[RFC v3 0/8] drm/atomic: add async plane update

[RFC v3 0/8] drm/atomic: add async plane update

[Gustavo Padovan]

From: Gustavo Padovan <gustavo.padovan@collabora.com>

Hi,

One more take of Asynchronous Plane Updates over Atomic. Here I looked
to msm, vc4 and i915 to identify a common pattern to create atomic helpers
for async updates. So in patch 1 drm_atomic_async_check() and
drm_atomic_helper_async_commit() are introduced along with driver's plane hooks:
->atomic_async_check() and ->atomic_async_commit().

For now we only support async update for one plane at a time. Also the async
update can't modify the CRTC so no modesets are allowed.

Then the other patches add support for it in the drivers. I did virtio mostly
for testing. msm and vc4 are only compile-tested.

I started IGT changes to test the Atomic IOCTL with the new flag:

https://git.collabora.com/cgit/user/padovan/intel-gpu-tools.git/

Support for async page flips and drm core workers to delay plane/fb clean up
are not plane for this patchset.

TODO

* improve i-g-t tests where needed


Gustavo Padovan (8):
  drm/atomic: initial support for asynchronous plane update
  drm/virtio: support async cursor updates
  drm/i915: update cursors asynchronously through atomic
  drm/i915: remove intel_cursor_plane_funcs
  drm/msm: update cursors asynchronously through atomic
  drm/msm: remove mdp5_cursor_plane_funcs
  drm/vc4: update cursors asynchronously through atomic
  drm/atomic: add ASYNC_UPDATE flag to the Atomic IOCTL

 drivers/gpu/drm/drm_atomic.c              |  71 +++++++++++++
 drivers/gpu/drm/drm_atomic_helper.c       |  48 +++++++++
 drivers/gpu/drm/i915/intel_atomic_plane.c |  67 ++++++++++++
 drivers/gpu/drm/i915/intel_display.c      | 160 +++++-----------------------
 drivers/gpu/drm/msm/mdp/mdp5/mdp5_plane.c | 170 +++++++++++-------------------
 drivers/gpu/drm/vc4/vc4_plane.c           |  96 ++++++-----------
 drivers/gpu/drm/virtio/virtgpu_plane.c    |  48 +++++++++
 include/drm/drm_atomic.h                  |   2 +
 include/drm/drm_atomic_helper.h           |   2 +
 include/drm/drm_modeset_helper_vtables.h  |  48 +++++++++
 include/uapi/drm/drm_mode.h               |   4 +-
 11 files changed, 404 insertions(+), 312 deletions(-)

-- 
2.9.3

_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel

[RFC v3 1/8] drm/atomic: initial support for asynchronous plane update

[Gustavo Padovan]

From: Gustavo Padovan <gustavo.padovan@collabora.com>

In some cases, like cursor updates, it is interesting to update the
plane in an asynchronous fashion to avoid big delays. The current queued
update could be still waiting for a fence to signal and thus block any
subsequent update until its scan out. In cases like this if we update the
cursor synchronously through the atomic API it will cause significant
delays that would even be noticed by the final user.

This patch creates a fast path to jump ahead the current queued state and
do single planes updates without going through all atomic steps in
drm_atomic_helper_commit(). We take this path for legacy cursor updates.

For now only single plane updates are supported, but we plan to support
multiple planes updates and async PageFlips through this interface as well
in the near future.

v3:
	- fix iteration on the wrong crtc state
	- put back code to forbid updates if there is a queued update for
	the same plane (Ville Syrjälä)
	- move size checks back to drivers (Ville Syrjälä)
	- move ASYNC_UPDATE flag addition to its own patch (Ville Syrjälä)

v2:
	- allow updates even if there is a queued update for the same
	plane.
        - fixes on the documentation (Emil Velikov)
        - unconditionally call ->atomic_async_update (Emil Velikov)
        - check for ->atomic_async_update earlier (Daniel Vetter)
        - make ->atomic_async_check() the last step (Daniel Vetter)
        - add ASYNC_UPDATE flag (Eric Anholt)
        - update state in core after ->atomic_async_update (Eric Anholt)
	- update docs (Eric Anholt)

Cc: Daniel Vetter <daniel.vetter@intel.com>
Cc: Rob Clark <robdclark@gmail.com>
Cc: Eric Anholt <eric@anholt.net>
Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.com>
---
 drivers/gpu/drm/drm_atomic.c             | 65 ++++++++++++++++++++++++++++++++
 drivers/gpu/drm/drm_atomic_helper.c      | 35 +++++++++++++++++
 include/drm/drm_atomic.h                 |  2 +
 include/drm/drm_atomic_helper.h          |  2 +
 include/drm/drm_modeset_helper_vtables.h | 48 +++++++++++++++++++++++
 5 files changed, 152 insertions(+)

diff --git a/drivers/gpu/drm/drm_atomic.c b/drivers/gpu/drm/drm_atomic.c
index be62774..259a758 100644
--- a/drivers/gpu/drm/drm_atomic.c
+++ b/drivers/gpu/drm/drm_atomic.c
@@ -631,6 +631,68 @@ static int drm_atomic_crtc_check(struct drm_crtc *crtc,
 	return 0;
 }
 
+static bool drm_atomic_async_check(struct drm_atomic_state *state)
+{
+	struct drm_crtc *crtc;
+	struct drm_crtc_state *crtc_state;
+	struct drm_crtc_commit *commit;
+	struct drm_plane *__plane, *plane = NULL;
+	struct drm_plane_state *__plane_state, *plane_state = NULL;
+	const struct drm_plane_helper_funcs *funcs;
+	int i, j, n_planes = 0;
+
+	for_each_new_crtc_in_state(state, crtc, crtc_state, i) {
+		if (drm_atomic_crtc_needs_modeset(crtc_state))
+			return false;
+	}
+
+	for_each_new_plane_in_state(state, __plane, __plane_state, i) {
+		n_planes++;
+		plane = __plane;
+		plane_state = __plane_state;
+	}
+
+	/* FIXME: we support only single plane updates for now */
+	if (!plane || n_planes != 1)
+		return false;
+
+	if (!plane->state->crtc)
+		return false;
+
+	funcs = plane->helper_private;
+	if (!funcs->atomic_async_update)
+		return false;
+
+	if (plane_state->fence)
+		return false;
+
+	for_each_new_crtc_in_state(state, crtc, crtc_state, i) {
+		if (plane->crtc != crtc)
+			continue;
+
+		spin_lock(&crtc->commit_lock);
+		commit = list_first_entry_or_null(&crtc->commit_list,
+						  struct drm_crtc_commit,
+						  commit_entry);
+		if (!commit) {
+			spin_unlock(&crtc->commit_lock);
+			continue;
+		}
+		spin_unlock(&crtc->commit_lock);
+
+		if (!crtc->state->state)
+			continue;
+
+		for_each_plane_in_state(crtc->state->state, __plane,
+					__plane_state, j) {
+			if (__plane == plane)
+				return false;
+		}
+	}
+
+	return !funcs->atomic_async_check(plane, plane_state);
+}
+
 static void drm_atomic_crtc_print_state(struct drm_printer *p,
 		const struct drm_crtc_state *state)
 {
@@ -1591,6 +1653,9 @@ int drm_atomic_check_only(struct drm_atomic_state *state)
 		}
 	}
 
+	if (state->legacy_cursor_update)
+		state->async_update = drm_atomic_async_check(state);
+
 	return ret;
 }
 EXPORT_SYMBOL(drm_atomic_check_only);
diff --git a/drivers/gpu/drm/drm_atomic_helper.c b/drivers/gpu/drm/drm_atomic_helper.c
index 5a3c9c0..a8efdfe 100644
--- a/drivers/gpu/drm/drm_atomic_helper.c
+++ b/drivers/gpu/drm/drm_atomic_helper.c
@@ -1235,6 +1235,30 @@ static void commit_work(struct work_struct *work)
 }
 
 /**
+ * drm_atomic_helper_async_commit - commit state asynchronously
+ *
+ * This function commits a state asynchronously, i.e., not vblank
+ * synchronized. It should be used on a state only when
+ * drm_atomic_async_check() succeeds. Async commits are not supposed to swap
+ * the states like normal sync commits, but just do in-place changes on the
+ * current state.
+ */
+void drm_atomic_helper_async_commit(struct drm_device *dev,
+				    struct drm_atomic_state *state)
+{
+	struct drm_plane *plane;
+	struct drm_plane_state *plane_state;
+	const struct drm_plane_helper_funcs *funcs;
+	int i;
+
+	for_each_new_plane_in_state(state, plane, plane_state, i) {
+		funcs = plane->helper_private;
+		funcs->atomic_async_update(plane, plane_state);
+	}
+}
+EXPORT_SYMBOL(drm_atomic_helper_async_commit);
+
+/**
  * drm_atomic_helper_commit - commit validated state object
  * @dev: DRM device
  * @state: the driver state object
@@ -1258,6 +1282,17 @@ int drm_atomic_helper_commit(struct drm_device *dev,
 {
 	int ret;
 
+	if (state->async_update) {
+		ret = drm_atomic_helper_prepare_planes(dev, state);
+		if (ret)
+			return ret;
+
+		drm_atomic_helper_async_commit(dev, state);
+		drm_atomic_helper_cleanup_planes(dev, state);
+
+		return 0;
+	}
+
 	ret = drm_atomic_helper_setup_commit(state, nonblock);
 	if (ret)
 		return ret;
diff --git a/include/drm/drm_atomic.h b/include/drm/drm_atomic.h
index 788daf7..70ca279 100644
--- a/include/drm/drm_atomic.h
+++ b/include/drm/drm_atomic.h
@@ -160,6 +160,7 @@ struct __drm_connnectors_state {
  * @dev: parent DRM device
  * @allow_modeset: allow full modeset
  * @legacy_cursor_update: hint to enforce legacy cursor IOCTL semantics
+ * @async_update: hint for asynchronous plane update
  * @planes: pointer to array of structures with per-plane data
  * @crtcs: pointer to array of CRTC pointers
  * @num_connector: size of the @connectors and @connector_states arrays
@@ -172,6 +173,7 @@ struct drm_atomic_state {
 	struct drm_device *dev;
 	bool allow_modeset : 1;
 	bool legacy_cursor_update : 1;
+	bool async_update : 1;
 	struct __drm_planes_state *planes;
 	struct __drm_crtcs_state *crtcs;
 	int num_connector;
diff --git a/include/drm/drm_atomic_helper.h b/include/drm/drm_atomic_helper.h
index f0a8678..8571b51 100644
--- a/include/drm/drm_atomic_helper.h
+++ b/include/drm/drm_atomic_helper.h
@@ -44,6 +44,8 @@ void drm_atomic_helper_commit_tail(struct drm_atomic_state *state);
 int drm_atomic_helper_commit(struct drm_device *dev,
 			     struct drm_atomic_state *state,
 			     bool nonblock);
+void drm_atomic_helper_async_commit(struct drm_device *dev,
+				    struct drm_atomic_state *state);
 
 int drm_atomic_helper_wait_for_fences(struct drm_device *dev,
 					struct drm_atomic_state *state,
diff --git a/include/drm/drm_modeset_helper_vtables.h b/include/drm/drm_modeset_helper_vtables.h
index c01c328..7964a78 100644
--- a/include/drm/drm_modeset_helper_vtables.h
+++ b/include/drm/drm_modeset_helper_vtables.h
@@ -1048,6 +1048,54 @@ struct drm_plane_helper_funcs {
 	 */
 	void (*atomic_disable)(struct drm_plane *plane,
 			       struct drm_plane_state *old_state);
+
+	/**
+	 * @atomic_async_check:
+	 *
+	 * Drivers should set this function pointer to check if the plane state
+	 * can be updated in a async fashion. Here async means "not vblank
+	 * synchronized".
+	 *
+	 * This hook is called by drm_atomic_async_check() to establish if a
+	 * given update can be committed asynchronously, that is, if it can
+	 * jump ahead the state currently queued for update.
+	 *
+	 * RETURNS:
+	 *
+	 * Return 0 on success and any error returned indicates that the update
+	 * can not be applied in asynchronous manner.
+	 */
+	int (*atomic_async_check)(struct drm_plane *plane,
+				  struct drm_plane_state *state);
+
+	/**
+	 * @atomic_async_update:
+	 *
+	 * Drivers should set this function pointer to perform asynchronous
+	 * updates of planes, that is, jump ahead the currently queued
+	 * state for and update the plane. Here async means "not vblank
+	 * synchronized".
+	 *
+	 * This hook is called by drm_atomic_helper_async_commit().
+	 *
+	 * An async update will happen on legacy cursor updates.
+	 *
+	 * Note that unlike &drm_plane_helper_funcs.atomic_update this hook
+	 * takes the new &drm_plane_state as parameter. When doing async_update
+	 * drivers shouldn't replace the &drm_plane_state but update the
+	 * current one with the new plane configurations in the new
+	 * plane_state.
+	 *
+	 * FIXME:
+	 *  - It only works for single plane updates
+	 *  - Async Pageflips are not supported yet
+	 *  - Some hm might still scan out the old buffer until the next
+	 *  vblank, however we let go of the fb references as soon as
+	 *  we run this hook. For now drivers must implement their own workers
+	 *  for defering if needed, until a common solution is created.
+	 */
+	void (*atomic_async_update)(struct drm_plane *plane,
+				    struct drm_plane_state *new_state);
 };
 
 /**
-- 
2.9.3

_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel

[RFC v3 2/8] drm/virtio: support async cursor updates

[Gustavo Padovan]

From: Gustavo Padovan <gustavo.padovan@collabora.com>

Short circuit the update path for cursors and use the drm async update
infrastructure.

v2: move fb setting to core and use new state (Eric Anholt)

Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.com>

---
I wrote this mostly for testing purposes, not sure if its something that
we actually need for virtio.
---
 drivers/gpu/drm/virtio/virtgpu_plane.c | 53 ++++++++++++++++++++++++++++++++++
 1 file changed, 53 insertions(+)

diff --git a/drivers/gpu/drm/virtio/virtgpu_plane.c b/drivers/gpu/drm/virtio/virtgpu_plane.c
index 76d5fed..9b396c1 100644
--- a/drivers/gpu/drm/virtio/virtgpu_plane.c
+++ b/drivers/gpu/drm/virtio/virtgpu_plane.c
@@ -260,6 +260,57 @@ static void virtio_gpu_cursor_plane_update(struct drm_plane *plane,
 	virtio_gpu_cursor_ping(vgdev, output);
 }
 
+static int virtio_gpu_cursor_plane_async_check(struct drm_plane *plane,
+					       struct drm_plane_state *new_state)
+{
+	struct virtio_gpu_output *output;
+
+	if (!plane->state->crtc)
+		return -EINVAL;
+
+	output = drm_crtc_to_virtio_gpu_output(plane->state->crtc);
+	if (!output)
+		return -EINVAL;
+
+	if (plane->state->crtc != new_state->crtc ||
+	    plane->state->src_w != new_state->src_w ||
+	    plane->state->src_h != new_state->src_h ||
+	    plane->state->crtc_w != new_state->crtc_w ||
+	    plane->state->crtc_h != new_state->crtc_h ||
+	    !plane->state->fb ||
+	    plane->state->fb != new_state->fb)
+		return -EINVAL;
+
+	return 0;
+}
+
+static void virtio_gpu_cursor_plane_async_update(struct drm_plane *plane,
+						 struct drm_plane_state *new_state)
+{
+	struct drm_device *dev = plane->dev;
+	struct virtio_gpu_device *vgdev = dev->dev_private;
+	struct virtio_gpu_output *output = NULL;
+
+	output = drm_crtc_to_virtio_gpu_output(plane->state->crtc);
+	if (WARN_ON(!output))
+		return;
+
+	if (plane->state->fb != new_state->fb)
+		return;
+
+	plane->state->src_x = new_state->src_x;
+	plane->state->src_y = new_state->src_y;
+	plane->state->crtc_x = new_state->crtc_x;
+	plane->state->crtc_y = new_state->crtc_y;
+
+	DRM_DEBUG("move +%d+%d\n", plane->state->crtc_x, plane->state->crtc_y);
+
+	output->cursor.hdr.type = cpu_to_le32(VIRTIO_GPU_CMD_MOVE_CURSOR);
+	output->cursor.pos.x = cpu_to_le32(plane->state->crtc_x);
+	output->cursor.pos.y = cpu_to_le32(plane->state->crtc_y);
+	virtio_gpu_cursor_ping(vgdev, output);
+}
+
 static const struct drm_plane_helper_funcs virtio_gpu_primary_helper_funcs = {
 	.atomic_check		= virtio_gpu_plane_atomic_check,
 	.atomic_update		= virtio_gpu_primary_plane_update,
@@ -268,6 +319,8 @@ static const struct drm_plane_helper_funcs virtio_gpu_primary_helper_funcs = {
 static const struct drm_plane_helper_funcs virtio_gpu_cursor_helper_funcs = {
 	.atomic_check		= virtio_gpu_plane_atomic_check,
 	.atomic_update		= virtio_gpu_cursor_plane_update,
+	.atomic_async_check	= virtio_gpu_cursor_plane_async_check,
+	.atomic_async_update	= virtio_gpu_cursor_plane_async_update,
 };
 
 struct drm_plane *virtio_gpu_plane_init(struct virtio_gpu_device *vgdev,
-- 
2.9.3

_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel

[RFC v3 3/8] drm/i915: update cursors asynchronously through atomic

[Gustavo Padovan]

From: Gustavo Padovan <gustavo.padovan@collabora.com>

Add support to async updates of cursors by using the new atomic
interface for that. Basically what this commit does is do what
intel_legacy_cursor_update() did but through atomic.

v3:
	- set correct vma to new state for cleanup
	- move size checks back to drivers (Ville Syrjälä)

v2:
	- move fb setting to core and use new state (Eric Anholt)

Cc: Daniel Vetter <daniel.vetter@intel.com>
Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.com>
---
 drivers/gpu/drm/i915/intel_atomic_plane.c |  73 +++++++++++++++
 drivers/gpu/drm/i915/intel_display.c      | 149 +++++-------------------------
 2 files changed, 97 insertions(+), 125 deletions(-)

diff --git a/drivers/gpu/drm/i915/intel_atomic_plane.c b/drivers/gpu/drm/i915/intel_atomic_plane.c
index cfb4729..974c91f 100644
--- a/drivers/gpu/drm/i915/intel_atomic_plane.c
+++ b/drivers/gpu/drm/i915/intel_atomic_plane.c
@@ -246,11 +246,84 @@ static void intel_plane_atomic_update(struct drm_plane *plane,
 	}
 }
 
+static int intel_plane_atomic_async_check(struct drm_plane *plane,
+					  struct drm_plane_state *state)
+{
+	struct drm_crtc *crtc = plane->state->crtc;
+	struct drm_crtc_state *crtc_state = crtc->state;
+
+	if (plane->type != DRM_PLANE_TYPE_CURSOR)
+		return -EINVAL;
+
+	/*
+	 * When crtc is inactive or there is a modeset pending,
+	 * wait for it to complete in the slowpath
+	 */
+	if (!crtc_state->active || to_intel_crtc_state(crtc_state)->update_pipe)
+		return -EINVAL;
+
+	/*
+	 * If any parameters change that may affect watermarks,
+	 * take the slowpath. Only changing fb or position should be
+	 * in the fastpath.
+	 */
+	if (plane->state->crtc != state->crtc ||
+	    plane->state->src_w != state->src_w ||
+	    plane->state->src_h != state->src_h ||
+	    plane->state->crtc_w != state->crtc_w ||
+	    plane->state->crtc_h != state->crtc_h ||
+	    !plane->state->fb != !state->fb)
+		return -EINVAL;
+
+	return 0;
+}
+
+static void intel_plane_atomic_async_update(struct drm_plane *plane,
+					    struct drm_plane_state *new_state)
+{
+	struct intel_plane *intel_plane = to_intel_plane(plane);
+	struct drm_crtc *crtc = plane->state->crtc;
+	struct drm_framebuffer *old_fb;
+	struct i915_vma *old_vma;
+
+	old_vma = to_intel_plane_state(plane->state)->vma;
+	old_fb = plane->state->fb;
+
+	i915_gem_track_fb(intel_fb_obj(old_fb), intel_fb_obj(new_state->fb),
+			  intel_plane->frontbuffer_bit);
+
+	plane->state->src_x = new_state->src_x;
+	plane->state->src_y = new_state->src_y;
+	plane->state->crtc_x = new_state->crtc_x;
+	plane->state->crtc_y = new_state->crtc_y;
+	plane->state->fb = new_state->fb;
+	*to_intel_plane_state(plane->state) = *to_intel_plane_state(new_state);
+
+	to_intel_plane_state(new_state)->vma = old_vma;
+	new_state->fb = old_fb;
+
+	if (plane->state->visible) {
+		trace_intel_update_plane(plane, to_intel_crtc(crtc));
+		intel_plane->update_plane(plane,
+					  to_intel_crtc_state(crtc->state),
+					  to_intel_plane_state(plane->state));
+	} else {
+		trace_intel_disable_plane(plane, to_intel_crtc(crtc));
+		intel_plane->disable_plane(plane, crtc);
+	}
+
+	mutex_lock(&plane->dev->struct_mutex);
+	intel_cleanup_plane_fb(plane, new_state);
+	mutex_unlock(&plane->dev->struct_mutex);
+}
+
 const struct drm_plane_helper_funcs intel_plane_helper_funcs = {
 	.prepare_fb = intel_prepare_plane_fb,
 	.cleanup_fb = intel_cleanup_plane_fb,
 	.atomic_check = intel_plane_atomic_check,
 	.atomic_update = intel_plane_atomic_update,
+	.atomic_async_check = intel_plane_atomic_async_check,
+	.atomic_async_update = intel_plane_atomic_async_update,
 };
 
 /**
diff --git a/drivers/gpu/drm/i915/intel_display.c b/drivers/gpu/drm/i915/intel_display.c
index 207f144..7f4c8d3 100644
--- a/drivers/gpu/drm/i915/intel_display.c
+++ b/drivers/gpu/drm/i915/intel_display.c
@@ -13010,6 +13010,26 @@ static int intel_atomic_commit(struct drm_device *dev,
 	struct drm_i915_private *dev_priv = to_i915(dev);
 	int ret = 0;
 
+	/*
+	 * The atomic async update fast path takes care
+	 * of avoiding the vblank waits for simple cursor
+	 * movement and flips. For cursor on/off and size changes,
+	 * we want to perform the vblank waits so that watermark
+	 * updates happen during the correct frames. Gen9+ have
+	 * double buffered watermarks and so shouldn't need this.
+	 */
+	if (state->async_update) {
+		ret = mutex_lock_interruptible(&dev->struct_mutex);
+		if (ret)
+			return ret;
+
+		ret = drm_atomic_helper_prepare_planes(dev, state);
+		mutex_unlock(&dev->struct_mutex);
+
+		drm_atomic_helper_async_commit(dev, state);
+		return 0;
+	}
+
 	ret = drm_atomic_helper_setup_commit(state, nonblock);
 	if (ret)
 		return ret;
@@ -13168,6 +13188,9 @@ intel_prepare_plane_fb(struct drm_plane *plane,
 		}
 	}
 
+	if (new_state->state->async_update)
+		return 0;
+
 	if (!obj && !old_obj)
 		return 0;
 
@@ -13395,132 +13418,8 @@ const struct drm_plane_funcs intel_plane_funcs = {
 	.atomic_destroy_state = intel_plane_destroy_state,
 };
 
-static int
-intel_legacy_cursor_update(struct drm_plane *plane,
-			   struct drm_crtc *crtc,
-			   struct drm_framebuffer *fb,
-			   int crtc_x, int crtc_y,
-			   unsigned int crtc_w, unsigned int crtc_h,
-			   uint32_t src_x, uint32_t src_y,
-			   uint32_t src_w, uint32_t src_h,
-			   struct drm_modeset_acquire_ctx *ctx)
-{
-	struct drm_i915_private *dev_priv = to_i915(crtc->dev);
-	int ret;
-	struct drm_plane_state *old_plane_state, *new_plane_state;
-	struct intel_plane *intel_plane = to_intel_plane(plane);
-	struct drm_framebuffer *old_fb;
-	struct drm_crtc_state *crtc_state = crtc->state;
-	struct i915_vma *old_vma;
-
-	/*
-	 * When crtc is inactive or there is a modeset pending,
-	 * wait for it to complete in the slowpath
-	 */
-	if (!crtc_state->active || needs_modeset(crtc_state) ||
-	    to_intel_crtc_state(crtc_state)->update_pipe)
-		goto slow;
-
-	old_plane_state = plane->state;
-
-	/*
-	 * If any parameters change that may affect watermarks,
-	 * take the slowpath. Only changing fb or position should be
-	 * in the fastpath.
-	 */
-	if (old_plane_state->crtc != crtc ||
-	    old_plane_state->src_w != src_w ||
-	    old_plane_state->src_h != src_h ||
-	    old_plane_state->crtc_w != crtc_w ||
-	    old_plane_state->crtc_h != crtc_h ||
-	    !old_plane_state->fb != !fb)
-		goto slow;
-
-	new_plane_state = intel_plane_duplicate_state(plane);
-	if (!new_plane_state)
-		return -ENOMEM;
-
-	drm_atomic_set_fb_for_plane(new_plane_state, fb);
-
-	new_plane_state->src_x = src_x;
-	new_plane_state->src_y = src_y;
-	new_plane_state->src_w = src_w;
-	new_plane_state->src_h = src_h;
-	new_plane_state->crtc_x = crtc_x;
-	new_plane_state->crtc_y = crtc_y;
-	new_plane_state->crtc_w = crtc_w;
-	new_plane_state->crtc_h = crtc_h;
-
-	ret = intel_plane_atomic_check_with_state(to_intel_crtc_state(crtc->state),
-						  to_intel_plane_state(new_plane_state));
-	if (ret)
-		goto out_free;
-
-	ret = mutex_lock_interruptible(&dev_priv->drm.struct_mutex);
-	if (ret)
-		goto out_free;
-
-	if (INTEL_INFO(dev_priv)->cursor_needs_physical) {
-		int align = IS_I830(dev_priv) ? 16 * 1024 : 256;
-
-		ret = i915_gem_object_attach_phys(intel_fb_obj(fb), align);
-		if (ret) {
-			DRM_DEBUG_KMS("failed to attach phys object\n");
-			goto out_unlock;
-		}
-	} else {
-		struct i915_vma *vma;
-
-		vma = intel_pin_and_fence_fb_obj(fb, new_plane_state->rotation);
-		if (IS_ERR(vma)) {
-			DRM_DEBUG_KMS("failed to pin object\n");
-
-			ret = PTR_ERR(vma);
-			goto out_unlock;
-		}
-
-		to_intel_plane_state(new_plane_state)->vma = vma;
-	}
-
-	old_fb = old_plane_state->fb;
-	old_vma = to_intel_plane_state(old_plane_state)->vma;
-
-	i915_gem_track_fb(intel_fb_obj(old_fb), intel_fb_obj(fb),
-			  intel_plane->frontbuffer_bit);
-
-	/* Swap plane state */
-	new_plane_state->fence = old_plane_state->fence;
-	*to_intel_plane_state(old_plane_state) = *to_intel_plane_state(new_plane_state);
-	new_plane_state->fence = NULL;
-	new_plane_state->fb = old_fb;
-	to_intel_plane_state(new_plane_state)->vma = old_vma;
-
-	if (plane->state->visible) {
-		trace_intel_update_plane(plane, to_intel_crtc(crtc));
-		intel_plane->update_plane(plane,
-					  to_intel_crtc_state(crtc->state),
-					  to_intel_plane_state(plane->state));
-	} else {
-		trace_intel_disable_plane(plane, to_intel_crtc(crtc));
-		intel_plane->disable_plane(plane, crtc);
-	}
-
-	intel_cleanup_plane_fb(plane, new_plane_state);
-
-out_unlock:
-	mutex_unlock(&dev_priv->drm.struct_mutex);
-out_free:
-	intel_plane_destroy_state(plane, new_plane_state);
-	return ret;
-
-slow:
-	return drm_atomic_helper_update_plane(plane, crtc, fb,
-					      crtc_x, crtc_y, crtc_w, crtc_h,
-					      src_x, src_y, src_w, src_h, ctx);
-}
-
 static const struct drm_plane_funcs intel_cursor_plane_funcs = {
-	.update_plane = intel_legacy_cursor_update,
+	.update_plane = drm_atomic_helper_update_plane,
 	.disable_plane = drm_atomic_helper_disable_plane,
 	.destroy = intel_plane_destroy,
 	.set_property = drm_atomic_helper_plane_set_property,
-- 
2.9.3

_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel

[RFC v3 4/8] drm/i915: remove intel_cursor_plane_funcs

[Gustavo Padovan]

From: Gustavo Padovan <gustavo.padovan@collabora.com>

After converting legacy cursor updates to atomic async commits
intel_cursor_plane_funcs just duplicates intel_plane_funcs now.

Cc: Daniel Vetter <daniel.vetter@intel.com>
Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.com>
---
 drivers/gpu/drm/i915/intel_display.c | 13 +------------
 1 file changed, 1 insertion(+), 12 deletions(-)

diff --git a/drivers/gpu/drm/i915/intel_display.c b/drivers/gpu/drm/i915/intel_display.c
index 7f4c8d3..ee75165 100644
--- a/drivers/gpu/drm/i915/intel_display.c
+++ b/drivers/gpu/drm/i915/intel_display.c
@@ -13418,17 +13418,6 @@ const struct drm_plane_funcs intel_plane_funcs = {
 	.atomic_destroy_state = intel_plane_destroy_state,
 };
 
-static const struct drm_plane_funcs intel_cursor_plane_funcs = {
-	.update_plane = drm_atomic_helper_update_plane,
-	.disable_plane = drm_atomic_helper_disable_plane,
-	.destroy = intel_plane_destroy,
-	.set_property = drm_atomic_helper_plane_set_property,
-	.atomic_get_property = intel_plane_atomic_get_property,
-	.atomic_set_property = intel_plane_atomic_set_property,
-	.atomic_duplicate_state = intel_plane_duplicate_state,
-	.atomic_destroy_state = intel_plane_destroy_state,
-};
-
 static struct intel_plane *
 intel_primary_plane_create(struct drm_i915_private *dev_priv, enum pipe pipe)
 {
@@ -13675,7 +13664,7 @@ intel_cursor_plane_create(struct drm_i915_private *dev_priv, enum pipe pipe)
 	cursor->disable_plane = intel_disable_cursor_plane;
 
 	ret = drm_universal_plane_init(&dev_priv->drm, &cursor->base,
-				       0, &intel_cursor_plane_funcs,
+				       0, &intel_plane_funcs,
 				       intel_cursor_formats,
 				       ARRAY_SIZE(intel_cursor_formats),
 				       DRM_PLANE_TYPE_CURSOR,
-- 
2.9.3

_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel

[RFC v3 5/8] drm/msm: update cursors asynchronously through atomic

[Gustavo Padovan]

From: Gustavo Padovan <gustavo.padovan@collabora.com>

Add support to async updates of cursors by using the new atomic
interface for that. Basically what this commit does is do what
mdp5_update_cursor_plane_legacy() did but through atomic.

v3: move size checks back to drivers (Ville Syrjälä)

v2: move fb setting to core and use new state (Eric Anholt)

Cc: Rob Clark <robdclark@gmail.com>
Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.com>
---
 drivers/gpu/drm/msm/mdp/mdp5/mdp5_plane.c | 151 +++++++++++++-----------------
 1 file changed, 63 insertions(+), 88 deletions(-)

diff --git a/drivers/gpu/drm/msm/mdp/mdp5/mdp5_plane.c b/drivers/gpu/drm/msm/mdp/mdp5/mdp5_plane.c
index a38c5fe..07106c1 100644
--- a/drivers/gpu/drm/msm/mdp/mdp5/mdp5_plane.c
+++ b/drivers/gpu/drm/msm/mdp/mdp5/mdp5_plane.c
@@ -33,15 +33,6 @@ static int mdp5_plane_mode_set(struct drm_plane *plane,
 		struct drm_crtc *crtc, struct drm_framebuffer *fb,
 		struct drm_rect *src, struct drm_rect *dest);
 
-static int mdp5_update_cursor_plane_legacy(struct drm_plane *plane,
-		struct drm_crtc *crtc,
-		struct drm_framebuffer *fb,
-		int crtc_x, int crtc_y,
-		unsigned int crtc_w, unsigned int crtc_h,
-		uint32_t src_x, uint32_t src_y,
-		uint32_t src_w, uint32_t src_h,
-		struct drm_modeset_acquire_ctx *ctx);
-
 static struct mdp5_kms *get_kms(struct drm_plane *plane)
 {
 	struct msm_drm_private *priv = plane->dev->dev_private;
@@ -257,7 +248,7 @@ static const struct drm_plane_funcs mdp5_plane_funcs = {
 };
 
 static const struct drm_plane_funcs mdp5_cursor_plane_funcs = {
-		.update_plane = mdp5_update_cursor_plane_legacy,
+		.update_plane = drm_atomic_helper_update_plane,
 		.disable_plane = drm_atomic_helper_disable_plane,
 		.destroy = mdp5_plane_destroy,
 		.set_property = drm_atomic_helper_plane_set_property,
@@ -484,11 +475,73 @@ static void mdp5_plane_atomic_update(struct drm_plane *plane,
 	}
 }
 
+static int mdp5_plane_atomic_async_check(struct drm_plane *plane,
+					 struct drm_plane_state *state)
+{
+	struct mdp5_plane_state *mdp5_state = to_mdp5_plane_state(state);
+	struct drm_crtc_state *crtc_state;
+
+	crtc_state = drm_atomic_get_existing_crtc_state(state->state,
+							state->crtc);
+	if (WARN_ON(!crtc_state))
+		return -EINVAL;
+
+	if (!crtc_state->active)
+		return -EINVAL;
+
+	mdp5_state = to_mdp5_plane_state(state);
+
+	/* don't use fast path if we don't have a hwpipe allocated yet */
+	if (!mdp5_state->hwpipe)
+		return -EINVAL;
+
+	/* only allow changing of position(crtc x/y or src x/y) in fast path */
+	if (plane->state->crtc != state->crtc ||
+	    plane->state->src_w != state->src_w ||
+	    plane->state->src_h != state->src_h ||
+	    plane->state->crtc_w != state->crtc_w ||
+	    plane->state->crtc_h != state->crtc_h ||
+	    !plane->state->fb ||
+	    plane->state->fb != state->fb)
+		return -EINVAL;
+
+	return 0;
+}
+
+static void mdp5_plane_atomic_async_update(struct drm_plane *plane,
+					   struct drm_plane_state *new_state)
+{
+	plane->state->src_x = new_state->src_x;
+	plane->state->src_y = new_state->src_y;
+	plane->state->crtc_x = new_state->crtc_x;
+	plane->state->crtc_y = new_state->crtc_y;
+
+	if (plane_enabled(new_state)) {
+		struct mdp5_ctl *ctl;
+		struct mdp5_pipeline *pipeline =
+					mdp5_crtc_get_pipeline(plane->crtc);
+		int ret;
+
+		ret = mdp5_plane_mode_set(plane, new_state->crtc, new_state->fb,
+				&new_state->src, &new_state->dst);
+		WARN_ON(ret < 0);
+
+		ctl = mdp5_crtc_get_ctl(new_state->crtc);
+
+		mdp5_ctl_commit(ctl, pipeline, mdp5_plane_get_flush(plane));
+	}
+
+	*to_mdp5_plane_state(plane->state) =
+		*to_mdp5_plane_state(new_state);
+}
+
 static const struct drm_plane_helper_funcs mdp5_plane_helper_funcs = {
 		.prepare_fb = mdp5_plane_prepare_fb,
 		.cleanup_fb = mdp5_plane_cleanup_fb,
 		.atomic_check = mdp5_plane_atomic_check,
 		.atomic_update = mdp5_plane_atomic_update,
+		.atomic_async_check = mdp5_plane_atomic_async_check,
+		.atomic_async_update = mdp5_plane_atomic_async_update,
 };
 
 static void set_scanout_locked(struct mdp5_kms *mdp5_kms,
@@ -997,84 +1050,6 @@ static int mdp5_plane_mode_set(struct drm_plane *plane,
 	return ret;
 }
 
-static int mdp5_update_cursor_plane_legacy(struct drm_plane *plane,
-			struct drm_crtc *crtc, struct drm_framebuffer *fb,
-			int crtc_x, int crtc_y,
-			unsigned int crtc_w, unsigned int crtc_h,
-			uint32_t src_x, uint32_t src_y,
-			uint32_t src_w, uint32_t src_h,
-			struct drm_modeset_acquire_ctx *ctx)
-{
-	struct drm_plane_state *plane_state, *new_plane_state;
-	struct mdp5_plane_state *mdp5_pstate;
-	struct drm_crtc_state *crtc_state = crtc->state;
-	int ret;
-
-	if (!crtc_state->active || drm_atomic_crtc_needs_modeset(crtc_state))
-		goto slow;
-
-	plane_state = plane->state;
-	mdp5_pstate = to_mdp5_plane_state(plane_state);
-
-	/* don't use fast path if we don't have a hwpipe allocated yet */
-	if (!mdp5_pstate->hwpipe)
-		goto slow;
-
-	/* only allow changing of position(crtc x/y or src x/y) in fast path */
-	if (plane_state->crtc != crtc ||
-	    plane_state->src_w != src_w ||
-	    plane_state->src_h != src_h ||
-	    plane_state->crtc_w != crtc_w ||
-	    plane_state->crtc_h != crtc_h ||
-	    !plane_state->fb ||
-	    plane_state->fb != fb)
-		goto slow;
-
-	new_plane_state = mdp5_plane_duplicate_state(plane);
-	if (!new_plane_state)
-		return -ENOMEM;
-
-	new_plane_state->src_x = src_x;
-	new_plane_state->src_y = src_y;
-	new_plane_state->src_w = src_w;
-	new_plane_state->src_h = src_h;
-	new_plane_state->crtc_x = crtc_x;
-	new_plane_state->crtc_y = crtc_y;
-	new_plane_state->crtc_w = crtc_w;
-	new_plane_state->crtc_h = crtc_h;
-
-	ret = mdp5_plane_atomic_check_with_state(crtc_state, new_plane_state);
-	if (ret)
-		goto slow_free;
-
-	if (new_plane_state->visible) {
-		struct mdp5_ctl *ctl;
-		struct mdp5_pipeline *pipeline = mdp5_crtc_get_pipeline(crtc);
-
-		ret = mdp5_plane_mode_set(plane, crtc, fb,
-					  &new_plane_state->src,
-					  &new_plane_state->dst);
-		WARN_ON(ret < 0);
-
-		ctl = mdp5_crtc_get_ctl(crtc);
-
-		mdp5_ctl_commit(ctl, pipeline, mdp5_plane_get_flush(plane));
-	}
-
-	*to_mdp5_plane_state(plane_state) =
-		*to_mdp5_plane_state(new_plane_state);
-
-	mdp5_plane_destroy_state(plane, new_plane_state);
-
-	return 0;
-slow_free:
-	mdp5_plane_destroy_state(plane, new_plane_state);
-slow:
-	return drm_atomic_helper_update_plane(plane, crtc, fb,
-					      crtc_x, crtc_y, crtc_w, crtc_h,
-					      src_x, src_y, src_w, src_h, ctx);
-}
-
 /*
  * Use this func and the one below only after the atomic state has been
  * successfully swapped
-- 
2.9.3

_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel

Re: [RFC v3 5/8] drm/msm: update cursors asynchronously through atomic

[Archit Taneja]

On 5/13/2017 12:40 AM, Gustavo Padovan wrote:
> From: Gustavo Padovan <gustavo.padovan@collabora.com>
> 
> Add support to async updates of cursors by using the new atomic
> interface for that. Basically what this commit does is do what
> mdp5_update_cursor_plane_legacy() did but through atomic.

Works well on DB820c (which has a APQ8096 SoC).

Tested-by: Archit Taneja <architt@codeaurora.org>

> 
> v3: move size checks back to drivers (Ville Syrjälä)
> 
> v2: move fb setting to core and use new state (Eric Anholt)
> 
> Cc: Rob Clark <robdclark@gmail.com>
> Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.com>
> ---
>   drivers/gpu/drm/msm/mdp/mdp5/mdp5_plane.c | 151 +++++++++++++-----------------
>   1 file changed, 63 insertions(+), 88 deletions(-)
> 
> diff --git a/drivers/gpu/drm/msm/mdp/mdp5/mdp5_plane.c b/drivers/gpu/drm/msm/mdp/mdp5/mdp5_plane.c
> index a38c5fe..07106c1 100644
> --- a/drivers/gpu/drm/msm/mdp/mdp5/mdp5_plane.c
> +++ b/drivers/gpu/drm/msm/mdp/mdp5/mdp5_plane.c
> @@ -33,15 +33,6 @@ static int mdp5_plane_mode_set(struct drm_plane *plane,
>   		struct drm_crtc *crtc, struct drm_framebuffer *fb,
>   		struct drm_rect *src, struct drm_rect *dest);
>   
> -static int mdp5_update_cursor_plane_legacy(struct drm_plane *plane,
> -		struct drm_crtc *crtc,
> -		struct drm_framebuffer *fb,
> -		int crtc_x, int crtc_y,
> -		unsigned int crtc_w, unsigned int crtc_h,
> -		uint32_t src_x, uint32_t src_y,
> -		uint32_t src_w, uint32_t src_h,
> -		struct drm_modeset_acquire_ctx *ctx);
> -
>   static struct mdp5_kms *get_kms(struct drm_plane *plane)
>   {
>   	struct msm_drm_private *priv = plane->dev->dev_private;
> @@ -257,7 +248,7 @@ static const struct drm_plane_funcs mdp5_plane_funcs = {
>   };
>   
>   static const struct drm_plane_funcs mdp5_cursor_plane_funcs = {
> -		.update_plane = mdp5_update_cursor_plane_legacy,
> +		.update_plane = drm_atomic_helper_update_plane,
>   		.disable_plane = drm_atomic_helper_disable_plane,
>   		.destroy = mdp5_plane_destroy,
>   		.set_property = drm_atomic_helper_plane_set_property,
> @@ -484,11 +475,73 @@ static void mdp5_plane_atomic_update(struct drm_plane *plane,
>   	}
>   }
>   
> +static int mdp5_plane_atomic_async_check(struct drm_plane *plane,
> +					 struct drm_plane_state *state)
> +{
> +	struct mdp5_plane_state *mdp5_state = to_mdp5_plane_state(state);
> +	struct drm_crtc_state *crtc_state;
> +
> +	crtc_state = drm_atomic_get_existing_crtc_state(state->state,
> +							state->crtc);
> +	if (WARN_ON(!crtc_state))
> +		return -EINVAL;
> +
> +	if (!crtc_state->active)
> +		return -EINVAL;
> +
> +	mdp5_state = to_mdp5_plane_state(state);
> +
> +	/* don't use fast path if we don't have a hwpipe allocated yet */
> +	if (!mdp5_state->hwpipe)
> +		return -EINVAL;
> +
> +	/* only allow changing of position(crtc x/y or src x/y) in fast path */
> +	if (plane->state->crtc != state->crtc ||
> +	    plane->state->src_w != state->src_w ||
> +	    plane->state->src_h != state->src_h ||
> +	    plane->state->crtc_w != state->crtc_w ||
> +	    plane->state->crtc_h != state->crtc_h ||
> +	    !plane->state->fb ||
> +	    plane->state->fb != state->fb)
> +		return -EINVAL;
> +
> +	return 0;
> +}
> +
> +static void mdp5_plane_atomic_async_update(struct drm_plane *plane,
> +					   struct drm_plane_state *new_state)
> +{
> +	plane->state->src_x = new_state->src_x;
> +	plane->state->src_y = new_state->src_y;
> +	plane->state->crtc_x = new_state->crtc_x;
> +	plane->state->crtc_y = new_state->crtc_y;
> +
> +	if (plane_enabled(new_state)) {
> +		struct mdp5_ctl *ctl;
> +		struct mdp5_pipeline *pipeline =
> +					mdp5_crtc_get_pipeline(plane->crtc);
> +		int ret;
> +
> +		ret = mdp5_plane_mode_set(plane, new_state->crtc, new_state->fb,
> +				&new_state->src, &new_state->dst);
> +		WARN_ON(ret < 0);
> +
> +		ctl = mdp5_crtc_get_ctl(new_state->crtc);
> +
> +		mdp5_ctl_commit(ctl, pipeline, mdp5_plane_get_flush(plane));
> +	}
> +
> +	*to_mdp5_plane_state(plane->state) =
> +		*to_mdp5_plane_state(new_state);
> +}
> +
>   static const struct drm_plane_helper_funcs mdp5_plane_helper_funcs = {
>   		.prepare_fb = mdp5_plane_prepare_fb,
>   		.cleanup_fb = mdp5_plane_cleanup_fb,
>   		.atomic_check = mdp5_plane_atomic_check,
>   		.atomic_update = mdp5_plane_atomic_update,
> +		.atomic_async_check = mdp5_plane_atomic_async_check,
> +		.atomic_async_update = mdp5_plane_atomic_async_update,
>   };
>   
>   static void set_scanout_locked(struct mdp5_kms *mdp5_kms,
> @@ -997,84 +1050,6 @@ static int mdp5_plane_mode_set(struct drm_plane *plane,
>   	return ret;
>   }
>   
> -static int mdp5_update_cursor_plane_legacy(struct drm_plane *plane,
> -			struct drm_crtc *crtc, struct drm_framebuffer *fb,
> -			int crtc_x, int crtc_y,
> -			unsigned int crtc_w, unsigned int crtc_h,
> -			uint32_t src_x, uint32_t src_y,
> -			uint32_t src_w, uint32_t src_h,
> -			struct drm_modeset_acquire_ctx *ctx)
> -{
> -	struct drm_plane_state *plane_state, *new_plane_state;
> -	struct mdp5_plane_state *mdp5_pstate;
> -	struct drm_crtc_state *crtc_state = crtc->state;
> -	int ret;
> -
> -	if (!crtc_state->active || drm_atomic_crtc_needs_modeset(crtc_state))
> -		goto slow;
> -
> -	plane_state = plane->state;
> -	mdp5_pstate = to_mdp5_plane_state(plane_state);
> -
> -	/* don't use fast path if we don't have a hwpipe allocated yet */
> -	if (!mdp5_pstate->hwpipe)
> -		goto slow;
> -
> -	/* only allow changing of position(crtc x/y or src x/y) in fast path */
> -	if (plane_state->crtc != crtc ||
> -	    plane_state->src_w != src_w ||
> -	    plane_state->src_h != src_h ||
> -	    plane_state->crtc_w != crtc_w ||
> -	    plane_state->crtc_h != crtc_h ||
> -	    !plane_state->fb ||
> -	    plane_state->fb != fb)
> -		goto slow;
> -
> -	new_plane_state = mdp5_plane_duplicate_state(plane);
> -	if (!new_plane_state)
> -		return -ENOMEM;
> -
> -	new_plane_state->src_x = src_x;
> -	new_plane_state->src_y = src_y;
> -	new_plane_state->src_w = src_w;
> -	new_plane_state->src_h = src_h;
> -	new_plane_state->crtc_x = crtc_x;
> -	new_plane_state->crtc_y = crtc_y;
> -	new_plane_state->crtc_w = crtc_w;
> -	new_plane_state->crtc_h = crtc_h;
> -
> -	ret = mdp5_plane_atomic_check_with_state(crtc_state, new_plane_state);
> -	if (ret)
> -		goto slow_free;
> -
> -	if (new_plane_state->visible) {
> -		struct mdp5_ctl *ctl;
> -		struct mdp5_pipeline *pipeline = mdp5_crtc_get_pipeline(crtc);
> -
> -		ret = mdp5_plane_mode_set(plane, crtc, fb,
> -					  &new_plane_state->src,
> -					  &new_plane_state->dst);
> -		WARN_ON(ret < 0);
> -
> -		ctl = mdp5_crtc_get_ctl(crtc);
> -
> -		mdp5_ctl_commit(ctl, pipeline, mdp5_plane_get_flush(plane));
> -	}
> -
> -	*to_mdp5_plane_state(plane_state) =
> -		*to_mdp5_plane_state(new_plane_state);
> -
> -	mdp5_plane_destroy_state(plane, new_plane_state);
> -
> -	return 0;
> -slow_free:
> -	mdp5_plane_destroy_state(plane, new_plane_state);
> -slow:
> -	return drm_atomic_helper_update_plane(plane, crtc, fb,
> -					      crtc_x, crtc_y, crtc_w, crtc_h,
> -					      src_x, src_y, src_w, src_h, ctx);
> -}
> -
>   /*
>    * Use this func and the one below only after the atomic state has been
>    * successfully swapped
> 

-- 
The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum,
hosted by The Linux Foundation
_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel

Re: [RFC v3 5/8] drm/msm: update cursors asynchronously through atomic

[Archit Taneja]

Hi,

On 05/16/2017 08:14 PM, Archit Taneja wrote:
>
>
> On 5/13/2017 12:40 AM, Gustavo Padovan wrote:
>> From: Gustavo Padovan <gustavo.padovan@collabora.com>
>>
>> Add support to async updates of cursors by using the new atomic
>> interface for that. Basically what this commit does is do what
>> mdp5_update_cursor_plane_legacy() did but through atomic.
>
> Works well on DB820c (which has a APQ8096 SoC).
>
> Tested-by: Archit Taneja <architt@codeaurora.org>

Actually, after some more thorough testing, I found one issue, mentioned below.

>
>>
>> v3: move size checks back to drivers (Ville Syrjälä)
>>
>> v2: move fb setting to core and use new state (Eric Anholt)
>>
>> Cc: Rob Clark <robdclark@gmail.com>
>> Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.com>
>> ---
>>   drivers/gpu/drm/msm/mdp/mdp5/mdp5_plane.c | 151 +++++++++++++-----------------
>>   1 file changed, 63 insertions(+), 88 deletions(-)
>>
>> diff --git a/drivers/gpu/drm/msm/mdp/mdp5/mdp5_plane.c b/drivers/gpu/drm/msm/mdp/mdp5/mdp5_plane.c
>> index a38c5fe..07106c1 100644
>> --- a/drivers/gpu/drm/msm/mdp/mdp5/mdp5_plane.c
>> +++ b/drivers/gpu/drm/msm/mdp/mdp5/mdp5_plane.c
>> @@ -33,15 +33,6 @@ static int mdp5_plane_mode_set(struct drm_plane *plane,
>>           struct drm_crtc *crtc, struct drm_framebuffer *fb,
>>           struct drm_rect *src, struct drm_rect *dest);
>>   -static int mdp5_update_cursor_plane_legacy(struct drm_plane *plane,
>> -        struct drm_crtc *crtc,
>> -        struct drm_framebuffer *fb,
>> -        int crtc_x, int crtc_y,
>> -        unsigned int crtc_w, unsigned int crtc_h,
>> -        uint32_t src_x, uint32_t src_y,
>> -        uint32_t src_w, uint32_t src_h,
>> -        struct drm_modeset_acquire_ctx *ctx);
>> -
>>   static struct mdp5_kms *get_kms(struct drm_plane *plane)
>>   {
>>       struct msm_drm_private *priv = plane->dev->dev_private;
>> @@ -257,7 +248,7 @@ static const struct drm_plane_funcs mdp5_plane_funcs = {
>>   };
>>     static const struct drm_plane_funcs mdp5_cursor_plane_funcs = {
>> -        .update_plane = mdp5_update_cursor_plane_legacy,
>> +        .update_plane = drm_atomic_helper_update_plane,
>>           .disable_plane = drm_atomic_helper_disable_plane,
>>           .destroy = mdp5_plane_destroy,
>>           .set_property = drm_atomic_helper_plane_set_property,
>> @@ -484,11 +475,73 @@ static void mdp5_plane_atomic_update(struct drm_plane *plane,
>>       }
>>   }
>>   +static int mdp5_plane_atomic_async_check(struct drm_plane *plane,
>> +                     struct drm_plane_state *state)
>> +{
>> +    struct mdp5_plane_state *mdp5_state = to_mdp5_plane_state(state);
>> +    struct drm_crtc_state *crtc_state;
>> +
>> +    crtc_state = drm_atomic_get_existing_crtc_state(state->state,
>> +                            state->crtc);

I see a kernel splat here (a NULL pointer dereference). The async_check
function assumes that there is always going to be a plane_state->crtc
available. This doesn't seem to be the case at least in the
drm_atomic_helper_disable_plane() path. Moving the check to set
legacy_cursor_update after calling __drm_atomic_helper_disable_plane()
seems to fix the issue. Do you think it's a legit fix?

One more point w.r.t msm driver is that we don't use the default
drm_atomic_helper_commit() for our atomic_commit op. So I had to
call drm_atomic_helper_async_commit() from our atomic_commit
implementation
(i.e, in msm_atomic_commit in drivers/gpu/drm/msm/msm_atomic.c)

Thanks,
Archit

>> +    if (WARN_ON(!crtc_state))
>> +        return -EINVAL;
>> +
>> +    if (!crtc_state->active)
>> +        return -EINVAL;
>> +
>> +    mdp5_state = to_mdp5_plane_state(state);
>> +
>> +    /* don't use fast path if we don't have a hwpipe allocated yet */
>> +    if (!mdp5_state->hwpipe)
>> +        return -EINVAL;
>> +
>> +    /* only allow changing of position(crtc x/y or src x/y) in fast path */
>> +    if (plane->state->crtc != state->crtc ||
>> +        plane->state->src_w != state->src_w ||
>> +        plane->state->src_h != state->src_h ||
>> +        plane->state->crtc_w != state->crtc_w ||
>> +        plane->state->crtc_h != state->crtc_h ||
>> +        !plane->state->fb ||
>> +        plane->state->fb != state->fb)
>> +        return -EINVAL;
>> +
>> +    return 0;
>> +}
>> +
>> +static void mdp5_plane_atomic_async_update(struct drm_plane *plane,
>> +                       struct drm_plane_state *new_state)
>> +{
>> +    plane->state->src_x = new_state->src_x;
>> +    plane->state->src_y = new_state->src_y;
>> +    plane->state->crtc_x = new_state->crtc_x;
>> +    plane->state->crtc_y = new_state->crtc_y;
>> +
>> +    if (plane_enabled(new_state)) {
>> +        struct mdp5_ctl *ctl;
>> +        struct mdp5_pipeline *pipeline =
>> +                    mdp5_crtc_get_pipeline(plane->crtc);
>> +        int ret;
>> +
>> +        ret = mdp5_plane_mode_set(plane, new_state->crtc, new_state->fb,
>> +                &new_state->src, &new_state->dst);
>> +        WARN_ON(ret < 0);
>> +
>> +        ctl = mdp5_crtc_get_ctl(new_state->crtc);
>> +
>> +        mdp5_ctl_commit(ctl, pipeline, mdp5_plane_get_flush(plane));
>> +    }
>> +
>> +    *to_mdp5_plane_state(plane->state) =
>> +        *to_mdp5_plane_state(new_state);
>> +}
>> +
>>   static const struct drm_plane_helper_funcs mdp5_plane_helper_funcs = {
>>           .prepare_fb = mdp5_plane_prepare_fb,
>>           .cleanup_fb = mdp5_plane_cleanup_fb,
>>           .atomic_check = mdp5_plane_atomic_check,
>>           .atomic_update = mdp5_plane_atomic_update,
>> +        .atomic_async_check = mdp5_plane_atomic_async_check,
>> +        .atomic_async_update = mdp5_plane_atomic_async_update,
>>   };
>>     static void set_scanout_locked(struct mdp5_kms *mdp5_kms,
>> @@ -997,84 +1050,6 @@ static int mdp5_plane_mode_set(struct drm_plane *plane,
>>       return ret;
>>   }
>>   -static int mdp5_update_cursor_plane_legacy(struct drm_plane *plane,
>> -            struct drm_crtc *crtc, struct drm_framebuffer *fb,
>> -            int crtc_x, int crtc_y,
>> -            unsigned int crtc_w, unsigned int crtc_h,
>> -            uint32_t src_x, uint32_t src_y,
>> -            uint32_t src_w, uint32_t src_h,
>> -            struct drm_modeset_acquire_ctx *ctx)
>> -{
>> -    struct drm_plane_state *plane_state, *new_plane_state;
>> -    struct mdp5_plane_state *mdp5_pstate;
>> -    struct drm_crtc_state *crtc_state = crtc->state;
>> -    int ret;
>> -
>> -    if (!crtc_state->active || drm_atomic_crtc_needs_modeset(crtc_state))
>> -        goto slow;
>> -
>> -    plane_state = plane->state;
>> -    mdp5_pstate = to_mdp5_plane_state(plane_state);
>> -
>> -    /* don't use fast path if we don't have a hwpipe allocated yet */
>> -    if (!mdp5_pstate->hwpipe)
>> -        goto slow;
>> -
>> -    /* only allow changing of position(crtc x/y or src x/y) in fast path */
>> -    if (plane_state->crtc != crtc ||
>> -        plane_state->src_w != src_w ||
>> -        plane_state->src_h != src_h ||
>> -        plane_state->crtc_w != crtc_w ||
>> -        plane_state->crtc_h != crtc_h ||
>> -        !plane_state->fb ||
>> -        plane_state->fb != fb)
>> -        goto slow;
>> -
>> -    new_plane_state = mdp5_plane_duplicate_state(plane);
>> -    if (!new_plane_state)
>> -        return -ENOMEM;
>> -
>> -    new_plane_state->src_x = src_x;
>> -    new_plane_state->src_y = src_y;
>> -    new_plane_state->src_w = src_w;
>> -    new_plane_state->src_h = src_h;
>> -    new_plane_state->crtc_x = crtc_x;
>> -    new_plane_state->crtc_y = crtc_y;
>> -    new_plane_state->crtc_w = crtc_w;
>> -    new_plane_state->crtc_h = crtc_h;
>> -
>> -    ret = mdp5_plane_atomic_check_with_state(crtc_state, new_plane_state);
>> -    if (ret)
>> -        goto slow_free;
>> -
>> -    if (new_plane_state->visible) {
>> -        struct mdp5_ctl *ctl;
>> -        struct mdp5_pipeline *pipeline = mdp5_crtc_get_pipeline(crtc);
>> -
>> -        ret = mdp5_plane_mode_set(plane, crtc, fb,
>> -                      &new_plane_state->src,
>> -                      &new_plane_state->dst);
>> -        WARN_ON(ret < 0);
>> -
>> -        ctl = mdp5_crtc_get_ctl(crtc);
>> -
>> -        mdp5_ctl_commit(ctl, pipeline, mdp5_plane_get_flush(plane));
>> -    }
>> -
>> -    *to_mdp5_plane_state(plane_state) =
>> -        *to_mdp5_plane_state(new_plane_state);
>> -
>> -    mdp5_plane_destroy_state(plane, new_plane_state);
>> -
>> -    return 0;
>> -slow_free:
>> -    mdp5_plane_destroy_state(plane, new_plane_state);
>> -slow:
>> -    return drm_atomic_helper_update_plane(plane, crtc, fb,
>> -                          crtc_x, crtc_y, crtc_w, crtc_h,
>> -                          src_x, src_y, src_w, src_h, ctx);
>> -}
>> -
>>   /*
>>    * Use this func and the one below only after the atomic state has been
>>    * successfully swapped
>>
>

diff --git a/drivers/gpu/drm/drm_atomic_helper.c b/drivers/gpu/drm/drm_atomic_helper.c
index 19e5a4f5529a..b384c985cd08 100644
--- a/drivers/gpu/drm/drm_atomic_helper.c
+++ b/drivers/gpu/drm/drm_atomic_helper.c
@@ -2230,13 +2230,14 @@ int drm_atomic_helper_disable_plane(struct drm_plane *plane,
  		goto fail;
  	}

-	if (plane_state->crtc && (plane == plane->crtc->cursor))
-		plane_state->state->legacy_cursor_update = true;
-
  	ret = __drm_atomic_helper_disable_plane(plane, plane_state);
  	if (ret != 0)
  		goto fail;

+	if (plane_state->crtc && (plane == plane->crtc->cursor))
+		plane_state->state->legacy_cursor_update = true;
+
+
  	ret = drm_atomic_commit(state);
  fail:
  	drm_atomic_state_put(state);


-- 
Qualcomm Innovation Center, Inc. is a member of Code Aurora Forum,
a Linux Foundation Collaborative Project
_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel

Re: [RFC v3 5/8] drm/msm: update cursors asynchronously through atomic

[Daniel Vetter]

On Wed, May 17, 2017 at 10:56:25AM +0530, Archit Taneja wrote:
> Hi,
> 
> On 05/16/2017 08:14 PM, Archit Taneja wrote:
> > 
> > 
> > On 5/13/2017 12:40 AM, Gustavo Padovan wrote:
> > > From: Gustavo Padovan <gustavo.padovan@collabora.com>
> > > 
> > > Add support to async updates of cursors by using the new atomic
> > > interface for that. Basically what this commit does is do what
> > > mdp5_update_cursor_plane_legacy() did but through atomic.
> > 
> > Works well on DB820c (which has a APQ8096 SoC).
> > 
> > Tested-by: Archit Taneja <architt@codeaurora.org>
> 
> Actually, after some more thorough testing, I found one issue, mentioned below.
> 
> > 
> > > 
> > > v3: move size checks back to drivers (Ville Syrjälä)
> > > 
> > > v2: move fb setting to core and use new state (Eric Anholt)
> > > 
> > > Cc: Rob Clark <robdclark@gmail.com>
> > > Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.com>
> > > ---
> > >   drivers/gpu/drm/msm/mdp/mdp5/mdp5_plane.c | 151 +++++++++++++-----------------
> > >   1 file changed, 63 insertions(+), 88 deletions(-)
> > > 
> > > diff --git a/drivers/gpu/drm/msm/mdp/mdp5/mdp5_plane.c b/drivers/gpu/drm/msm/mdp/mdp5/mdp5_plane.c
> > > index a38c5fe..07106c1 100644
> > > --- a/drivers/gpu/drm/msm/mdp/mdp5/mdp5_plane.c
> > > +++ b/drivers/gpu/drm/msm/mdp/mdp5/mdp5_plane.c
> > > @@ -33,15 +33,6 @@ static int mdp5_plane_mode_set(struct drm_plane *plane,
> > >           struct drm_crtc *crtc, struct drm_framebuffer *fb,
> > >           struct drm_rect *src, struct drm_rect *dest);
> > >   -static int mdp5_update_cursor_plane_legacy(struct drm_plane *plane,
> > > -        struct drm_crtc *crtc,
> > > -        struct drm_framebuffer *fb,
> > > -        int crtc_x, int crtc_y,
> > > -        unsigned int crtc_w, unsigned int crtc_h,
> > > -        uint32_t src_x, uint32_t src_y,
> > > -        uint32_t src_w, uint32_t src_h,
> > > -        struct drm_modeset_acquire_ctx *ctx);
> > > -
> > >   static struct mdp5_kms *get_kms(struct drm_plane *plane)
> > >   {
> > >       struct msm_drm_private *priv = plane->dev->dev_private;
> > > @@ -257,7 +248,7 @@ static const struct drm_plane_funcs mdp5_plane_funcs = {
> > >   };
> > >     static const struct drm_plane_funcs mdp5_cursor_plane_funcs = {
> > > -        .update_plane = mdp5_update_cursor_plane_legacy,
> > > +        .update_plane = drm_atomic_helper_update_plane,
> > >           .disable_plane = drm_atomic_helper_disable_plane,
> > >           .destroy = mdp5_plane_destroy,
> > >           .set_property = drm_atomic_helper_plane_set_property,
> > > @@ -484,11 +475,73 @@ static void mdp5_plane_atomic_update(struct drm_plane *plane,
> > >       }
> > >   }
> > >   +static int mdp5_plane_atomic_async_check(struct drm_plane *plane,
> > > +                     struct drm_plane_state *state)
> > > +{
> > > +    struct mdp5_plane_state *mdp5_state = to_mdp5_plane_state(state);
> > > +    struct drm_crtc_state *crtc_state;
> > > +
> > > +    crtc_state = drm_atomic_get_existing_crtc_state(state->state,
> > > +                            state->crtc);
> 
> I see a kernel splat here (a NULL pointer dereference). The async_check
> function assumes that there is always going to be a plane_state->crtc
> available. This doesn't seem to be the case at least in the
> drm_atomic_helper_disable_plane() path. Moving the check to set
> legacy_cursor_update after calling __drm_atomic_helper_disable_plane()
> seems to fix the issue. Do you think it's a legit fix?

Yes, plane_state->crtc == NULL is what happens when disabling a plane. I
guess simplest would be to just not handle this for the async cursor
helpers.

I thought we've had tons of igts to test this ...

> One more point w.r.t msm driver is that we don't use the default
> drm_atomic_helper_commit() for our atomic_commit op. So I had to
> call drm_atomic_helper_async_commit() from our atomic_commit
> implementation
> (i.e, in msm_atomic_commit in drivers/gpu/drm/msm/msm_atomic.c)

Would be great to fix that - msm predates the nonblocking support in the
commit helper, but since this is fixed there's no reason anymore for
driver-private commit functions. Or at least there shouldn't be, for
almost all drivers. You can stuff all your hw commit logic into
atomic_commit_tail.
-Daniel
-- 
Daniel Vetter
Software Engineer, Intel Corporation
http://blog.ffwll.ch
_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel

Re: [RFC v3 5/8] drm/msm: update cursors asynchronously through atomic

[Archit Taneja]

On 05/17/2017 05:05 PM, Daniel Vetter wrote:
> On Wed, May 17, 2017 at 10:56:25AM +0530, Archit Taneja wrote:
>> Hi,
>>
>> On 05/16/2017 08:14 PM, Archit Taneja wrote:
>>>
>>>
>>> On 5/13/2017 12:40 AM, Gustavo Padovan wrote:
>>>> From: Gustavo Padovan <gustavo.padovan@collabora.com>
>>>>
>>>> Add support to async updates of cursors by using the new atomic
>>>> interface for that. Basically what this commit does is do what
>>>> mdp5_update_cursor_plane_legacy() did but through atomic.
>>>
>>> Works well on DB820c (which has a APQ8096 SoC).
>>>
>>> Tested-by: Archit Taneja <architt@codeaurora.org>
>>
>> Actually, after some more thorough testing, I found one issue, mentioned below.
>>
>>>
>>>>
>>>> v3: move size checks back to drivers (Ville Syrjälä)
>>>>
>>>> v2: move fb setting to core and use new state (Eric Anholt)
>>>>
>>>> Cc: Rob Clark <robdclark@gmail.com>
>>>> Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.com>
>>>> ---
>>>>   drivers/gpu/drm/msm/mdp/mdp5/mdp5_plane.c | 151 +++++++++++++-----------------
>>>>   1 file changed, 63 insertions(+), 88 deletions(-)
>>>>
>>>> diff --git a/drivers/gpu/drm/msm/mdp/mdp5/mdp5_plane.c b/drivers/gpu/drm/msm/mdp/mdp5/mdp5_plane.c
>>>> index a38c5fe..07106c1 100644
>>>> --- a/drivers/gpu/drm/msm/mdp/mdp5/mdp5_plane.c
>>>> +++ b/drivers/gpu/drm/msm/mdp/mdp5/mdp5_plane.c
>>>> @@ -33,15 +33,6 @@ static int mdp5_plane_mode_set(struct drm_plane *plane,
>>>>           struct drm_crtc *crtc, struct drm_framebuffer *fb,
>>>>           struct drm_rect *src, struct drm_rect *dest);
>>>>   -static int mdp5_update_cursor_plane_legacy(struct drm_plane *plane,
>>>> -        struct drm_crtc *crtc,
>>>> -        struct drm_framebuffer *fb,
>>>> -        int crtc_x, int crtc_y,
>>>> -        unsigned int crtc_w, unsigned int crtc_h,
>>>> -        uint32_t src_x, uint32_t src_y,
>>>> -        uint32_t src_w, uint32_t src_h,
>>>> -        struct drm_modeset_acquire_ctx *ctx);
>>>> -
>>>>   static struct mdp5_kms *get_kms(struct drm_plane *plane)
>>>>   {
>>>>       struct msm_drm_private *priv = plane->dev->dev_private;
>>>> @@ -257,7 +248,7 @@ static const struct drm_plane_funcs mdp5_plane_funcs = {
>>>>   };
>>>>     static const struct drm_plane_funcs mdp5_cursor_plane_funcs = {
>>>> -        .update_plane = mdp5_update_cursor_plane_legacy,
>>>> +        .update_plane = drm_atomic_helper_update_plane,
>>>>           .disable_plane = drm_atomic_helper_disable_plane,
>>>>           .destroy = mdp5_plane_destroy,
>>>>           .set_property = drm_atomic_helper_plane_set_property,
>>>> @@ -484,11 +475,73 @@ static void mdp5_plane_atomic_update(struct drm_plane *plane,
>>>>       }
>>>>   }
>>>>   +static int mdp5_plane_atomic_async_check(struct drm_plane *plane,
>>>> +                     struct drm_plane_state *state)
>>>> +{
>>>> +    struct mdp5_plane_state *mdp5_state = to_mdp5_plane_state(state);
>>>> +    struct drm_crtc_state *crtc_state;
>>>> +
>>>> +    crtc_state = drm_atomic_get_existing_crtc_state(state->state,
>>>> +                            state->crtc);
>>
>> I see a kernel splat here (a NULL pointer dereference). The async_check
>> function assumes that there is always going to be a plane_state->crtc
>> available. This doesn't seem to be the case at least in the
>> drm_atomic_helper_disable_plane() path. Moving the check to set
>> legacy_cursor_update after calling __drm_atomic_helper_disable_plane()
>> seems to fix the issue. Do you think it's a legit fix?
>
> Yes, plane_state->crtc == NULL is what happens when disabling a plane. I
> guess simplest would be to just not handle this for the async cursor
> helpers.

Okay. There is actually a check for (crtc != NULL) in drm_atomic_async_check().
The problem with it is that it is referring to the old plane state
(i.e plane->state->crtc) instead of the new plane state (i.e, plane_state->crtc).
Changing this fixes the issue without the need to touch
drm_atomic_helper_disable_plane().

>
> I thought we've had tons of igts to test this ...
>
>> One more point w.r.t msm driver is that we don't use the default
>> drm_atomic_helper_commit() for our atomic_commit op. So I had to
>> call drm_atomic_helper_async_commit() from our atomic_commit
>> implementation
>> (i.e, in msm_atomic_commit in drivers/gpu/drm/msm/msm_atomic.c)
>
> Would be great to fix that - msm predates the nonblocking support in the
> commit helper, but since this is fixed there's no reason anymore for
> driver-private commit functions. Or at least there shouldn't be, for
> almost all drivers. You can stuff all your hw commit logic into
> atomic_commit_tail.

Cool. I'll try to to convert to the commit helper funcs.

Thanks,
Archit

-- 
Qualcomm Innovation Center, Inc. is a member of Code Aurora Forum,
a Linux Foundation Collaborative Project
_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel

[RFC v3 6/8] drm/msm: remove mdp5_cursor_plane_funcs

[Gustavo Padovan]

From: Gustavo Padovan <gustavo.padovan@collabora.com>

After converting legacy cursor updates to atomic async commits
mdp5_cursor_plane_funcs just duplicates mdp5_plane_funcs now.

Cc: Rob Clark <robdclark@gmail.com>
Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.com>
---
 drivers/gpu/drm/msm/mdp/mdp5/mdp5_plane.c | 26 +++-----------------------
 1 file changed, 3 insertions(+), 23 deletions(-)

diff --git a/drivers/gpu/drm/msm/mdp/mdp5/mdp5_plane.c b/drivers/gpu/drm/msm/mdp/mdp5/mdp5_plane.c
index 07106c1..794ca07 100644
--- a/drivers/gpu/drm/msm/mdp/mdp5/mdp5_plane.c
+++ b/drivers/gpu/drm/msm/mdp/mdp5/mdp5_plane.c
@@ -247,19 +247,6 @@ static const struct drm_plane_funcs mdp5_plane_funcs = {
 		.atomic_print_state = mdp5_plane_atomic_print_state,
 };
 
-static const struct drm_plane_funcs mdp5_cursor_plane_funcs = {
-		.update_plane = drm_atomic_helper_update_plane,
-		.disable_plane = drm_atomic_helper_disable_plane,
-		.destroy = mdp5_plane_destroy,
-		.set_property = drm_atomic_helper_plane_set_property,
-		.atomic_set_property = mdp5_plane_atomic_set_property,
-		.atomic_get_property = mdp5_plane_atomic_get_property,
-		.reset = mdp5_plane_reset,
-		.atomic_duplicate_state = mdp5_plane_duplicate_state,
-		.atomic_destroy_state = mdp5_plane_destroy_state,
-		.atomic_print_state = mdp5_plane_atomic_print_state,
-};
-
 static int mdp5_plane_prepare_fb(struct drm_plane *plane,
 				 struct drm_plane_state *new_state)
 {
@@ -1111,16 +1098,9 @@ struct drm_plane *mdp5_plane_init(struct drm_device *dev,
 
 	spin_lock_init(&mdp5_plane->pipe_lock);
 
-	if (type == DRM_PLANE_TYPE_CURSOR)
-		ret = drm_universal_plane_init(dev, plane, 0xff,
-				&mdp5_cursor_plane_funcs,
-				mdp5_plane->formats, mdp5_plane->nformats,
-				type, NULL);
-	else
-		ret = drm_universal_plane_init(dev, plane, 0xff,
-				&mdp5_plane_funcs,
-				mdp5_plane->formats, mdp5_plane->nformats,
-				type, NULL);
+	ret = drm_universal_plane_init(dev, plane, 0xff, &mdp5_plane_funcs,
+				       mdp5_plane->formats,
+				       mdp5_plane->nformats, type, NULL);
 	if (ret)
 		goto fail;
 
-- 
2.9.3

_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel

Re: [RFC v3 6/8] drm/msm: remove mdp5_cursor_plane_funcs

[Archit Taneja]

On 5/13/2017 12:40 AM, Gustavo Padovan wrote:
> From: Gustavo Padovan <gustavo.padovan@collabora.com>
> 
> After converting legacy cursor updates to atomic async commits
> mdp5_cursor_plane_funcs just duplicates mdp5_plane_funcs now.

Tested-by: Archit Taneja <architt@codeaurora.org>

Thanks,
Archit

> 
> Cc: Rob Clark <robdclark@gmail.com>
> Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.com>
> ---
>   drivers/gpu/drm/msm/mdp/mdp5/mdp5_plane.c | 26 +++-----------------------
>   1 file changed, 3 insertions(+), 23 deletions(-)
> 
> diff --git a/drivers/gpu/drm/msm/mdp/mdp5/mdp5_plane.c b/drivers/gpu/drm/msm/mdp/mdp5/mdp5_plane.c
> index 07106c1..794ca07 100644
> --- a/drivers/gpu/drm/msm/mdp/mdp5/mdp5_plane.c
> +++ b/drivers/gpu/drm/msm/mdp/mdp5/mdp5_plane.c
> @@ -247,19 +247,6 @@ static const struct drm_plane_funcs mdp5_plane_funcs = {
>   		.atomic_print_state = mdp5_plane_atomic_print_state,
>   };
>   
> -static const struct drm_plane_funcs mdp5_cursor_plane_funcs = {
> -		.update_plane = drm_atomic_helper_update_plane,
> -		.disable_plane = drm_atomic_helper_disable_plane,
> -		.destroy = mdp5_plane_destroy,
> -		.set_property = drm_atomic_helper_plane_set_property,
> -		.atomic_set_property = mdp5_plane_atomic_set_property,
> -		.atomic_get_property = mdp5_plane_atomic_get_property,
> -		.reset = mdp5_plane_reset,
> -		.atomic_duplicate_state = mdp5_plane_duplicate_state,
> -		.atomic_destroy_state = mdp5_plane_destroy_state,
> -		.atomic_print_state = mdp5_plane_atomic_print_state,
> -};
> -
>   static int mdp5_plane_prepare_fb(struct drm_plane *plane,
>   				 struct drm_plane_state *new_state)
>   {
> @@ -1111,16 +1098,9 @@ struct drm_plane *mdp5_plane_init(struct drm_device *dev,
>   
>   	spin_lock_init(&mdp5_plane->pipe_lock);
>   
> -	if (type == DRM_PLANE_TYPE_CURSOR)
> -		ret = drm_universal_plane_init(dev, plane, 0xff,
> -				&mdp5_cursor_plane_funcs,
> -				mdp5_plane->formats, mdp5_plane->nformats,
> -				type, NULL);
> -	else
> -		ret = drm_universal_plane_init(dev, plane, 0xff,
> -				&mdp5_plane_funcs,
> -				mdp5_plane->formats, mdp5_plane->nformats,
> -				type, NULL);
> +	ret = drm_universal_plane_init(dev, plane, 0xff, &mdp5_plane_funcs,
> +				       mdp5_plane->formats,
> +				       mdp5_plane->nformats, type, NULL);
>   	if (ret)
>   		goto fail;
>   
> 

-- 
The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum,
hosted by The Linux Foundation
_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel

[RFC v3 7/8] drm/vc4: update cursors asynchronously through atomic

[Gustavo Padovan]

From: Gustavo Padovan <gustavo.padovan@collabora.com>

Add support to async updates of cursors by using the new atomic
interface for that. Basically what this commit does is do what
vc4_update_plane() did but through atomic.

v3: move size checks back to drivers (Ville Syrjälä)

v2: move fb setting to core and use new state (Eric Anholt)

Cc: Eric Anholt <eric@anholt.net>
Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.com>
---
 drivers/gpu/drm/vc4/vc4_plane.c | 99 +++++++++++++++--------------------------
 1 file changed, 35 insertions(+), 64 deletions(-)

diff --git a/drivers/gpu/drm/vc4/vc4_plane.c b/drivers/gpu/drm/vc4/vc4_plane.c
index d34cd53..05e9f5f 100644
--- a/drivers/gpu/drm/vc4/vc4_plane.c
+++ b/drivers/gpu/drm/vc4/vc4_plane.c
@@ -735,70 +735,38 @@ void vc4_plane_async_set_fb(struct drm_plane *plane, struct drm_framebuffer *fb)
 	vc4_state->dlist[vc4_state->ptr0_offset] = addr;
 }
 
-static const struct drm_plane_helper_funcs vc4_plane_helper_funcs = {
-	.atomic_check = vc4_plane_atomic_check,
-	.atomic_update = vc4_plane_atomic_update,
-};
-
-static void vc4_plane_destroy(struct drm_plane *plane)
-{
-	drm_plane_helper_disable(plane);
-	drm_plane_cleanup(plane);
-}
-
-/* Implements immediate (non-vblank-synced) updates of the cursor
- * position, or falls back to the atomic helper otherwise.
- */
-static int
-vc4_update_plane(struct drm_plane *plane,
-		 struct drm_crtc *crtc,
-		 struct drm_framebuffer *fb,
-		 int crtc_x, int crtc_y,
-		 unsigned int crtc_w, unsigned int crtc_h,
-		 uint32_t src_x, uint32_t src_y,
-		 uint32_t src_w, uint32_t src_h,
-		 struct drm_modeset_acquire_ctx *ctx)
+static int vc4_plane_atomic_async_check(struct drm_plane *plane,
+					struct drm_plane_state *state)
 {
-	struct drm_plane_state *plane_state;
-	struct vc4_plane_state *vc4_state;
-
-	if (plane != crtc->cursor)
-		goto out;
-
-	plane_state = plane->state;
-	vc4_state = to_vc4_plane_state(plane_state);
+	if (plane != state->crtc->cursor)
+		return -EINVAL;
 
-	if (!plane_state)
-		goto out;
+	if (!plane->state)
+		return -EINVAL;
 
 	/* No configuring new scaling in the fast path. */
-	if (crtc_w != plane_state->crtc_w ||
-	    crtc_h != plane_state->crtc_h ||
-	    src_w != plane_state->src_w ||
-	    src_h != plane_state->src_h) {
-		goto out;
+	if (state->crtc_w != plane->state->crtc_w ||
+	    state->crtc_h != plane->state->crtc_h ||
+	    state->src_w != plane->state->src_w ||
+	    state->src_h != plane->state->src_h) {
+		return -EINVAL;
 	}
 
-	if (fb != plane_state->fb) {
-		drm_atomic_set_fb_for_plane(plane->state, fb);
-		vc4_plane_async_set_fb(plane, fb);
-	}
+	return 0;
+}
 
-	/* Set the cursor's position on the screen.  This is the
-	 * expected change from the drm_mode_cursor_universal()
-	 * helper.
-	 */
-	plane_state->crtc_x = crtc_x;
-	plane_state->crtc_y = crtc_y;
+static void vc4_plane_atomic_async_update(struct drm_plane *plane,
+					  struct drm_plane_state *new_state)
+{
+	struct vc4_plane_state *vc4_state = to_vc4_plane_state(plane->state);
 
-	/* Allow changing the start position within the cursor BO, if
-	 * that matters.
-	 */
-	plane_state->src_x = src_x;
-	plane_state->src_y = src_y;
+	plane->state->src_x = new_state->src_x;
+	plane->state->src_y = new_state->src_y;
+	plane->state->crtc_x = new_state->crtc_x;
+	plane->state->crtc_y = new_state->crtc_y;
 
-	/* Update the display list based on the new crtc_x/y. */
-	vc4_plane_atomic_check(plane, plane_state);
+	if (plane->state->fb != new_state->fb)
+		vc4_plane_async_set_fb(plane, new_state->fb);
 
 	/* Note that we can't just call vc4_plane_write_dlist()
 	 * because that would smash the context data that the HVS is
@@ -810,20 +778,23 @@ vc4_update_plane(struct drm_plane *plane,
 	       &vc4_state->hw_dlist[vc4_state->pos2_offset]);
 	writel(vc4_state->dlist[vc4_state->ptr0_offset],
 	       &vc4_state->hw_dlist[vc4_state->ptr0_offset]);
+}
 
-	return 0;
+static const struct drm_plane_helper_funcs vc4_plane_helper_funcs = {
+	.atomic_check = vc4_plane_atomic_check,
+	.atomic_update = vc4_plane_atomic_update,
+	.atomic_async_check = vc4_plane_atomic_async_check,
+	.atomic_async_update = vc4_plane_atomic_async_update,
+};
 
-out:
-	return drm_atomic_helper_update_plane(plane, crtc, fb,
-					      crtc_x, crtc_y,
-					      crtc_w, crtc_h,
-					      src_x, src_y,
-					      src_w, src_h,
-					      ctx);
+static void vc4_plane_destroy(struct drm_plane *plane)
+{
+	drm_plane_helper_disable(plane);
+	drm_plane_cleanup(plane);
 }
 
 static const struct drm_plane_funcs vc4_plane_funcs = {
-	.update_plane = vc4_update_plane,
+	.update_plane = drm_atomic_helper_update_plane,
 	.disable_plane = drm_atomic_helper_disable_plane,
 	.destroy = vc4_plane_destroy,
 	.set_property = NULL,
-- 
2.9.3

_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel

Re: [RFC v3 7/8] drm/vc4: update cursors asynchronously through atomic

[Robert Foss]

Hey,

I just tested this patch on a RPi2, and the cursor behaves correctly with no 
unexpected errors.

Tested-by: Robert Foss <robert.foss@collabora.com>

On 2017-05-12 03:10 PM, Gustavo Padovan wrote:
> From: Gustavo Padovan <gustavo.padovan@collabora.com>
> 
> Add support to async updates of cursors by using the new atomic
> interface for that. Basically what this commit does is do what
> vc4_update_plane() did but through atomic.
> 
> v3: move size checks back to drivers (Ville Syrjälä)
> 
> v2: move fb setting to core and use new state (Eric Anholt)
> 
> Cc: Eric Anholt <eric@anholt.net>
> Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.com>
> ---
>   drivers/gpu/drm/vc4/vc4_plane.c | 99 +++++++++++++++--------------------------
>   1 file changed, 35 insertions(+), 64 deletions(-)
> 
> diff --git a/drivers/gpu/drm/vc4/vc4_plane.c b/drivers/gpu/drm/vc4/vc4_plane.c
> index d34cd53..05e9f5f 100644
> --- a/drivers/gpu/drm/vc4/vc4_plane.c
> +++ b/drivers/gpu/drm/vc4/vc4_plane.c
> @@ -735,70 +735,38 @@ void vc4_plane_async_set_fb(struct drm_plane *plane, struct drm_framebuffer *fb)
>   	vc4_state->dlist[vc4_state->ptr0_offset] = addr;
>   }
>   
> -static const struct drm_plane_helper_funcs vc4_plane_helper_funcs = {
> -	.atomic_check = vc4_plane_atomic_check,
> -	.atomic_update = vc4_plane_atomic_update,
> -};
> -
> -static void vc4_plane_destroy(struct drm_plane *plane)
> -{
> -	drm_plane_helper_disable(plane);
> -	drm_plane_cleanup(plane);
> -}
> -
> -/* Implements immediate (non-vblank-synced) updates of the cursor
> - * position, or falls back to the atomic helper otherwise.
> - */
> -static int
> -vc4_update_plane(struct drm_plane *plane,
> -		 struct drm_crtc *crtc,
> -		 struct drm_framebuffer *fb,
> -		 int crtc_x, int crtc_y,
> -		 unsigned int crtc_w, unsigned int crtc_h,
> -		 uint32_t src_x, uint32_t src_y,
> -		 uint32_t src_w, uint32_t src_h,
> -		 struct drm_modeset_acquire_ctx *ctx)
> +static int vc4_plane_atomic_async_check(struct drm_plane *plane,
> +					struct drm_plane_state *state)
>   {
> -	struct drm_plane_state *plane_state;
> -	struct vc4_plane_state *vc4_state;
> -
> -	if (plane != crtc->cursor)
> -		goto out;
> -
> -	plane_state = plane->state;
> -	vc4_state = to_vc4_plane_state(plane_state);
> +	if (plane != state->crtc->cursor)
> +		return -EINVAL;
>   
> -	if (!plane_state)
> -		goto out;
> +	if (!plane->state)
> +		return -EINVAL;
>   
>   	/* No configuring new scaling in the fast path. */
> -	if (crtc_w != plane_state->crtc_w ||
> -	    crtc_h != plane_state->crtc_h ||
> -	    src_w != plane_state->src_w ||
> -	    src_h != plane_state->src_h) {
> -		goto out;
> +	if (state->crtc_w != plane->state->crtc_w ||
> +	    state->crtc_h != plane->state->crtc_h ||
> +	    state->src_w != plane->state->src_w ||
> +	    state->src_h != plane->state->src_h) {
> +		return -EINVAL;
>   	}
>   
> -	if (fb != plane_state->fb) {
> -		drm_atomic_set_fb_for_plane(plane->state, fb);
> -		vc4_plane_async_set_fb(plane, fb);
> -	}
> +	return 0;
> +}
>   
> -	/* Set the cursor's position on the screen.  This is the
> -	 * expected change from the drm_mode_cursor_universal()
> -	 * helper.
> -	 */
> -	plane_state->crtc_x = crtc_x;
> -	plane_state->crtc_y = crtc_y;
> +static void vc4_plane_atomic_async_update(struct drm_plane *plane,
> +					  struct drm_plane_state *new_state)
> +{
> +	struct vc4_plane_state *vc4_state = to_vc4_plane_state(plane->state);
>   
> -	/* Allow changing the start position within the cursor BO, if
> -	 * that matters.
> -	 */
> -	plane_state->src_x = src_x;
> -	plane_state->src_y = src_y;
> +	plane->state->src_x = new_state->src_x;
> +	plane->state->src_y = new_state->src_y;
> +	plane->state->crtc_x = new_state->crtc_x;
> +	plane->state->crtc_y = new_state->crtc_y;
>   
> -	/* Update the display list based on the new crtc_x/y. */
> -	vc4_plane_atomic_check(plane, plane_state);
> +	if (plane->state->fb != new_state->fb)
> +		vc4_plane_async_set_fb(plane, new_state->fb);
>   
>   	/* Note that we can't just call vc4_plane_write_dlist()
>   	 * because that would smash the context data that the HVS is
> @@ -810,20 +778,23 @@ vc4_update_plane(struct drm_plane *plane,
>   	       &vc4_state->hw_dlist[vc4_state->pos2_offset]);
>   	writel(vc4_state->dlist[vc4_state->ptr0_offset],
>   	       &vc4_state->hw_dlist[vc4_state->ptr0_offset]);
> +}
>   
> -	return 0;
> +static const struct drm_plane_helper_funcs vc4_plane_helper_funcs = {
> +	.atomic_check = vc4_plane_atomic_check,
> +	.atomic_update = vc4_plane_atomic_update,
> +	.atomic_async_check = vc4_plane_atomic_async_check,
> +	.atomic_async_update = vc4_plane_atomic_async_update,
> +};
>   
> -out:
> -	return drm_atomic_helper_update_plane(plane, crtc, fb,
> -					      crtc_x, crtc_y,
> -					      crtc_w, crtc_h,
> -					      src_x, src_y,
> -					      src_w, src_h,
> -					      ctx);
> +static void vc4_plane_destroy(struct drm_plane *plane)
> +{
> +	drm_plane_helper_disable(plane);
> +	drm_plane_cleanup(plane);
>   }
>   
>   static const struct drm_plane_funcs vc4_plane_funcs = {
> -	.update_plane = vc4_update_plane,
> +	.update_plane = drm_atomic_helper_update_plane,
>   	.disable_plane = drm_atomic_helper_disable_plane,
>   	.destroy = vc4_plane_destroy,
>   	.set_property = NULL,
> 
_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel

[RFC v3 8/8] drm/atomic: add ASYNC_UPDATE flag to the Atomic IOCTL

[Gustavo Padovan]

From: Gustavo Padovan <gustavo.padovan@collabora.com>

This flag tells core to jump ahead the queued update if the conditions in
drm_atomic_async_check() are met. That means we are only able to do an
async update if no modeset is pending and update for the same plane is not
queued.

It uses the already in place infrastructure for async updates.

It is useful for cursor updates and async PageFlips over the atomic
ioctl, otherwise in some cases updates may be delayed to the point the user
will notice it.

DRM_MODE_ATOMIC_ASYNC_UPDATE should be passed to the Atomic IOCTL to use
this feature.

Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.com>
---
 drivers/gpu/drm/drm_atomic.c | 8 +++++++-
 include/uapi/drm/drm_mode.h  | 4 +++-
 2 files changed, 10 insertions(+), 2 deletions(-)

diff --git a/drivers/gpu/drm/drm_atomic.c b/drivers/gpu/drm/drm_atomic.c
index 259a758..304dd0a 100644
--- a/drivers/gpu/drm/drm_atomic.c
+++ b/drivers/gpu/drm/drm_atomic.c
@@ -77,6 +77,7 @@ drm_atomic_state_init(struct drm_device *dev, struct drm_atomic_state *state)
 	 * setting this appropriately?
 	 */
 	state->allow_modeset = true;
+	state->async_update = true;
 
 	state->crtcs = kcalloc(dev->mode_config.num_crtc,
 			       sizeof(*state->crtcs), GFP_KERNEL);
@@ -1653,7 +1654,7 @@ int drm_atomic_check_only(struct drm_atomic_state *state)
 		}
 	}
 
-	if (state->legacy_cursor_update)
+	if (state->async_update || state->legacy_cursor_update)
 		state->async_update = drm_atomic_async_check(state);
 
 	return ret;
@@ -2189,6 +2190,10 @@ int drm_mode_atomic_ioctl(struct drm_device *dev,
 			(arg->flags & DRM_MODE_PAGE_FLIP_EVENT))
 		return -EINVAL;
 
+	if ((arg->flags & DRM_MODE_ATOMIC_ALLOW_MODESET) &&
+			(arg->flags & DRM_MODE_ATOMIC_ASYNC_UPDATE))
+		return -EINVAL;
+
 	drm_modeset_acquire_init(&ctx, 0);
 
 	state = drm_atomic_state_alloc(dev);
@@ -2197,6 +2202,7 @@ int drm_mode_atomic_ioctl(struct drm_device *dev,
 
 	state->acquire_ctx = &ctx;
 	state->allow_modeset = !!(arg->flags & DRM_MODE_ATOMIC_ALLOW_MODESET);
+	state->async_update = !!(arg->flags & DRM_MODE_ATOMIC_ASYNC_UPDATE);
 
 retry:
 	plane_mask = 0;
diff --git a/include/uapi/drm/drm_mode.h b/include/uapi/drm/drm_mode.h
index 8c67fc0..7c067ca 100644
--- a/include/uapi/drm/drm_mode.h
+++ b/include/uapi/drm/drm_mode.h
@@ -646,13 +646,15 @@ struct drm_mode_destroy_dumb {
 #define DRM_MODE_ATOMIC_TEST_ONLY 0x0100
 #define DRM_MODE_ATOMIC_NONBLOCK  0x0200
 #define DRM_MODE_ATOMIC_ALLOW_MODESET 0x0400
+#define DRM_MODE_ATOMIC_ASYNC_UPDATE 0x0800
 
 #define DRM_MODE_ATOMIC_FLAGS (\
 		DRM_MODE_PAGE_FLIP_EVENT |\
 		DRM_MODE_PAGE_FLIP_ASYNC |\
 		DRM_MODE_ATOMIC_TEST_ONLY |\
 		DRM_MODE_ATOMIC_NONBLOCK |\
-		DRM_MODE_ATOMIC_ALLOW_MODESET)
+		DRM_MODE_ATOMIC_ALLOW_MODESET |\
+		DRM_MODE_ATOMIC_ASYNC_UPDATE)
 
 struct drm_mode_atomic {
 	__u32 flags;
-- 
2.9.3

_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel