From: "Alexandre Courbot" <acourbot@nvidia.com>
To: "Gary Guo" <gary@garyguo.net>
Cc: "Danilo Krummrich" <dakr@kernel.org>,
"Alice Ryhl" <aliceryhl@google.com>,
"Daniel Almeida" <daniel.almeida@collabora.com>,
"Miguel Ojeda" <ojeda@kernel.org>,
"Boqun Feng" <boqun@kernel.org>,
"Björn Roy Baron" <bjorn3_gh@protonmail.com>,
"Benno Lossin" <lossin@kernel.org>,
"Andreas Hindborg" <a.hindborg@kernel.org>,
"Trevor Gross" <tmgross@umich.edu>,
"Tamir Duberstein" <tamird@kernel.org>,
"Onur Özkan" <work@onurozkan.dev>,
"David Airlie" <airlied@gmail.com>,
"Simona Vetter" <simona@ffwll.ch>,
"Bjorn Helgaas" <bhelgaas@google.com>,
"Krzysztof Wilczyński" <kwilczynski@kernel.org>,
driver-core@lists.linux.dev, rust-for-linux@vger.kernel.org,
linux-kernel@vger.kernel.org, nova-gpu@lists.linux.dev,
dri-devel@lists.freedesktop.org, linux-pci@vger.kernel.org
Subject: Re: [PATCH v3 12/16] gpu: nova-core: use projection for PFALCON and PFALCON2 registers
Date: Fri, 28 Aug 2026 10:04:37 +0900 [thread overview]
Message-ID: <DL068LFDXPM1.7A1482C1UJF@nvidia.com> (raw)
In-Reply-To: <20260819-typed_register-v3-12-3699a75fadf1@garyguo.net>
On Wed Aug 19, 2026 at 8:09 PM JST, Gary Guo wrote:
> Add fixed size region types `PFalconRegisters` and `PFalcon2Registers` and
> update PFALCON and PFALCON2 registers to be fixed register on them and not
> relative registers on `NovaRegisters`.
>
> Update `Falcon` struct to store projected views when constructing and
> access with `self.pfalcon` and `self.pfalcon2`.
>
> Signed-off-by: Gary Guo <gary@garyguo.net>
Reviewed-by: Alexandre Courbot <acourbot@nvidia.com>
> ---
> drivers/gpu/nova-core/falcon.rs | 157 +++++++++------------
> drivers/gpu/nova-core/falcon/fsp.rs | 63 +++++----
> drivers/gpu/nova-core/falcon/gsp.rs | 51 ++++---
> drivers/gpu/nova-core/falcon/hal/ga102.rs | 62 ++++----
> drivers/gpu/nova-core/falcon/hal/tu102.rs | 9 +-
> drivers/gpu/nova-core/falcon/sec2.rs | 37 +++--
> drivers/gpu/nova-core/firmware/fwsec/bootloader.rs | 18 +--
> drivers/gpu/nova-core/gsp/hal/tu102.rs | 7 +-
> drivers/gpu/nova-core/regs.rs | 92 ++++++------
> 9 files changed, 238 insertions(+), 258 deletions(-)
>
> diff --git a/drivers/gpu/nova-core/falcon.rs b/drivers/gpu/nova-core/falcon.rs
> index 65cb12d26e2b..119d305e2ea3 100644
> --- a/drivers/gpu/nova-core/falcon.rs
> +++ b/drivers/gpu/nova-core/falcon.rs
> @@ -14,13 +14,12 @@
> io::{
> io_project,
> poll::read_poll_timeout,
> - register::{
> - RegisterBase,
> - WithBase, //
> - },
> + register::Array,
> Io,
> + Mmio, //
> },
> prelude::*,
> + sizes::SZ_4K,
> time::Delta,
> };
>
> @@ -165,18 +164,22 @@ pub(crate) enum FalconFbifMemType with From<Bounded<u32, 1>> {
> }
> }
>
> -/// Type used to represent the `PFALCON` registers address base for a given falcon engine.
> -pub(crate) struct PFalconBase(());
> +/// Type used to represent the `PFALCON` registers.
> +#[repr(align(4))]
> +#[derive(FromBytes, IntoBytes)]
> +pub(crate) struct PFalconRegisters([u8; SZ_4K]);
>
> -/// Type used to represent the `PFALCON2` registers address base for a given falcon engine.
> -pub(crate) struct PFalcon2Base(());
> +/// Type used to represent the `PFALCON2` registers.
> +#[repr(align(4))]
> +#[derive(FromBytes, IntoBytes)]
> +pub(crate) struct PFalcon2Registers([u8; SZ_4K]);
>
> /// Trait defining the parameters of a given Falcon engine.
> ///
> /// Each engine provides one base for `PFALCON` and `PFALCON2` registers.
> -pub(crate) trait FalconEngine:
> - Send + Sync + RegisterBase<PFalconBase> + RegisterBase<PFalcon2Base> + Sized
> -{
> +pub(crate) trait FalconEngine: Send + Sync + Sized {
> + fn pfalcon(io: Bar0<'_>) -> Mmio<'_, PFalconRegisters>;
> + fn pfalcon2(io: Bar0<'_>) -> Mmio<'_, PFalcon2Registers>;
> }
>
> /// Represents a portion of the firmware to be loaded into a particular memory (e.g. IMEM or DMEM)
> @@ -358,6 +361,8 @@ pub(crate) struct Falcon<'a, E: FalconEngine> {
> hal: KBox<dyn FalconHal<E>>,
> dev: &'a device::Device<device::Bound>,
> bar: Bar0<'a>,
> + pub(crate) pfalcon: Mmio<'a, PFalconRegisters>,
The only spot that accesses this outside of the `falcon` module is
`FwsecFirmwareWithBl`, and only for the GSP falcon. I guess we need
some sort of `configure_dma_transfer` method to `Falcon<Gsp>` that
`FwsecFirmwareWithBl` will call, so we can keep this private.
Actually I that reminded me that Antonin ran into the same issue with
his series [1], so that's a logical abstraction to have regardless.
Since we're going to do it, can you just add a `// TODO: make private`
item so we don't lose track of it? Then I'll work with Antonin to add
the method and make this private after this patchset is merged.
[1] https://lore.kernel.org/all/20260826-b4-extract-pfsp-registers-to-falcon-mod-v1-4-38351df09084@nanonej.com/
<...>
> diff --git a/drivers/gpu/nova-core/falcon/hal/ga102.rs b/drivers/gpu/nova-core/falcon/hal/ga102.rs
> index 7600ee07ca2e..7880c145f8f7 100644
> --- a/drivers/gpu/nova-core/falcon/hal/ga102.rs
> +++ b/drivers/gpu/nova-core/falcon/hal/ga102.rs
> @@ -6,11 +6,9 @@
> device,
> io::{
> poll::read_poll_timeout,
> - register::{
> - Array,
> - WithBase, //
> - },
> - Io, //
> + register::Array,
> + Io,
> + Mmio, //
> },
> prelude::*,
> time::Delta, //
> @@ -24,6 +22,7 @@
> FalconBromParams,
> FalconEngine,
> FalconModSelAlgo,
> + PFalcon2Registers,
> PeregrineCoreSelect, //
> },
> regs,
> @@ -31,17 +30,16 @@
>
> use super::FalconHal;
>
> -fn select_core_ga102<E: FalconEngine>(bar: Bar0<'_>) -> Result {
> - let bcr_ctrl = bar.read(regs::NV_PRISCV_RISCV_BCR_CTRL::of::<E>());
> +fn select_core_ga102(pfalcon2: Mmio<'_, PFalcon2Registers>) -> Result {
> + let bcr_ctrl = pfalcon2.read(regs::NV_PRISCV_RISCV_BCR_CTRL);
> if bcr_ctrl.core_select() != PeregrineCoreSelect::Falcon {
> - bar.write(
> - WithBase::of::<E>(),
> + pfalcon2.write_reg(
> regs::NV_PRISCV_RISCV_BCR_CTRL::zeroed().with_core_select(PeregrineCoreSelect::Falcon),
> );
>
> // TIMEOUT: falcon core should take less than 10ms to report being enabled.
> read_poll_timeout(
> - || Ok(bar.read(regs::NV_PRISCV_RISCV_BCR_CTRL::of::<E>())),
> + || Ok(pfalcon2.read(regs::NV_PRISCV_RISCV_BCR_CTRL)),
> |r| r.valid(),
> Delta::ZERO,
> Delta::from_millis(10),
> @@ -86,24 +84,23 @@ fn signature_reg_fuse_version_ga102(
> Ok(u16::BITS - reg_fuse_version.leading_zeros())
> }
>
> -fn program_brom_ga102<E: FalconEngine>(bar: Bar0<'_>, params: &FalconBromParams) {
> - bar.write(
> - WithBase::of::<E>().at(0),
> +fn program_brom_ga102(
> + pfalcon2: Mmio<'_, PFalcon2Registers>,
> + params: &FalconBromParams,
> +) {
rustfmt triggers here.
next prev parent reply other threads:[~2026-08-28 1:04 UTC|newest]
Thread overview: 57+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-08-19 11:09 [PATCH v3 00/16] rust: io: support register projections and remove relative registers Gary Guo
2026-08-19 11:09 ` [PATCH v3 01/16] rust: io: register: reimplement as proc macro Gary Guo
2026-08-19 11:17 ` sashiko-bot
2026-08-27 6:16 ` Alexandre Courbot
2026-08-27 14:23 ` Gary Guo
2026-08-19 11:09 ` [PATCH v3 02/16] rust: mem: add `transmute` with deferred size check Gary Guo
2026-08-19 11:16 ` sashiko-bot
2026-08-27 6:24 ` Alexandre Courbot
2026-08-27 14:26 ` Gary Guo
2026-08-19 11:09 ` [PATCH v3 03/16] rust: mem: add `AsRepr` and `AsReprMut` Gary Guo
2026-08-19 11:19 ` sashiko-bot
2026-08-26 11:25 ` Alexandre Courbot
2026-08-26 11:50 ` Gary Guo
2026-08-26 13:30 ` Alexandre Courbot
2026-08-19 11:09 ` [PATCH v3 04/16] rust: io: perform conversions using `AsRepr` Gary Guo
2026-08-19 11:19 ` sashiko-bot
2026-08-27 6:53 ` Alexandre Courbot
2026-08-27 14:21 ` Gary Guo
2026-08-27 14:39 ` Alexandre Courbot
2026-08-19 11:09 ` [PATCH v3 05/16] rust: io: support register projections Gary Guo
2026-08-19 11:16 ` sashiko-bot
2026-08-27 7:01 ` Alexandre Courbot
2026-08-19 11:09 ` [PATCH v3 06/16] rust: io: register: allow explicit base type specification Gary Guo
2026-08-19 11:22 ` sashiko-bot
2026-08-27 7:17 ` Alexandre Courbot
2026-08-19 11:09 ` [PATCH v3 07/16] gpu: nova-core: specify base type for registers Gary Guo
2026-08-19 11:19 ` sashiko-bot
2026-08-27 11:20 ` Alexandre Courbot
2026-08-19 11:09 ` [PATCH v3 08/16] drm/tyr: " Gary Guo
2026-08-19 11:17 ` sashiko-bot
2026-08-19 11:09 ` [PATCH v3 09/16] samples: rust: pci: " Gary Guo
2026-08-19 11:14 ` sashiko-bot
2026-08-27 11:29 ` Alexandre Courbot
2026-08-19 11:09 ` [PATCH v3 10/16] rust: io: register: make register have a typed base Gary Guo
2026-08-19 11:18 ` sashiko-bot
2026-08-27 13:42 ` Alexandre Courbot
2026-08-27 14:32 ` Gary Guo
2026-08-28 0:01 ` Alexandre Courbot
2026-08-19 11:09 ` [PATCH v3 11/16] rust: io: register: support fixed offset register without bitfield Gary Guo
2026-08-19 11:17 ` sashiko-bot
2026-08-28 0:38 ` Alexandre Courbot
2026-08-19 11:09 ` [PATCH v3 12/16] gpu: nova-core: use projection for PFALCON and PFALCON2 registers Gary Guo
2026-08-19 11:17 ` sashiko-bot
2026-08-28 1:04 ` Alexandre Courbot [this message]
2026-08-28 1:24 ` Alexandre Courbot
2026-08-19 11:09 ` [PATCH v3 13/16] gpu: nova-core: convert hshub0 from relative register to projection Gary Guo
2026-08-19 11:23 ` sashiko-bot
2026-08-28 1:29 ` Alexandre Courbot
2026-08-19 11:09 ` [PATCH v3 14/16] rust: io: register: remove relative registers Gary Guo
2026-08-19 11:23 ` sashiko-bot
2026-08-28 1:33 ` Alexandre Courbot
2026-08-19 11:09 ` [PATCH v3 15/16] rust: io: register: remove `Register` trait and cleanup macro Gary Guo
2026-08-19 11:21 ` sashiko-bot
2026-08-28 2:07 ` Alexandre Courbot
2026-08-19 11:09 ` [PATCH v3 16/16] rust: io: register: unify handling of register with/without bitfields Gary Guo
2026-08-19 11:26 ` sashiko-bot
2026-08-28 2:07 ` Alexandre Courbot
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=DL068LFDXPM1.7A1482C1UJF@nvidia.com \
--to=acourbot@nvidia.com \
--cc=a.hindborg@kernel.org \
--cc=airlied@gmail.com \
--cc=aliceryhl@google.com \
--cc=bhelgaas@google.com \
--cc=bjorn3_gh@protonmail.com \
--cc=boqun@kernel.org \
--cc=dakr@kernel.org \
--cc=daniel.almeida@collabora.com \
--cc=dri-devel@lists.freedesktop.org \
--cc=driver-core@lists.linux.dev \
--cc=gary@garyguo.net \
--cc=kwilczynski@kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-pci@vger.kernel.org \
--cc=lossin@kernel.org \
--cc=nova-gpu@lists.linux.dev \
--cc=ojeda@kernel.org \
--cc=rust-for-linux@vger.kernel.org \
--cc=simona@ffwll.ch \
--cc=tamird@kernel.org \
--cc=tmgross@umich.edu \
--cc=work@onurozkan.dev \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox