From: Marcos Paulo de Souza <marcos.mage@gmail.com>
To: linux-kernel@vger.kernel.org
Cc: dri-devel@lists.freedesktop.org
Subject: Re: max PWM is zero
Date: Sat, 19 Nov 2011 11:26:07 +0000 (Local time zone must be set--see zic manual page) [thread overview]
Message-ID: <alpine.LNX.2.00.1111191124350.5248@darkstar.example.net> (raw)
In-Reply-To: <alpine.LNX.2.00.1111151301410.2693@darkstar.example.net>
[-- Attachment #1: Type: TEXT/PLAIN, Size: 10633 bytes --]
So, anybody gets the same message?
I'm trying the 3.2-rc2 and it gives the same message.
Again, if you need someone to make tests, or test some patches, I'm
able to do this.
* Uma vida sem desafios é uma vida sem razão *
* A life without challanges is a non reason life *
On Tue, 15 Nov 2011, Marcos Paulo de Souza wrote:
> Hi lkml,
>
> I'm using the kernel 3.2-rc1 and I'm getting the following message in my
> dmesg:
> fixme: max PWM is zero.
>
> I don't remember if this message was here before...
>
> I'm trying to verify what is causing this. I found this waring message in the
> drivers/gpu/drm/i915/intel_panel.c.
>
> There is a comment above this message, talking about put a code to query
> mode clock or hw clock to set the max PWM.
>
> Bellow is my lspci.
>
> I will be happy if you continue to cc me, and if you need any test, I'm able
> to do this.
>
> 00:00.0 Host bridge: Intel Corporation Mobile 4 Series Chipset Memory
> Controller Hub (rev 09)
> Subsystem: FIRST INTERNATIONAL Computer Inc Device 3009
> Flags: bus master, fast devsel, latency 0
> Capabilities: [e0] Vendor Specific Information: Len=0a <?>
> Kernel driver in use: agpgart-intel
> Kernel modules: intel-agp
>
> 00:02.0 VGA compatible controller: Intel Corporation Mobile 4 Series Chipset
> Integrated Graphics Controller (rev 09) (prog-if 00 [VGA controller])
> Subsystem: FIRST INTERNATIONAL Computer Inc Device 3009
> Flags: bus master, fast devsel, latency 0, IRQ 44
> Memory at f8000000 (64-bit, non-prefetchable) [size=4M]
> Memory at d0000000 (64-bit, prefetchable) [size=256M]
> I/O ports at 1800 [size=8]
> Expansion ROM at <unassigned> [disabled]
> Capabilities: [90] MSI: Enable+ Count=1/1 Maskable- 64bit-
> Capabilities: [d0] Power Management version 3
> Kernel driver in use: i915
> Kernel modules: i915
>
> 00:02.1 Display controller: Intel Corporation Mobile 4 Series Chipset
> Integrated Graphics Controller (rev 09)
> Subsystem: FIRST INTERNATIONAL Computer Inc Device 3009
> Flags: bus master, fast devsel, latency 0
> Memory at f8400000 (64-bit, non-prefetchable) [size=1M]
> Capabilities: [d0] Power Management version 3
>
> 00:1a.0 USB Controller: Intel Corporation 82801I (ICH9 Family) USB UHCI
> Controller #4 (rev 03) (prog-if 00 [UHCI])
> Subsystem: FIRST INTERNATIONAL Computer Inc Device 3009
> Flags: bus master, medium devsel, latency 0, IRQ 16
> I/O ports at 1820 [size=32]
> Capabilities: [50] PCI Advanced Features
> Kernel driver in use: uhci_hcd
>
> 00:1a.1 USB Controller: Intel Corporation 82801I (ICH9 Family) USB UHCI
> Controller #5 (rev 03) (prog-if 00 [UHCI])
> Subsystem: FIRST INTERNATIONAL Computer Inc Device 3009
> Flags: bus master, medium devsel, latency 0, IRQ 21
> I/O ports at 1840 [size=32]
> Capabilities: [50] PCI Advanced Features
> Kernel driver in use: uhci_hcd
>
> 00:1a.2 USB Controller: Intel Corporation 82801I (ICH9 Family) USB UHCI
> Controller #6 (rev 03) (prog-if 00 [UHCI])
> Subsystem: FIRST INTERNATIONAL Computer Inc Device 3009
> Flags: bus master, medium devsel, latency 0, IRQ 19
> I/O ports at 1860 [size=32]
> Capabilities: [50] PCI Advanced Features
> Kernel driver in use: uhci_hcd
>
> 00:1a.7 USB Controller: Intel Corporation 82801I (ICH9 Family) USB2 EHCI
> Controller #2 (rev 03) (prog-if 20 [EHCI])
> Subsystem: FIRST INTERNATIONAL Computer Inc Device 3009
> Flags: bus master, medium devsel, latency 0, IRQ 19
> Memory at f8704000 (32-bit, non-prefetchable) [size=1K]
> Capabilities: [50] Power Management version 2
> Capabilities: [58] Debug port: BAR=1 offset=00a0
> Capabilities: [98] PCI Advanced Features
> Kernel driver in use: ehci_hcd
>
> 00:1b.0 Audio device: Intel Corporation 82801I (ICH9 Family) HD Audio
> Controller (rev 03)
> Subsystem: FIRST INTERNATIONAL Computer Inc Device 3009
> Flags: bus master, fast devsel, latency 0, IRQ 43
> Memory at f8700000 (64-bit, non-prefetchable) [size=16K]
> Capabilities: [50] Power Management version 2
> Capabilities: [60] MSI: Enable+ Count=1/1 Maskable- 64bit+
> Capabilities: [70] Express Root Complex Integrated Endpoint, MSI 00
> Capabilities: [100] Virtual Channel
> Capabilities: [130] Root Complex Link
> Kernel driver in use: snd_hda_intel
> Kernel modules: snd-hda-intel
>
> 00:1c.0 PCI bridge: Intel Corporation 82801I (ICH9 Family) PCI Express Port 1
> (rev 03) (prog-if 00 [Normal decode])
> Flags: bus master, fast devsel, latency 0
> Bus: primary=00, secondary=02, subordinate=03, sec-latency=0
> I/O behind bridge: 00002000-00002fff
> Memory behind bridge: f4000000-f5ffffff
> Prefetchable memory behind bridge: 00000000f0000000-00000000f1ffffff
> Capabilities: [40] Express Root Port (Slot+), MSI 00
> Capabilities: [80] MSI: Enable+ Count=1/1 Maskable- 64bit-
> Capabilities: [90] Subsystem: Gammagraphx, Inc. (or missing ID)
> Device 0000
> Capabilities: [a0] Power Management version 2
> Capabilities: [100] Virtual Channel
> Capabilities: [180] Root Complex Link
> Kernel driver in use: pcieport
> Kernel modules: shpchp
>
> 00:1c.5 PCI bridge: Intel Corporation 82801I (ICH9 Family) PCI Express Port 6
> (rev 03) (prog-if 00 [Normal decode])
> Flags: bus master, fast devsel, latency 0
> Bus: primary=00, secondary=04, subordinate=05, sec-latency=0
> I/O behind bridge: 00003000-00003fff
> Memory behind bridge: f6000000-f7ffffff
> Prefetchable memory behind bridge: 00000000f2000000-00000000f3ffffff
> Capabilities: [40] Express Root Port (Slot+), MSI 00
> Capabilities: [80] MSI: Enable+ Count=1/1 Maskable- 64bit-
> Capabilities: [90] Subsystem: Gammagraphx, Inc. (or missing ID)
> Device 0000
> Capabilities: [a0] Power Management version 2
> Capabilities: [100] Virtual Channel
> Capabilities: [180] Root Complex Link
> Kernel driver in use: pcieport
> Kernel modules: shpchp
>
> 00:1d.0 USB Controller: Intel Corporation 82801I (ICH9 Family) USB UHCI
> Controller #1 (rev 03) (prog-if 00 [UHCI])
> Subsystem: FIRST INTERNATIONAL Computer Inc Device 3009
> Flags: bus master, medium devsel, latency 0, IRQ 23
> I/O ports at 1880 [size=32]
> Capabilities: [50] PCI Advanced Features
> Kernel driver in use: uhci_hcd
>
> 00:1d.1 USB Controller: Intel Corporation 82801I (ICH9 Family) USB UHCI
> Controller #2 (rev 03) (prog-if 00 [UHCI])
> Subsystem: FIRST INTERNATIONAL Computer Inc Device 3009
> Flags: bus master, medium devsel, latency 0, IRQ 19
> I/O ports at 18a0 [size=32]
> Capabilities: [50] PCI Advanced Features
> Kernel driver in use: uhci_hcd
>
> 00:1d.2 USB Controller: Intel Corporation 82801I (ICH9 Family) USB UHCI
> Controller #3 (rev 03) (prog-if 00 [UHCI])
> Subsystem: FIRST INTERNATIONAL Computer Inc Device 3009
> Flags: bus master, medium devsel, latency 0, IRQ 18
> I/O ports at 18c0 [size=32]
> Capabilities: [50] PCI Advanced Features
> Kernel driver in use: uhci_hcd
>
> 00:1d.7 USB Controller: Intel Corporation 82801I (ICH9 Family) USB2 EHCI
> Controller #1 (rev 03) (prog-if 20 [EHCI])
> Subsystem: FIRST INTERNATIONAL Computer Inc Device 3009
> Flags: bus master, medium devsel, latency 0, IRQ 23
> Memory at f8704400 (32-bit, non-prefetchable) [size=1K]
> Capabilities: [50] Power Management version 2
> Capabilities: [58] Debug port: BAR=1 offset=00a0
> Capabilities: [98] PCI Advanced Features
> Kernel driver in use: ehci_hcd
>
> 00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev 93)
> (prog-if 01 [Subtractive decode])
> Flags: bus master, fast devsel, latency 0
> Bus: primary=00, secondary=06, subordinate=06, sec-latency=0
> Capabilities: [50] Subsystem: FIRST INTERNATIONAL Computer Inc Device
> 3009
>
> 00:1f.0 ISA bridge: Intel Corporation ICH9M LPC Interface Controller (rev 03)
> Subsystem: FIRST INTERNATIONAL Computer Inc Device 3009
> Flags: bus master, medium devsel, latency 0
> Capabilities: [e0] Vendor Specific Information: Len=0c <?>
> Kernel modules: iTCO_wdt
>
> 00:1f.2 IDE interface: Intel Corporation ICH9M/M-E 2 port SATA IDE Controller
> (rev 03) (prog-if 8f [Master SecP SecO PriP PriO])
> Subsystem: FIRST INTERNATIONAL Computer Inc Device 3009
> Flags: bus master, 66MHz, medium devsel, latency 0, IRQ 19
> I/O ports at 18f8 [size=8]
> I/O ports at 180c [size=4]
> I/O ports at 18f0 [size=8]
> I/O ports at 1808 [size=4]
> I/O ports at 18e0 [size=16]
> I/O ports at 1810 [size=16]
> Capabilities: [70] Power Management version 3
> Capabilities: [b0] PCI Advanced Features
> Kernel driver in use: ata_piix
>
> 00:1f.3 SMBus: Intel Corporation 82801I (ICH9 Family) SMBus Controller (rev
> 03)
> Subsystem: FIRST INTERNATIONAL Computer Inc Device 3009
> Flags: medium devsel, IRQ 19
> Memory at c0000000 (64-bit, non-prefetchable) [size=256]
> I/O ports at 1c00 [size=32]
> Kernel driver in use: i801_smbus
> Kernel modules: i2c-i801
>
> 00:1f.5 IDE interface: Intel Corporation ICH9M/M-E 2 port SATA IDE Controller
> (rev 03) (prog-if 85 [Master SecO PriO])
> Subsystem: FIRST INTERNATIONAL Computer Inc Device 3009
> Flags: bus master, 66MHz, medium devsel, latency 0, IRQ 19
> I/O ports at 1c50 [size=8]
> I/O ports at 1c44 [size=4]
> I/O ports at 1c48 [size=8]
> I/O ports at 1c40 [size=4]
> I/O ports at 1c30 [size=16]
> I/O ports at 1c20 [size=16]
> Capabilities: [70] Power Management version 3
> Capabilities: [b0] PCI Advanced Features
> Kernel driver in use: ata_piix
>
> 04:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168B
> PCI Express Gigabit Ethernet controller (rev 02)
> Subsystem: FIRST INTERNATIONAL Computer Inc Device 3009
> Flags: bus master, fast devsel, latency 0, IRQ 42
> I/O ports at 3000 [size=256]
> Memory at f6000000 (64-bit, non-prefetchable) [size=4K]
> Memory at f2000000 (64-bit, prefetchable) [size=64K]
> [virtual] Expansion ROM at f2020000 [disabled] [size=128K]
> Capabilities: [40] Power Management version 3
> Capabilities: [50] MSI: Enable+ Count=1/1 Maskable- 64bit+
> Capabilities: [70] Express Endpoint, MSI 01
> Capabilities: [b0] MSI-X: Enable- Count=2 Masked-
> Capabilities: [d0] Vital Product Data
> Capabilities: [100] Advanced Error Reporting
> Capabilities: [140] Virtual Channel
> Capabilities: [160] Device Serial Number 71-00-00-00-68-4c-e0-00
> Kernel driver in use: r8169
> Kernel modules: r8169
>
>
> * Uma vida sem desafios é uma vida sem razão *
> * A life without challanges is a non reason life *
[-- Attachment #2: Type: text/plain, Size: 159 bytes --]
_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
http://lists.freedesktop.org/mailman/listinfo/dri-devel
next prev parent reply other threads:[~2011-11-19 11:26 UTC|newest]
Thread overview: 6+ messages / expand[flat|nested] mbox.gz Atom feed top
2011-11-15 15:14 max PWM is zero Marcos Paulo de Souza
2011-11-19 11:26 ` Marcos Paulo de Souza [this message]
2011-11-19 18:50 ` Keith Packard
2011-11-21 22:48 ` Marcos Paulo de Souza
2011-11-22 1:40 ` Keith Packard
2011-11-22 2:38 ` Lucas De Marchi
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=alpine.LNX.2.00.1111191124350.5248@darkstar.example.net \
--to=marcos.mage@gmail.com \
--cc=dri-devel@lists.freedesktop.org \
--cc=linux-kernel@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox