Re: [PATCH 4/4 v2] drm/bridge: adv7511: Initialize audio packet on adv7533

[John Stultz <john.stultz@linaro.org>]

On Fri, Sep 2, 2016 at 2:49 AM, Archit Taneja <architt@codeaurora.org> wrote:
> Hi,
>
>
> On 8/30/2016 5:11 AM, John Stultz wrote:
>>
>> From: Andy Green <andy.green@linaro.org>
>>
>> Set the initial audio packet settings to allow the audio
>> driver to work.
>>
>> Cc: David Airlie <airlied@linux.ie>
>> Cc: Archit Taneja <architt@codeaurora.org>
>> Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
>> Cc: Wolfram Sang <wsa+renesas@sang-engineering.com>
>> Cc: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
>> Cc: "Ville Syrjälä" <ville.syrjala@linux.intel.com>
>> Cc: Boris Brezillon <boris.brezillon@free-electrons.com>
>> Cc: Andy Green <andy@warmcat.com>
>> Cc: Dave Long <dave.long@linaro.org>
>> Cc: Guodong Xu <guodong.xu@linaro.org>
>> Cc: Zhangfei Gao <zhangfei.gao@linaro.org>
>> Cc: Mark Brown <broonie@kernel.org>
>> Cc: Lars-Peter Clausen <lars@metafoo.de>
>> Cc: Jose Abreu <joabreu@synopsys.com>
>> Cc: dri-devel@lists.freedesktop.org
>> Signed-off-by: Andy Green <andy.green@linaro.org>
>> [jstultz: Forward ported to mainline, changed to use register
>>   names rather then hex values, and removed config values set by
>>   audio driver.]
>> Signed-off-by: John Stultz <john.stultz@linaro.org>
>> ---
>>   drivers/gpu/drm/bridge/adv7511/adv7533.c | 22 ++++++++++++++++++++++
>>   1 file changed, 22 insertions(+)
>>
>> diff --git a/drivers/gpu/drm/bridge/adv7511/adv7533.c
>> b/drivers/gpu/drm/bridge/adv7511/adv7533.c
>> index 6798ecf..cced7c9 100644
>> --- a/drivers/gpu/drm/bridge/adv7511/adv7533.c
>> +++ b/drivers/gpu/drm/bridge/adv7511/adv7533.c
>> @@ -104,6 +104,28 @@ void adv7533_dsi_power_on(struct adv7511 *adv)
>>         /* disable test mode */
>>         regmap_write(adv->regmap_cec, 0x55, 0x00);
>>
>> +       /* hide Audio infoframe updates */
>> +       regmap_update_bits(adv->regmap, ADV7511_REG_INFOFRAME_UPDATE,
>> +                               BIT(5), BIT(5));
>> +       /* enable N/CTS, enable Audio sample packets */
>> +       regmap_update_bits(adv->regmap, ADV7511_REG_PACKET_ENABLE1,
>> +                               BIT(5), BIT(5));
>> +       /* enable N/CTS */
>> +       regmap_update_bits(adv->regmap, ADV7511_REG_PACKET_ENABLE1,
>> +                               BIT(6), BIT(6));
>> +       /* not copyrighted */
>> +       regmap_update_bits(adv->regmap, ADV7511_REG_AUDIO_CFG1,
>> +                               BIT(5), BIT(5));
>> +       /* enable audio infoframes */
>> +       regmap_update_bits(adv->regmap, ADV7511_REG_PACKET_ENABLE1,
>> +                               BIT(3), BIT(3));
>> +       /* AV mute disable */
>> +       regmap_update_bits(adv->regmap, ADV7511_REG_GC(0),
>> +                               BIT(7) | BIT(6), BIT(7));
>> +       /* use Audio infoframe updated info */
>> +       regmap_update_bits(adv->regmap, ADV7511_REG_GC(1),
>> +                               BIT(5), 0);
>> +
>
>
> Wouldn't these writes be needed by ADV751x chips too? These seem to
> belong to the main ADV75xx regmap. These should probably be a separate func
> in adv7511_audio.c or adv7511_drv.c, and it should be called in
> adv7511_power_on, so that ADV751x chips can utilize this too.

Yea. It seems like folding this into the audio_startup() function is
the best thing here, so I've done so and it seems to be working well.
Will resend here shortly.

thanks
-john