dri-devel Archive on lore.kernel.org
 help / color / mirror / Atom feed
From: Rodrigo Vivi <rodrigo.vivi@intel.com>
To: "Christian König" <christian.koenig@amd.com>
Cc: Raag Jadav <raag.jadav@intel.com>,
	<dri-devel@lists.freedesktop.org>, <riana.tauro@intel.com>,
	<mallesh.koujalagi@intel.com>, <matthew.brost@intel.com>,
	<andrealmeid@igalia.com>
Subject: Re: [PATCH v2] drm: Log recovery method with wedged event
Date: Tue, 20 Oct 2026 09:33:42 -0400	[thread overview]
Message-ID: <atdttlqZ__N9Q6Nf@intel.com> (raw)
In-Reply-To: <ff80ede1-d0be-46cc-9929-f53ecd961d82@amd.com>

On Tue, Oct 20, 2026 at 01:13:50PM +0200, Christian König wrote:
> On 10/20/26 04:21, Raag Jadav wrote:
> > Currently, drm_dev_wedged_event() logs a basic message of device being
> > wedged, but doesn't print the recovery method used by the caller. Log it
> > for easier bug report analysis.
> > 
> > While at it, as device wedging is a catastrophic event for the cases that
> > do need recovery, distinguish them and raise their log level to drm_warn().
> > 
> > Signed-off-by: Raag Jadav <raag.jadav@intel.com>
> > ---
> > v2: Distinguish between recovery and no recovery cases (Christian, Rodrigo)
> > ---
> >  drivers/gpu/drm/drm_drv.c | 6 ++++--
> >  1 file changed, 4 insertions(+), 2 deletions(-)
> > 
> > diff --git a/drivers/gpu/drm/drm_drv.c b/drivers/gpu/drm/drm_drv.c
> > index cb53baa70995..7f8abb72f548 100644
> > --- a/drivers/gpu/drm/drm_drv.c
> > +++ b/drivers/gpu/drm/drm_drv.c
> > @@ -598,8 +598,10 @@ int drm_dev_wedged_event(struct drm_device *dev, unsigned long method,
> >  		/* Caller is unsure about recovery, do the best we can at this point. */
> >  		snprintf(event_string, sizeof(event_string), "%s", "WEDGED=unknown");
> >  
> > -	drm_info(dev, "device wedged, %s\n", method == DRM_WEDGE_RECOVERY_NONE ?
> > -		 "but no recovery needed" : "needs recovery");
> > +	if (method == DRM_WEDGE_RECOVERY_NONE)
> > +		drm_info(dev, "device wedged, but no recovery needed\n");
> > +	else
> > +		drm_warn(dev, "device wedged with method %#lx, needs recovery\n", method);
> 
> That is still not ok.

what I had in mind was a explicit option so the drivers can select if it is
okay or not.

> 
> Again device wedging is a perfectly normal part of operation and clearly doesn't deserves a warning.

sometimes it is not, but I understand your point.

Perhaps we just skip this and in the case where it is not an info + a custom
driver warn is okay since everything will be stopped anyway in this cathastropic
case.

> 
> As far as I can see userspace can spam the log with warnings by just submitting shaders with an endless loop in it.
> 
> Regards,
> Christian.
> 
> >  
> >  	if (info && (info->comm[0] != '\0') && (info->pid >= 0)) {
> >  		snprintf(pid_string, sizeof(pid_string), "PID=%u", info->pid);
> 

      reply	other threads:[~2026-10-20 13:36 UTC|newest]

Thread overview: 3+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2026-10-20  2:21 [PATCH v2] drm: Log recovery method with wedged event Raag Jadav
2026-10-20 11:13 ` Christian König
2026-10-20 13:33   ` Rodrigo Vivi [this message]

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=atdttlqZ__N9Q6Nf@intel.com \
    --to=rodrigo.vivi@intel.com \
    --cc=andrealmeid@igalia.com \
    --cc=christian.koenig@amd.com \
    --cc=dri-devel@lists.freedesktop.org \
    --cc=mallesh.koujalagi@intel.com \
    --cc=matthew.brost@intel.com \
    --cc=raag.jadav@intel.com \
    --cc=riana.tauro@intel.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox