Cc: Daniel Vetter <daniel.vetter@intel.com>
> Cc: Ville Syrjala <ville.syrjala@linux.intel.com>
> Cc: Chris Wilson <chris@chris-wilson.co.uk>
> Signed-off-by: Manasi Navare <manasi.d.navare@intel.com>
> ---
>  drivers/gpu/drm/drm_connector.c | 17 +++++++++++++++++
>  include/drm/drm_connector.h     |  4 +++-
>  include/drm/drm_crtc.h          |  5 +++++
>  include/uapi/drm/drm_mode.h     |  4 ++++
>  4 files changed, 29 insertions(+), 1 deletion(-)
>
> diff --git a/drivers/gpu/drm/drm_connector.c b/drivers/gpu/drm/drm_connector.c
> index 2db7fb5..d4e852f 100644
> --- a/drivers/gpu/drm/drm_connector.c
> +++ b/drivers/gpu/drm/drm_connector.c
> @@ -243,6 +243,10 @@ int drm_connector_init(struct drm_device *dev,
>  	drm_object_attach_property(&connector->base,
>  				      config->dpms_property, 0);
>  
> +	drm_object_attach_property(&connector->base,
> +				   config->link_status_property,
> +				   0);
> +
>  	if (drm_core_check_feature(dev, DRIVER_ATOMIC)) {
>  		drm_object_attach_property(&connector->base, config->prop_crtc_id, 0);
>  	}
> @@ -506,6 +510,12 @@ const char *drm_get_subpixel_order_name(enum subpixel_order order)
>  };
>  DRM_ENUM_NAME_FN(drm_get_dpms_name, drm_dpms_enum_list)
>  
> +static const struct drm_prop_enum_list drm_link_status_enum_list[] = {
> +	{ DRM_MODE_LINK_STATUS_GOOD, "Good" },
> +	{ DRM_MODE_LINK_STATUS_BAD, "Bad" },
> +};
> +DRM_ENUM_NAME_FN(drm_get_link_status_name, drm_link_status_enum_list)
> +
>  /**
>   * drm_display_info_set_bus_formats - set the supported bus formats
>   * @info: display info to store bus formats in
> @@ -622,6 +632,13 @@ int drm_connector_create_standard_properties(struct drm_device *dev)
>  		return -ENOMEM;
>  	dev->mode_config.tile_property = prop;
>  
> +	prop = drm_property_create_enum(dev, 0, "link-status",
> +					drm_link_status_enum_list,
> +					ARRAY_SIZE(drm_link_status_enum_list));
> +	if (!prop)
> +		return -ENOMEM;
> +	dev->mode_config.link_status_property = prop;
> +
>  	return 0;
>  }
>  
> diff --git a/include/drm/drm_connector.h b/include/drm/drm_connector.h
> index ac9d7d8..90387a1 100644
> --- a/include/drm/drm_connector.h
> +++ b/include/drm/drm_connector.h
> @@ -682,6 +682,9 @@ struct drm_connector {
>  	uint8_t num_h_tile, num_v_tile;
>  	uint8_t tile_h_loc, tile_v_loc;
>  	uint16_t tile_h_size, tile_v_size;
> +
> +	/* Connector Link status for link training */

Drop the "link training" bit, this is not just about DP.

> +	bool link_status;

What does it mean for link status to be true or false? Which one is good
and which one is bad? Please either name this differently, or make this
an int and expect it to have the same values as the property.

>  };
>  
>  #define obj_to_connector(x) container_of(x, struct drm_connector, base)
> @@ -754,7 +757,6 @@ int drm_mode_create_tv_properties(struct drm_device *dev,
>  int drm_mode_create_scaling_mode_property(struct drm_device *dev);
>  int drm_mode_create_aspect_ratio_property(struct drm_device *dev);
>  int drm_mode_create_suggested_offset_properties(struct drm_device *dev);
> -
>  int drm_mode_connector_set_path_property(struct drm_connector *connector,
>  					 const char *path);
>  int drm_mode_connector_set_tile_property(struct drm_connector *connector);
> diff --git a/include/drm/drm_crtc.h b/include/drm/drm_crtc.h
> index fa1aa21..b86ca19 100644
> --- a/include/drm/drm_crtc.h
> +++ b/include/drm/drm_crtc.h
> @@ -1151,6 +1151,11 @@ struct drm_mode_config {
>  	 */
>  	struct drm_property *tile_property;
>  	/**
> +	 * @link_status_property: Default connector property for link status
> +	 * of a connector as a result of link training.

Same about "link training".

> +	 */
> +	struct drm_property *link_status_property;
> +	/**
>  	 * @plane_type_property: Default plane property to differentiate
>  	 * CURSOR, PRIMARY and OVERLAY legacy uses of planes.
>  	 */
> diff --git a/include/uapi/drm/drm_mode.h b/include/uapi/drm/drm_mode.h
> index 084b50a..f1b0afd 100644
> --- a/include/uapi/drm/drm_mode.h
> +++ b/include/uapi/drm/drm_mode.h
> @@ -121,6 +121,10 @@
>  #define DRM_MODE_DIRTY_ON       1
>  #define DRM_MODE_DIRTY_ANNOTATE 2
>  
> +/* Link Status options */
> +#define DRM_MODE_LINK_STATUS_GOOD	0
> +#define DRM_MODE_LINK_STATUS_BAD	1
> +
>  struct drm_mode_modeinfo {
>  	__u32 clock;
>  	__u16 hdisplay;

-- 
Jani Nikula, Intel Open Source Technology Center
_______________________________________________
Intel-gfx mailing list
Intel-gfx@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/intel-gfx

Re: [PATCH v2 2/4] drm/i915: Set link status property for DP connector

[Jani Nikula]

On Sat, 29 Oct 2016, Manasi Navare <manasi.d.navare@intel.com> wrote:
> This defines a helper function to set the property value.
> This will be used to set the link status to Bad in case
> of link training failures.
>
> v2:
> * Simplify the return value (Jani Nikula)
>
> Cc: dri-devel@lists.freedesktop.org
> Cc: Jani Nikula <jani.nikula@linux.intel.com>
> Cc: Daniel Vetter <daniel.vetter@intel.com>
> Cc: Ville Syrjala <ville.syrjala@linux.intel.com>
> Cc: Chris Wilson <chris@chris-wilson.co.uk>
> Signed-off-by: Manasi Navare <manasi.d.navare@intel.com>

Reviewed-by: Jani Nikula <jani.nikula@intel.com>


> ---
>  drivers/gpu/drm/i915/intel_dp.c  | 11 +++++++++++
>  drivers/gpu/drm/i915/intel_drv.h |  2 ++
>  2 files changed, 13 insertions(+)
>
> diff --git a/drivers/gpu/drm/i915/intel_dp.c b/drivers/gpu/drm/i915/intel_dp.c
> index 1063afe..2b6f51c 100644
> --- a/drivers/gpu/drm/i915/intel_dp.c
> +++ b/drivers/gpu/drm/i915/intel_dp.c
> @@ -4640,6 +4640,17 @@ static int intel_dp_get_modes(struct drm_connector *connector)
>  	return 0;
>  }
>  
> +int
> +intel_dp_set_link_status_property(struct drm_connector *connector,
> +				  uint64_t val)
> +{
> +	struct drm_device *dev = connector->dev;
> +
> +	return drm_object_property_set_value(&connector->base,
> +					     dev->mode_config.link_status_property,
> +					     val);
> +}
> +
>  static int
>  intel_dp_connector_register(struct drm_connector *connector)
>  {
> diff --git a/drivers/gpu/drm/i915/intel_drv.h b/drivers/gpu/drm/i915/intel_drv.h
> index 2616d92..3cb7481 100644
> --- a/drivers/gpu/drm/i915/intel_drv.h
> +++ b/drivers/gpu/drm/i915/intel_drv.h
> @@ -1391,6 +1391,8 @@ u32 skl_plane_stride(const struct drm_framebuffer *fb, int plane,
>  bool intel_dp_init(struct drm_device *dev, i915_reg_t output_reg, enum port port);
>  bool intel_dp_init_connector(struct intel_digital_port *intel_dig_port,
>  			     struct intel_connector *intel_connector);
> +int intel_dp_set_link_status_property(struct drm_connector *connector,
> +				      uint64_t val);
>  void intel_dp_set_link_params(struct intel_dp *intel_dp,
>  			      int link_rate, uint8_t lane_count,
>  			      bool link_mst);

-- 
Jani Nikula, Intel Open Source Technology Center
_______________________________________________
Intel-gfx mailing list
Intel-gfx@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/intel-gfx

[PATCH v3 1/4] drm: Add a new connector property for link status

[Manasi Navare]

A new default connector property is added for keeping
track of whether the link is good (link training passed) or
link is bad (link training  failed). If the link status property
is not good, then userspace should fire off a new modeset at the current
mode even if there have not been any changes in the mode list
or connector status.
Also add link status connector member corersponding to the
decoded value of link status property.

v3:
* Drop "link training" from description since this is
not specific to DP (Jani Nikula)
* Add link status member to store property value locally
(Ville Syrjala)
v2:
* Make this a default connector property (Daniel Vetter)

Cc: dri-devel@lists.freedesktop.org
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Cc: Daniel Vetter <daniel.vetter@intel.com>
Cc: Ville Syrjala <ville.syrjala@linux.intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Manasi Navare <manasi.d.navare@intel.com>
---
 drivers/gpu/drm/drm_connector.c | 17 +++++++++++++++++
 include/drm/drm_connector.h     |  7 ++++++-
 include/drm/drm_crtc.h          |  5 +++++
 include/uapi/drm/drm_mode.h     |  4 ++++
 4 files changed, 32 insertions(+), 1 deletion(-)

diff --git a/drivers/gpu/drm/drm_connector.c b/drivers/gpu/drm/drm_connector.c
index 2db7fb5..d4e852f 100644
--- a/drivers/gpu/drm/drm_connector.c
+++ b/drivers/gpu/drm/drm_connector.c
@@ -243,6 +243,10 @@ int drm_connector_init(struct drm_device *dev,
 	drm_object_attach_property(&connector->base,
 				      config->dpms_property, 0);
 
+	drm_object_attach_property(&connector->base,
+				   config->link_status_property,
+				   0);
+
 	if (drm_core_check_feature(dev, DRIVER_ATOMIC)) {
 		drm_object_attach_property(&connector->base, config->prop_crtc_id, 0);
 	}
@@ -506,6 +510,12 @@ const char *drm_get_subpixel_order_name(enum subpixel_order order)
 };
 DRM_ENUM_NAME_FN(drm_get_dpms_name, drm_dpms_enum_list)
 
+static const struct drm_prop_enum_list drm_link_status_enum_list[] = {
+	{ DRM_MODE_LINK_STATUS_GOOD, "Good" },
+	{ DRM_MODE_LINK_STATUS_BAD, "Bad" },
+};
+DRM_ENUM_NAME_FN(drm_get_link_status_name, drm_link_status_enum_list)
+
 /**
  * drm_display_info_set_bus_formats - set the supported bus formats
  * @info: display info to store bus formats in
@@ -622,6 +632,13 @@ int drm_connector_create_standard_properties(struct drm_device *dev)
 		return -ENOMEM;
 	dev->mode_config.tile_property = prop;
 
+	prop = drm_property_create_enum(dev, 0, "link-status",
+					drm_link_status_enum_list,
+					ARRAY_SIZE(drm_link_status_enum_list));
+	if (!prop)
+		return -ENOMEM;
+	dev->mode_config.link_status_property = prop;
+
 	return 0;
 }
 
diff --git a/include/drm/drm_connector.h b/include/drm/drm_connector.h
index ac9d7d8..5c335e8 100644
--- a/include/drm/drm_connector.h
+++ b/include/drm/drm_connector.h
@@ -682,6 +682,12 @@ struct drm_connector {
 	uint8_t num_h_tile, num_v_tile;
 	uint8_t tile_h_loc, tile_v_loc;
 	uint16_t tile_h_size, tile_v_size;
+
+	/* Connector Link status
+	 * 0: If the link is Good
+	 * 1: If the link is Bad
+	 */
+	int link_status;
 };
 
 #define obj_to_connector(x) container_of(x, struct drm_connector, base)
@@ -754,7 +760,6 @@ int drm_mode_create_tv_properties(struct drm_device *dev,
 int drm_mode_create_scaling_mode_property(struct drm_device *dev);
 int drm_mode_create_aspect_ratio_property(struct drm_device *dev);
 int drm_mode_create_suggested_offset_properties(struct drm_device *dev);
-
 int drm_mode_connector_set_path_property(struct drm_connector *connector,
 					 const char *path);
 int drm_mode_connector_set_tile_property(struct drm_connector *connector);
diff --git a/include/drm/drm_crtc.h b/include/drm/drm_crtc.h
index fa1aa21..737f4d3 100644
--- a/include/drm/drm_crtc.h
+++ b/include/drm/drm_crtc.h
@@ -1151,6 +1151,11 @@ struct drm_mode_config {
 	 */
 	struct drm_property *tile_property;
 	/**
+	 * @link_status_property: Default connector property for link status
+	 * of a connector
+	 */
+	struct drm_property *link_status_property;
+	/**
 	 * @plane_type_property: Default plane property to differentiate
 	 * CURSOR, PRIMARY and OVERLAY legacy uses of planes.
 	 */
diff --git a/include/uapi/drm/drm_mode.h b/include/uapi/drm/drm_mode.h
index 084b50a..f1b0afd 100644
--- a/include/uapi/drm/drm_mode.h
+++ b/include/uapi/drm/drm_mode.h
@@ -121,6 +121,10 @@
 #define DRM_MODE_DIRTY_ON       1
 #define DRM_MODE_DIRTY_ANNOTATE 2
 
+/* Link Status options */
+#define DRM_MODE_LINK_STATUS_GOOD	0
+#define DRM_MODE_LINK_STATUS_BAD	1
+
 struct drm_mode_modeinfo {
 	__u32 clock;
 	__u16 hdisplay;
-- 
1.9.1

_______________________________________________
Intel-gfx mailing list
Intel-gfx@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/intel-gfx

Re: [PATCH v3 1/4] drm: Add a new connector property for link status

[Jani Nikula]

On Mon, 31 Oct 2016, Manasi Navare <manasi.d.navare@intel.com> wrote:
> A new default connector property is added for keeping
> track of whether the link is good (link training passed) or
> link is bad (link training  failed). If the link status property
> is not good, then userspace should fire off a new modeset at the current
> mode even if there have not been any changes in the mode list
> or connector status.
> Also add link status connector member corersponding to the
> decoded value of link status property.

I think it would be good to expand on this, both in the commit message
and documentation. This is UABI after all.

When is the property changed, who changes it, what is the userspace
expected to do when the status goes from good to bad, how does userspace
notice it's gone bad (uevents).

While we want this for handling DP link training failures during mode
setting according to the DP spec, in a way that can pass the CTS, it's
also needed for async mode sets.

BR,
Jani.



>
> v3:
> * Drop "link training" from description since this is
> not specific to DP (Jani Nikula)
> * Add link status member to store property value locally
> (Ville Syrjala)
> v2:
> * Make this a default connector property (Daniel Vetter)
>
> Cc: dri-devel@lists.freedesktop.org
> Cc: Jani Nikula <jani.nikula@linux.intel.com>
> Cc: Daniel Vetter <daniel.vetter@intel.com>
> Cc: Ville Syrjala <ville.syrjala@linux.intel.com>
> Cc: Chris Wilson <chris@chris-wilson.co.uk>
> Signed-off-by: Manasi Navare <manasi.d.navare@intel.com>
> ---
>  drivers/gpu/drm/drm_connector.c | 17 +++++++++++++++++
>  include/drm/drm_connector.h     |  7 ++++++-
>  include/drm/drm_crtc.h          |  5 +++++
>  include/uapi/drm/drm_mode.h     |  4 ++++
>  4 files changed, 32 insertions(+), 1 deletion(-)
>
> diff --git a/drivers/gpu/drm/drm_connector.c b/drivers/gpu/drm/drm_connector.c
> index 2db7fb5..d4e852f 100644
> --- a/drivers/gpu/drm/drm_connector.c
> +++ b/drivers/gpu/drm/drm_connector.c
> @@ -243,6 +243,10 @@ int drm_connector_init(struct drm_device *dev,
>  	drm_object_attach_property(&connector->base,
>  				      config->dpms_property, 0);
>  
> +	drm_object_attach_property(&connector->base,
> +				   config->link_status_property,
> +				   0);
> +
>  	if (drm_core_check_feature(dev, DRIVER_ATOMIC)) {
>  		drm_object_attach_property(&connector->base, config->prop_crtc_id, 0);
>  	}
> @@ -506,6 +510,12 @@ const char *drm_get_subpixel_order_name(enum subpixel_order order)
>  };
>  DRM_ENUM_NAME_FN(drm_get_dpms_name, drm_dpms_enum_list)
>  
> +static const struct drm_prop_enum_list drm_link_status_enum_list[] = {
> +	{ DRM_MODE_LINK_STATUS_GOOD, "Good" },
> +	{ DRM_MODE_LINK_STATUS_BAD, "Bad" },
> +};
> +DRM_ENUM_NAME_FN(drm_get_link_status_name, drm_link_status_enum_list)
> +
>  /**
>   * drm_display_info_set_bus_formats - set the supported bus formats
>   * @info: display info to store bus formats in
> @@ -622,6 +632,13 @@ int drm_connector_create_standard_properties(struct drm_device *dev)
>  		return -ENOMEM;
>  	dev->mode_config.tile_property = prop;
>  
> +	prop = drm_property_create_enum(dev, 0, "link-status",
> +					drm_link_status_enum_list,
> +					ARRAY_SIZE(drm_link_status_enum_list));
> +	if (!prop)
> +		return -ENOMEM;
> +	dev->mode_config.link_status_property = prop;
> +
>  	return 0;
>  }
>  
> diff --git a/include/drm/drm_connector.h b/include/drm/drm_connector.h
> index ac9d7d8..5c335e8 100644
> --- a/include/drm/drm_connector.h
> +++ b/include/drm/drm_connector.h
> @@ -682,6 +682,12 @@ struct drm_connector {
>  	uint8_t num_h_tile, num_v_tile;
>  	uint8_t tile_h_loc, tile_v_loc;
>  	uint16_t tile_h_size, tile_v_size;
> +
> +	/* Connector Link status
> +	 * 0: If the link is Good
> +	 * 1: If the link is Bad
> +	 */
> +	int link_status;
>  };
>  
>  #define obj_to_connector(x) container_of(x, struct drm_connector, base)
> @@ -754,7 +760,6 @@ int drm_mode_create_tv_properties(struct drm_device *dev,
>  int drm_mode_create_scaling_mode_property(struct drm_device *dev);
>  int drm_mode_create_aspect_ratio_property(struct drm_device *dev);
>  int drm_mode_create_suggested_offset_properties(struct drm_device *dev);
> -
>  int drm_mode_connector_set_path_property(struct drm_connector *connector,
>  					 const char *path);
>  int drm_mode_connector_set_tile_property(struct drm_connector *connector);
> diff --git a/include/drm/drm_crtc.h b/include/drm/drm_crtc.h
> index fa1aa21..737f4d3 100644
> --- a/include/drm/drm_crtc.h
> +++ b/include/drm/drm_crtc.h
> @@ -1151,6 +1151,11 @@ struct drm_mode_config {
>  	 */
>  	struct drm_property *tile_property;
>  	/**
> +	 * @link_status_property: Default connector property for link status
> +	 * of a connector
> +	 */
> +	struct drm_property *link_status_property;
> +	/**
>  	 * @plane_type_property: Default plane property to differentiate
>  	 * CURSOR, PRIMARY and OVERLAY legacy uses of planes.
>  	 */
> diff --git a/include/uapi/drm/drm_mode.h b/include/uapi/drm/drm_mode.h
> index 084b50a..f1b0afd 100644
> --- a/include/uapi/drm/drm_mode.h
> +++ b/include/uapi/drm/drm_mode.h
> @@ -121,6 +121,10 @@
>  #define DRM_MODE_DIRTY_ON       1
>  #define DRM_MODE_DIRTY_ANNOTATE 2
>  
> +/* Link Status options */
> +#define DRM_MODE_LINK_STATUS_GOOD	0
> +#define DRM_MODE_LINK_STATUS_BAD	1
> +
>  struct drm_mode_modeinfo {
>  	__u32 clock;
>  	__u16 hdisplay;

-- 
Jani Nikula, Intel Open Source Technology Center
_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel