Re: [PATCH 3/3] drm/panel: Add Novatek NT36532 panel driver

[曹俊杰 <caojunjie650@gmail.com>]

Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com> 于2025年10月2日周四 10:05写道：
>On Wed, Oct 01, 2025 at 09:59:14PM +0800, Junjie Cao wrote:
>> Add a driver for panels using the Novatek NT36532 Display Driver IC,
>> including support for the CSOT PPC100HB1-1, found in the OnePlus Pad 2
>> tablets.
>>
>> Signed-off-by: Junjie Cao <caojunjie650@gmail.com>
>> ---
>>  MAINTAINERS                                   |   7 +
>>  drivers/gpu/drm/panel/Kconfig                 |  10 +
>>  drivers/gpu/drm/panel/Makefile                |   1 +
>>  drivers/gpu/drm/panel/panel-novatek-nt36532.c | 437 ++++++++++++++++++
>>  4 files changed, 455 insertions(+)
>>  create mode 100644 drivers/gpu/drm/panel/panel-novatek-nt36532.c
>>
>> +
>> +static const struct panel_info csot_panel_info = {
>> +     .width_mm = 250,
>> +     .height_mm = 177,
>> +     .lanes = 4,
>> +     .format = MIPI_DSI_FMT_RGB888,
>> +     .mode_flags = MIPI_DSI_MODE_VIDEO | MIPI_DSI_CLOCK_NON_CONTINUOUS |
>> +                   MIPI_DSI_MODE_LPM,
>> +     .display_mode = csot_display_mode,
>> +     .dsc_slice_per_pkt = 2,
>
>As this is not a part of the standard, what if the DSI host doesn't
>support this feature?
>

Without it, parameters will not be calculated correctly, garbled then.

>> +     .dsc_cfg = &csot_dsc_cfg,
>> +     .init_sequence = csot_init_sequence,
>> +     .is_dual_dsi = true,
>> +};
>> +
>
>--
>With best wishes
>Dmitry

Regards,
Junjie