From: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
To: Tomi Valkeinen <tomi.valkeinen@ti.com>
Cc: Tony Lindgren <tony@atomide.com>,
hns@goldelico.com, Sekhar Nori <nsekhar@ti.com>,
Sebastian Reichel <sre@kernel.org>,
dri-devel@lists.freedesktop.org, linux-omap@vger.kernel.org,
Sam Ravnborg <sam@ravnborg.org>,
Nikhil Devshatwar <nikhil.nd@ti.com>
Subject: Re: [PATCH v5 11/29] drm/omap: dsi: pass vc to various functions
Date: Tue, 8 Dec 2020 17:38:59 +0200 [thread overview]
Message-ID: <X8+eEwNnvSolerN3@pendragon.ideasonboard.com> (raw)
In-Reply-To: <20201208122855.254819-12-tomi.valkeinen@ti.com>
Hi Tomi,
Thank you for the patch.
On Tue, Dec 08, 2020 at 02:28:37PM +0200, Tomi Valkeinen wrote:
> To start fixing the issues related to channels and vcs described in the
> previous commit, pass vc to various functions which will need it do
> properly handle different DSI channels and VCs.
This is a bit hard to review as you add the OMAP DSI VC as a parameter
(named vc) to some functions , and the MIPI DSI virtual channel as a
parameter (named channel) to other functions. Only the former matches
the commit message. Splitting this in two would make the changes
clearer. Still, I believe the patch is correct, so
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
> No functional changes.
>
> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
> ---
> drivers/gpu/drm/omapdrm/dss/dsi.c | 54 ++++++++++++++++---------------
> 1 file changed, 28 insertions(+), 26 deletions(-)
>
> diff --git a/drivers/gpu/drm/omapdrm/dss/dsi.c b/drivers/gpu/drm/omapdrm/dss/dsi.c
> index 273159e8f992..8d8412199693 100644
> --- a/drivers/gpu/drm/omapdrm/dss/dsi.c
> +++ b/drivers/gpu/drm/omapdrm/dss/dsi.c
> @@ -214,9 +214,9 @@ static void dsi_set_ulps_auto(struct dsi_data *dsi, bool enable);
> static int dsi_display_init_dispc(struct dsi_data *dsi);
> static void dsi_display_uninit_dispc(struct dsi_data *dsi);
>
> -static int dsi_vc_send_null(struct dsi_data *dsi, int vc);
> +static int dsi_vc_send_null(struct dsi_data *dsi, int vc, int channel);
>
> -static ssize_t _omap_dsi_host_transfer(struct dsi_data *dsi,
> +static ssize_t _omap_dsi_host_transfer(struct dsi_data *dsi, int vc,
> const struct mipi_dsi_msg *msg);
>
> static void dsi_display_disable(struct omap_dss_device *dssdev);
> @@ -2455,7 +2455,7 @@ static void dsi_vc_enable_hs(struct omap_dss_device *dssdev, int vc,
>
> /* start the DDR clock by sending a NULL packet */
> if (dsi->vm_timings.ddr_clk_always_on && enable)
> - dsi_vc_send_null(dsi, vc);
> + dsi_vc_send_null(dsi, vc, dsi->dsidev->channel);
>
> dsi->in_lp_mode = !enable;
> }
> @@ -2605,7 +2605,8 @@ static int dsi_vc_send_bta_sync(struct omap_dss_device *dssdev, int vc)
> }
>
> static inline void dsi_vc_write_long_header(struct dsi_data *dsi, int vc,
> - u8 data_type, u16 len, u8 ecc)
> + int channel, u8 data_type, u16 len,
> + u8 ecc)
> {
> u32 val;
> u8 data_id;
> @@ -2633,7 +2634,7 @@ static inline void dsi_vc_write_long_payload(struct dsi_data *dsi, int vc,
> dsi_write_reg(dsi, DSI_VC_LONG_PACKET_PAYLOAD(vc), val);
> }
>
> -static int dsi_vc_send_long(struct dsi_data *dsi,
> +static int dsi_vc_send_long(struct dsi_data *dsi, int vc,
> const struct mipi_dsi_msg *msg)
> {
> /*u32 val; */
> @@ -2653,7 +2654,7 @@ static int dsi_vc_send_long(struct dsi_data *dsi,
>
> dsi_vc_config_source(dsi, msg->channel, DSI_VC_SOURCE_L4);
>
> - dsi_vc_write_long_header(dsi, msg->channel, msg->type, msg->tx_len, 0);
> + dsi_vc_write_long_header(dsi, vc, msg->channel, msg->type, msg->tx_len, 0);
>
> p = msg->tx_buf;
> for (i = 0; i < msg->tx_len >> 2; i++) {
> @@ -2696,7 +2697,7 @@ static int dsi_vc_send_long(struct dsi_data *dsi,
> return r;
> }
>
> -static int dsi_vc_send_short(struct dsi_data *dsi,
> +static int dsi_vc_send_short(struct dsi_data *dsi, int vc,
> const struct mipi_dsi_msg *msg)
> {
> struct mipi_dsi_packet pkt;
> @@ -2727,26 +2728,26 @@ static int dsi_vc_send_short(struct dsi_data *dsi,
> return 0;
> }
>
> -static int dsi_vc_send_null(struct dsi_data *dsi, int vc)
> +static int dsi_vc_send_null(struct dsi_data *dsi, int vc, int channel)
> {
> const struct mipi_dsi_msg msg = {
> .channel = vc,
> .type = MIPI_DSI_NULL_PACKET,
> };
>
> - return dsi_vc_send_long(dsi, &msg);
> + return dsi_vc_send_long(dsi, vc, &msg);
> }
>
> -static int dsi_vc_write_common(struct omap_dss_device *dssdev,
> +static int dsi_vc_write_common(struct omap_dss_device *dssdev, int vc,
> const struct mipi_dsi_msg *msg)
> {
> struct dsi_data *dsi = to_dsi_data(dssdev);
> int r;
>
> if (mipi_dsi_packet_format_is_short(msg->type))
> - r = dsi_vc_send_short(dsi, msg);
> + r = dsi_vc_send_short(dsi, vc, msg);
> else
> - r = dsi_vc_send_long(dsi, msg);
> + r = dsi_vc_send_long(dsi, vc, msg);
>
> if (r < 0)
> return r;
> @@ -2882,7 +2883,7 @@ static int dsi_vc_read_rx_fifo(struct dsi_data *dsi, int vc, u8 *buf,
> return r;
> }
>
> -static int dsi_vc_dcs_read(struct omap_dss_device *dssdev,
> +static int dsi_vc_dcs_read(struct omap_dss_device *dssdev, int vc,
> const struct mipi_dsi_msg *msg)
> {
> struct dsi_data *dsi = to_dsi_data(dssdev);
> @@ -2893,7 +2894,7 @@ static int dsi_vc_dcs_read(struct omap_dss_device *dssdev,
> if (dsi->debug_read)
> DSSDBG("%s(ch %d, cmd %x)\n", __func__, channel, cmd);
>
> - r = dsi_vc_send_short(dsi, msg);
> + r = dsi_vc_send_short(dsi, vc, msg);
> if (r)
> goto err;
>
> @@ -2917,13 +2918,13 @@ static int dsi_vc_dcs_read(struct omap_dss_device *dssdev,
> return r;
> }
>
> -static int dsi_vc_generic_read(struct omap_dss_device *dssdev,
> +static int dsi_vc_generic_read(struct omap_dss_device *dssdev, int vc,
> const struct mipi_dsi_msg *msg)
> {
> struct dsi_data *dsi = to_dsi_data(dssdev);
> int r;
>
> - r = dsi_vc_send_short(dsi, msg);
> + r = dsi_vc_send_short(dsi, vc, msg);
> if (r)
> goto err;
>
> @@ -3672,7 +3673,7 @@ static void dsi_enable_video_output(struct omap_dss_device *dssdev, int vc)
>
> word_count = DIV_ROUND_UP(dsi->vm.hactive * bpp, 8);
>
> - dsi_vc_write_long_header(dsi, vc, data_type,
> + dsi_vc_write_long_header(dsi, vc, dsi->dsidev->channel, data_type,
> word_count, 0);
>
> dsi_vc_enable(dsi, vc, true);
> @@ -3770,7 +3771,7 @@ static void dsi_update_screen_dispc(struct dsi_data *dsi)
> l = FLD_VAL(total_len, 23, 0); /* TE_SIZE */
> dsi_write_reg(dsi, DSI_VC_TE(vc), l);
>
> - dsi_vc_write_long_header(dsi, vc, MIPI_DSI_DCS_LONG_WRITE,
> + dsi_vc_write_long_header(dsi, vc, dsi->dsidev->channel, MIPI_DSI_DCS_LONG_WRITE,
> packet_len, 0);
>
> if (dsi->te_enabled)
> @@ -3882,7 +3883,7 @@ static int _dsi_update(struct dsi_data *dsi)
> return 0;
> }
>
> -static int _dsi_send_nop(struct dsi_data *dsi, int channel)
> +static int _dsi_send_nop(struct dsi_data *dsi, int vc, int channel)
> {
> const u8 payload[] = { MIPI_DCS_NOP };
> const struct mipi_dsi_msg msg = {
> @@ -3894,7 +3895,7 @@ static int _dsi_send_nop(struct dsi_data *dsi, int channel)
>
> WARN_ON(!dsi_bus_is_locked(dsi));
>
> - return _omap_dsi_host_transfer(dsi, &msg);
> + return _omap_dsi_host_transfer(dsi, vc, &msg);
> }
>
> static int dsi_update_channel(struct omap_dss_device *dssdev, int vc)
> @@ -3923,7 +3924,7 @@ static int dsi_update_channel(struct omap_dss_device *dssdev, int vc)
> * updates stop working. This is probably related to DSI spec stating
> * that the DSI host should transition to LP at least once per frame.
> */
> - r = _dsi_send_nop(dsi, vc);
> + r = _dsi_send_nop(dsi, vc, dsi->dsidev->channel);
> if (r < 0) {
> DSSWARN("failed to send nop between frames: %d\n", r);
> goto err;
> @@ -4885,7 +4886,7 @@ static enum omap_channel dsi_get_dispc_channel(struct dsi_data *dsi)
> }
> }
>
> -static ssize_t _omap_dsi_host_transfer(struct dsi_data *dsi,
> +static ssize_t _omap_dsi_host_transfer(struct dsi_data *dsi, int vc,
> const struct mipi_dsi_msg *msg)
> {
> struct omap_dss_device *dssdev = &dsi->output;
> @@ -4905,15 +4906,15 @@ static ssize_t _omap_dsi_host_transfer(struct dsi_data *dsi,
> case MIPI_DSI_DCS_LONG_WRITE:
> case MIPI_DSI_SET_MAXIMUM_RETURN_PACKET_SIZE:
> case MIPI_DSI_NULL_PACKET:
> - r = dsi_vc_write_common(dssdev, msg);
> + r = dsi_vc_write_common(dssdev, vc, msg);
> break;
> case MIPI_DSI_GENERIC_READ_REQUEST_0_PARAM:
> case MIPI_DSI_GENERIC_READ_REQUEST_1_PARAM:
> case MIPI_DSI_GENERIC_READ_REQUEST_2_PARAM:
> - r = dsi_vc_generic_read(dssdev, msg);
> + r = dsi_vc_generic_read(dssdev, vc, msg);
> break;
> case MIPI_DSI_DCS_READ:
> - r = dsi_vc_dcs_read(dssdev, msg);
> + r = dsi_vc_dcs_read(dssdev, vc, msg);
> break;
> default:
> r = -EINVAL;
> @@ -4941,12 +4942,13 @@ static ssize_t omap_dsi_host_transfer(struct mipi_dsi_host *host,
> {
> struct dsi_data *dsi = host_to_omap(host);
> int r;
> + int vc = VC_DEFAULT;
>
> dsi_bus_lock(dsi);
>
> if (dsi->video_enabled) {
> dsi_set_ulps_auto(dsi, false);
> - r = _omap_dsi_host_transfer(dsi, msg);
> + r = _omap_dsi_host_transfer(dsi, vc, msg);
> dsi_set_ulps_auto(dsi, true);
> } else {
> r = -EIO;
--
Regards,
Laurent Pinchart
_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel
next prev parent reply other threads:[~2020-12-08 15:39 UTC|newest]
Thread overview: 72+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-12-08 12:28 [PATCH v5 00/29] Convert DSI code to use drm_mipi_dsi and drm_panel (second half) Tomi Valkeinen
2020-12-08 12:28 ` [PATCH v5 01/29] drm/panel: panel-dsi-cm: cleanup tear enable Tomi Valkeinen
2020-12-14 13:09 ` Sebastian Reichel
2020-12-08 12:28 ` [PATCH v5 02/29] ARM: dts: omap5: add address-cells & size-cells to dsi Tomi Valkeinen
2020-12-14 13:09 ` Sebastian Reichel
2020-12-08 12:28 ` [PATCH v5 03/29] drm/omap: pll: fix iteration loop check Tomi Valkeinen
2020-12-14 13:10 ` Sebastian Reichel
2020-12-08 12:28 ` [PATCH v5 04/29] drm/omap: dsi: set trans_mode according to client mode_flags Tomi Valkeinen
2020-12-14 13:10 ` Sebastian Reichel
2020-12-08 12:28 ` [PATCH v5 05/29] drm/panel: panel-dsi-cm: set column & page at setup Tomi Valkeinen
2020-12-14 13:10 ` Sebastian Reichel
2020-12-08 12:28 ` [PATCH v5 06/29] drm/omap: dsi: send nop instead of page & column Tomi Valkeinen
2020-12-14 14:22 ` Sebastian Reichel
2020-12-08 12:28 ` [PATCH v5 07/29] drm/omap: dsi: simplify VC handling Tomi Valkeinen
2020-12-14 14:31 ` Sebastian Reichel
2020-12-08 12:28 ` [PATCH v5 08/29] drm/omap: dsi: drop useless channel checks Tomi Valkeinen
2020-12-14 14:32 ` Sebastian Reichel
2020-12-08 12:28 ` [PATCH v5 09/29] drm/omap: dsi: cleanup dispc channel usage Tomi Valkeinen
2020-12-08 15:17 ` Laurent Pinchart
2020-12-14 14:35 ` Sebastian Reichel
2020-12-08 12:28 ` [PATCH v5 10/29] drm/omap: dsi: rename 'channel' to 'vc' Tomi Valkeinen
2020-12-08 15:22 ` Laurent Pinchart
2020-12-14 15:18 ` Sebastian Reichel
2020-12-08 12:28 ` [PATCH v5 11/29] drm/omap: dsi: pass vc to various functions Tomi Valkeinen
2020-12-08 15:38 ` Laurent Pinchart [this message]
2020-12-08 15:45 ` Tomi Valkeinen
2020-12-14 15:37 ` Sebastian Reichel
2020-12-08 12:28 ` [PATCH v5 12/29] drm/omap: dsi: untangle vc & channel Tomi Valkeinen
2020-12-08 15:41 ` Laurent Pinchart
2020-12-14 15:47 ` Sebastian Reichel
2020-12-08 12:28 ` [PATCH v5 13/29] drm/omap: dsi: skip dsi_vc_enable_hs when already in correct mode Tomi Valkeinen
2020-12-14 15:50 ` Sebastian Reichel
2020-12-08 12:28 ` [PATCH v5 14/29] drm/omap: dsi: enable HS before sending the frame Tomi Valkeinen
2020-12-08 15:42 ` Laurent Pinchart
2020-12-14 15:51 ` Sebastian Reichel
2020-12-08 12:28 ` [PATCH v5 15/29] drm/omap: dsi: use separate VCs for cmd and video Tomi Valkeinen
2020-12-14 15:54 ` Sebastian Reichel
2020-12-08 12:28 ` [PATCH v5 16/29] drm/panel: panel-dsi-cm: remove extra 'if' Tomi Valkeinen
2020-12-08 15:42 ` Laurent Pinchart
2020-12-14 15:55 ` Sebastian Reichel
2020-12-08 12:28 ` [PATCH v5 17/29] drm/panel: panel-dsi-cm: add panel database to driver Tomi Valkeinen
2020-12-14 16:04 ` Sebastian Reichel
2020-12-08 12:28 ` [PATCH v5 18/29] drm/panel: panel-dsi-cm: drop unneeded includes Tomi Valkeinen
2020-12-14 16:06 ` Sebastian Reichel
2020-12-08 12:28 ` [PATCH v5 19/29] drm/omap: dsi: move structs & defines to dsi.h Tomi Valkeinen
2020-12-14 16:14 ` Sebastian Reichel
2020-12-08 12:28 ` [PATCH v5 20/29] drm/omap: dsi: move enable/disable to bridge enable/disable Tomi Valkeinen
2020-12-14 16:16 ` Sebastian Reichel
2020-12-08 12:28 ` [PATCH v5 21/29] drm/omap: dsi: display_enable cleanup Tomi Valkeinen
2020-12-14 16:17 ` Sebastian Reichel
2020-12-08 12:28 ` [PATCH v5 22/29] drm/omap: dsi: display_disable cleanup Tomi Valkeinen
2020-12-14 16:20 ` Sebastian Reichel
2020-12-08 12:28 ` [PATCH v5 23/29] drm/omap: dsi: rename dsi_display_* functions Tomi Valkeinen
2020-12-14 16:22 ` Sebastian Reichel
2020-12-08 12:28 ` [PATCH v5 24/29] drm/omap: dsi: cleanup initial vc setup Tomi Valkeinen
2020-12-14 16:34 ` Sebastian Reichel
2020-12-08 12:28 ` [PATCH v5 25/29] drm/omap: dsi: split video mode enable/disable into separate func Tomi Valkeinen
2020-12-14 16:38 ` Sebastian Reichel
2020-12-08 12:28 ` [PATCH v5 26/29] drm/omap: dsi: fix and cleanup ddr_clk_always_on Tomi Valkeinen
2020-12-14 16:39 ` Sebastian Reichel
2020-12-08 12:28 ` [PATCH v5 27/29] drm/omap: dsi: remove ulps support Tomi Valkeinen
2020-12-14 17:39 ` Sebastian Reichel
2020-12-14 18:55 ` Tomi Valkeinen
2020-12-14 22:08 ` Sebastian Reichel
2020-12-08 12:28 ` [PATCH v5 28/29] drm/omap: dsi: fix DCS_CMD_ENABLE Tomi Valkeinen
2020-12-14 16:48 ` Sebastian Reichel
2020-12-08 12:28 ` [PATCH v5 29/29] drm/omap: dsi: allow DSI commands to be sent early Tomi Valkeinen
2020-12-08 15:48 ` Laurent Pinchart
2020-12-10 7:34 ` Tomi Valkeinen
2020-12-10 8:17 ` Tomi Valkeinen
2020-12-14 17:17 ` Sebastian Reichel
2020-12-15 10:05 ` Tomi Valkeinen
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=X8+eEwNnvSolerN3@pendragon.ideasonboard.com \
--to=laurent.pinchart@ideasonboard.com \
--cc=dri-devel@lists.freedesktop.org \
--cc=hns@goldelico.com \
--cc=linux-omap@vger.kernel.org \
--cc=nikhil.nd@ti.com \
--cc=nsekhar@ti.com \
--cc=sam@ravnborg.org \
--cc=sre@kernel.org \
--cc=tomi.valkeinen@ti.com \
--cc=tony@atomide.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox