From: Jani Nikula <jani.nikula@linux.intel.com>
To: John.C.Harrison@Intel.com, Intel-GFX@Lists.FreeDesktop.Org
Cc: DRI-Devel@Lists.FreeDesktop.Org,
John Harrison <John.C.Harrison@Intel.com>
Subject: Re: [PATCH] drm/i915: Don't wait forever in drop_caches
Date: Wed, 02 Nov 2022 14:12:00 +0200 [thread overview]
Message-ID: <87k04d7dyn.fsf@intel.com> (raw)
In-Reply-To: <20221101235053.1650364-1-John.C.Harrison@Intel.com>
On Tue, 01 Nov 2022, John.C.Harrison@Intel.com wrote:
> From: John Harrison <John.C.Harrison@Intel.com>
>
> At the end of each test, IGT does a drop caches call via sysfs with
sysfs?
> special flags set. One of the possible paths waits for idle with an
> infinite timeout. That causes problems for debugging issues when CI
> catches a "can't go idle" test failure. Best case, the CI system times
> out (after 90s), attempts a bunch of state dump actions and then
> reboots the system to recover it. Worst case, the CI system can't do
> anything at all and then times out (after 1000s) and simply reboots.
> Sometimes a serial port log of dmesg might be available, sometimes not.
>
> So rather than making life hard for ourselves, change the timeout to
> be 10s rather than infinite. Also, trigger the standard
> wedge/reset/recover sequence so that testing can continue with a
> working system (if possible).
>
> Signed-off-by: John Harrison <John.C.Harrison@Intel.com>
> ---
> drivers/gpu/drm/i915/i915_debugfs.c | 7 ++++++-
> 1 file changed, 6 insertions(+), 1 deletion(-)
>
> diff --git a/drivers/gpu/drm/i915/i915_debugfs.c b/drivers/gpu/drm/i915/i915_debugfs.c
> index ae987e92251dd..9d916fbbfc27c 100644
> --- a/drivers/gpu/drm/i915/i915_debugfs.c
> +++ b/drivers/gpu/drm/i915/i915_debugfs.c
> @@ -641,6 +641,9 @@ DEFINE_SIMPLE_ATTRIBUTE(i915_perf_noa_delay_fops,
> DROP_RESET_ACTIVE | \
> DROP_RESET_SEQNO | \
> DROP_RCU)
> +
> +#define DROP_IDLE_TIMEOUT (HZ * 10)
I915_IDLE_ENGINES_TIMEOUT is defined in i915_drv.h. It's also only used
here.
I915_GEM_IDLE_TIMEOUT is defined in i915_gem.h. It's only used in
gt/intel_gt.c.
I915_GT_SUSPEND_IDLE_TIMEOUT is defined and used only in intel_gt_pm.c.
I915_IDLE_ENGINES_TIMEOUT is in ms, the rest are in jiffies.
My head spins.
BR,
Jani.
> +
> static int
> i915_drop_caches_get(void *data, u64 *val)
> {
> @@ -661,7 +664,9 @@ gt_drop_caches(struct intel_gt *gt, u64 val)
> intel_gt_retire_requests(gt);
>
> if (val & (DROP_IDLE | DROP_ACTIVE)) {
> - ret = intel_gt_wait_for_idle(gt, MAX_SCHEDULE_TIMEOUT);
> + ret = intel_gt_wait_for_idle(gt, DROP_IDLE_TIMEOUT);
> + if (ret == -ETIME)
> + intel_gt_set_wedged(gt);
> if (ret)
> return ret;
> }
--
Jani Nikula, Intel Open Source Graphics Center
next prev parent reply other threads:[~2022-11-02 12:12 UTC|newest]
Thread overview: 19+ messages / expand[flat|nested] mbox.gz Atom feed top
2022-11-01 23:50 [PATCH] drm/i915: Don't wait forever in drop_caches John.C.Harrison
2022-11-02 12:12 ` Jani Nikula [this message]
2022-11-02 14:20 ` [Intel-gfx] " Tvrtko Ursulin
2022-11-03 1:33 ` John Harrison
2022-11-03 9:18 ` Tvrtko Ursulin
2022-11-03 9:38 ` Tvrtko Ursulin
2022-11-03 19:16 ` John Harrison
2022-11-04 10:01 ` Tvrtko Ursulin
2022-11-04 17:45 ` John Harrison
2022-11-07 14:09 ` Tvrtko Ursulin
2022-11-07 19:45 ` John Harrison
2022-11-08 9:08 ` Tvrtko Ursulin
2022-11-08 19:37 ` John Harrison
2022-11-09 11:35 ` Tvrtko Ursulin
2022-11-10 6:20 ` John Harrison
2022-11-03 19:37 ` John Harrison
2022-11-03 10:45 ` Jani Nikula
2022-11-03 19:39 ` John Harrison
-- strict thread matches above, loose matches on Subject: below --
2022-11-03 1:35 John.C.Harrison
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=87k04d7dyn.fsf@intel.com \
--to=jani.nikula@linux.intel.com \
--cc=DRI-Devel@Lists.FreeDesktop.Org \
--cc=Intel-GFX@Lists.FreeDesktop.Org \
--cc=John.C.Harrison@Intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).