From: "Ville Syrjälä" <ville.syrjala@linux.intel.com>
To: Yitian Shao <fighters390@qq.com>
Cc: intel-gfx@lists.freedesktop.org, dri-devel@lists.freedesktop.org,
jani.nikula@intel.com, sebastian.wick@redhat.com,
uma.shankar@intel.com, suraj.kandpal@intel.com
Subject: Re: [PATCH v3 2/4] drm/i915/dp: Attach HDR_OUTPUT_METADATA on eDP with TCON HDR support
Date: Sat, 21 Nov 2026 03:20:09 +0200 [thread overview]
Message-ID: <awDxyUlkUXE3Cv7Q@intel.com> (raw)
In-Reply-To: <tencent_B8BA9FC944C4CE33D89D83F78E255E124606@qq.com>
On Sat, Nov 21, 2026 at 08:54:07AM +0800, Yitian Shao wrote:
> intel_dp_add_properties() attaches HDR_OUTPUT_METADATA only when the
> encoder can send a gamut metadata DIP, so pre-ICL eDP panels on port A
> never expose it even when their EDID advertises HDR.
>
> Those panels do not use a DIP at all: the metadata is programmed through
> the Intel AUX HDR interface, and the TCON capability is already known
> because intel_edp_backlight_setup() runs before intel_dp_add_properties().
>
> Factor the whole decision into intel_dp_hdr_metadata_supported() and let
> it accept eDP panels whose TCON advertises PQ (ST2084) decoding through
> the Intel AUX HDR backlight interface.
>
> Since no DIP is transmitted in that case, skip computing the infoframe
> when the encoder has no gamut metadata DIP, so that the computed state
> matches what is actually programmed.
>
> Signed-off-by: Yitian Shao <fighters390@qq.com>
> ---
> drivers/gpu/drm/i915/display/intel_dp.c | 31 +++++++++++++++++--
> .../drm/i915/display/intel_dp_aux_backlight.c | 5 +++
> .../drm/i915/display/intel_dp_aux_backlight.h | 3 ++
> 3 files changed, 36 insertions(+), 3 deletions(-)
>
> diff --git a/drivers/gpu/drm/i915/display/intel_dp.c b/drivers/gpu/drm/i915/display/intel_dp.c
> index 2736a78..eeead26 100644
> --- a/drivers/gpu/drm/i915/display/intel_dp.c
> +++ b/drivers/gpu/drm/i915/display/intel_dp.c
> @@ -70,6 +70,7 @@
> #include "intel_display_types.h"
> #include "intel_dp.h"
> #include "intel_dp_aux.h"
> +#include "intel_dp_aux_backlight.h"
> #include "intel_dp_hdcp.h"
> #include "intel_dp_link_training.h"
> #include "intel_dp_mst.h"
> @@ -3085,9 +3086,17 @@ intel_dp_compute_hdr_metadata_infoframe_sdp(struct intel_dp *intel_dp,
> const struct drm_connector_state *conn_state)
> {
> struct intel_display *display = to_intel_display(intel_dp);
> + struct intel_encoder *encoder = &dp_to_dig_port(intel_dp)->base;
> int ret;
> struct hdmi_drm_infoframe *drm_infoframe = &crtc_state->infoframes.drm.drm;
>
> + /*
> + * Without a gamut metadata DIP there is nothing to program here; on
> + * pre-ICL eDP the metadata goes through the AUX HDR interface instead.
> + */
> + if (!intel_dp_has_gamut_metadata_dip(encoder))
> + return;
> +
> if (!conn_state->hdr_output_metadata)
> return;
>
> @@ -6685,6 +6694,24 @@ intel_dp_has_gamut_metadata_dip(struct intel_encoder *encoder)
> return false;
> }
>
> +static bool intel_dp_hdr_metadata_supported(struct intel_dp *intel_dp,
> + struct intel_connector *connector)
> +{
> + struct intel_encoder *encoder = &dp_to_dig_port(intel_dp)->base;
> +
> + /* LSPCON attaches the property itself in intel_dp_connector_register() */
> + if (intel_bios_encoder_is_lspcon(encoder->devdata))
> + return false;
> +
> + if (intel_dp_has_gamut_metadata_dip(encoder))
> + return true;
> +
> + /* Pre-ICL eDP programs the metadata via the AUX HDR interface */
> + return intel_dp_is_edp(intel_dp) &&
> + intel_dp_aux_is_hdr_backlight(connector) &&
> + connector->panel.backlight.edp.intel_cap.supports_2084_decode;
Had to double check that we init the backlight stuff before this,
and yes we do.
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
> +}
> +
> static void
> intel_dp_add_properties(struct intel_dp *intel_dp, struct drm_connector *_connector)
> {
> @@ -6712,9 +6739,7 @@ intel_dp_add_properties(struct intel_dp *intel_dp, struct drm_connector *_connec
> intel_attach_dp_colorspace_property(&connector->base);
> }
>
> - /* LSPCON attaches the property itself in intel_dp_connector_register() */
> - if (!intel_bios_encoder_is_lspcon(dp_to_dig_port(intel_dp)->base.devdata) &&
> - intel_dp_has_gamut_metadata_dip(&dp_to_dig_port(intel_dp)->base))
> + if (intel_dp_hdr_metadata_supported(intel_dp, connector))
> drm_connector_attach_hdr_output_metadata_property(&connector->base);
>
> if (HAS_VRR(display))
> diff --git a/drivers/gpu/drm/i915/display/intel_dp_aux_backlight.c b/drivers/gpu/drm/i915/display/intel_dp_aux_backlight.c
> index eb05ef4..8c7fd99 100644
> --- a/drivers/gpu/drm/i915/display/intel_dp_aux_backlight.c
> +++ b/drivers/gpu/drm/i915/display/intel_dp_aux_backlight.c
> @@ -630,6 +630,11 @@ static const struct intel_panel_bl_funcs intel_dp_hdr_bl_funcs = {
> .get = intel_dp_aux_hdr_get_backlight,
> };
>
> +bool intel_dp_aux_is_hdr_backlight(const struct intel_connector *connector)
> +{
> + return connector->panel.backlight.funcs == &intel_dp_hdr_bl_funcs;
> +}
> +
> static const struct intel_panel_bl_funcs intel_dp_vesa_bl_funcs = {
> .setup = intel_dp_aux_vesa_setup_backlight,
> .enable = intel_dp_aux_vesa_enable_backlight,
> diff --git a/drivers/gpu/drm/i915/display/intel_dp_aux_backlight.h b/drivers/gpu/drm/i915/display/intel_dp_aux_backlight.h
> index ed60c28..1fa1b93 100644
> --- a/drivers/gpu/drm/i915/display/intel_dp_aux_backlight.h
> +++ b/drivers/gpu/drm/i915/display/intel_dp_aux_backlight.h
> @@ -6,8 +6,11 @@
> #ifndef __INTEL_DP_AUX_BACKLIGHT_H__
> #define __INTEL_DP_AUX_BACKLIGHT_H__
>
> +#include <linux/types.h>
> +
> struct intel_connector;
>
> int intel_dp_aux_init_backlight_funcs(struct intel_connector *intel_connector);
> +bool intel_dp_aux_is_hdr_backlight(const struct intel_connector *connector);
>
> #endif /* __INTEL_DP_AUX_BACKLIGHT_H__ */
> --
> 2.53.0
--
Ville Syrjälä
Intel
next prev parent reply other threads:[~2026-11-21 1:20 UTC|newest]
Thread overview: 9+ messages / expand[flat|nested] mbox.gz Atom feed top
[not found] <20261121005409.17626-1-fighters390@qq.com>
2026-11-21 0:54 ` [PATCH v3 1/4] drm/i915/dp: Drop LSPCON check from intel_dp_has_gamut_metadata_dip() Yitian Shao
2026-11-21 1:13 ` Ville Syrjälä
2026-11-21 0:54 ` [PATCH v3 2/4] drm/i915/dp: Attach HDR_OUTPUT_METADATA on eDP with TCON HDR support Yitian Shao
2026-11-21 1:20 ` Ville Syrjälä [this message]
2026-11-21 0:54 ` [PATCH v3 3/4] drm/i915/display: Check gamut metadata DIP support in LSPCON HDR detection Yitian Shao
2026-11-21 1:21 ` Ville Syrjälä
2026-11-21 0:54 ` [PATCH v3 4/4] drm/i915/dp: Prefer SDP over DPCD for HDR content luminance Yitian Shao
2026-11-21 1:28 ` Ville Syrjälä
2026-11-21 1:17 ` [PATCH v3 0/4] drm/i915/dp: Attach HDR_OUTPUT_METADATA on eDP Yitian Shao
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=awDxyUlkUXE3Cv7Q@intel.com \
--to=ville.syrjala@linux.intel.com \
--cc=dri-devel@lists.freedesktop.org \
--cc=fighters390@qq.com \
--cc=intel-gfx@lists.freedesktop.org \
--cc=jani.nikula@intel.com \
--cc=sebastian.wick@redhat.com \
--cc=suraj.kandpal@intel.com \
--cc=uma.shankar@intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox