From: Archit Taneja <architt@codeaurora.org>
To: Russell King <rmk+kernel@armlinux.org.uk>
Cc: dri-devel@lists.freedesktop.org,
Hans Verkuil <hverkuil@xs4all.nl>,
Laurent Pinchart <Laurent.pinchart@ideasonboard.com>,
linux-arm-kernel@lists.infradead.org
Subject: Re: [PATCH v2 1/4] drm/bridge: dw-hdmi: add cec notifier support
Date: Fri, 4 Aug 2017 19:06:16 +0530 [thread overview]
Message-ID: <b68d6c53-4028-b963-5298-696e759bfe19@codeaurora.org> (raw)
In-Reply-To: <a8d2cea3-68b5-d975-836a-14201a6974f6@xs4all.nl>
On 07/31/2017 08:55 PM, Hans Verkuil wrote:
> On 07/31/2017 04:29 PM, Russell King wrote:
>> Add CEC notifier support to the HDMI bridge driver, so that the CEC
>> part of the IP can receive its physical address.
>>
>> Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
>
> Acked-by: Hans Verkuil <hans.verkuil@cisco.com>
>
Queued to drm-misc-next.
Thanks,
Archit
> Regards,
>
> Hans
>
>> ---
>> drivers/gpu/drm/bridge/synopsys/Kconfig | 1 +
>> drivers/gpu/drm/bridge/synopsys/dw-hdmi.c | 22 +++++++++++++++++++++-
>> 2 files changed, 22 insertions(+), 1 deletion(-)
>>
>> diff --git a/drivers/gpu/drm/bridge/synopsys/Kconfig b/drivers/gpu/drm/bridge/synopsys/Kconfig
>> index 53e78d092d18..351db000599a 100644
>> --- a/drivers/gpu/drm/bridge/synopsys/Kconfig
>> +++ b/drivers/gpu/drm/bridge/synopsys/Kconfig
>> @@ -2,6 +2,7 @@ config DRM_DW_HDMI
>> tristate
>> select DRM_KMS_HELPER
>> select REGMAP_MMIO
>> + select CEC_CORE if CEC_NOTIFIER
>>
>> config DRM_DW_HDMI_AHB_AUDIO
>> tristate "Synopsys Designware AHB Audio interface"
>> diff --git a/drivers/gpu/drm/bridge/synopsys/dw-hdmi.c b/drivers/gpu/drm/bridge/synopsys/dw-hdmi.c
>> index ead11242c4b9..82e55ee8e4fa 100644
>> --- a/drivers/gpu/drm/bridge/synopsys/dw-hdmi.c
>> +++ b/drivers/gpu/drm/bridge/synopsys/dw-hdmi.c
>> @@ -36,7 +36,10 @@
>> #include "dw-hdmi.h"
>> #include "dw-hdmi-audio.h"
>>
>> +#include <media/cec-notifier.h>
>> +
>> #define DDC_SEGMENT_ADDR 0x30
>> +
>> #define HDMI_EDID_LEN 512
>>
>> enum hdmi_datamap {
>> @@ -175,6 +178,8 @@ struct dw_hdmi {
>> struct regmap *regm;
>> void (*enable_audio)(struct dw_hdmi *hdmi);
>> void (*disable_audio)(struct dw_hdmi *hdmi);
>> +
>> + struct cec_notifier *cec_notifier;
>> };
>>
>> #define HDMI_IH_PHY_STAT0_RX_SENSE \
>> @@ -1896,6 +1901,7 @@ static int dw_hdmi_connector_get_modes(struct drm_connector *connector)
>> hdmi->sink_is_hdmi = drm_detect_hdmi_monitor(edid);
>> hdmi->sink_has_audio = drm_detect_monitor_audio(edid);
>> drm_mode_connector_update_edid_property(connector, edid);
>> + cec_notifier_set_phys_addr_from_edid(hdmi->cec_notifier, edid);
>> ret = drm_add_edid_modes(connector, edid);
>> /* Store the ELD */
>> drm_edid_to_eld(connector, edid);
>> @@ -2119,11 +2125,16 @@ static irqreturn_t dw_hdmi_irq(int irq, void *dev_id)
>> * ask the source to re-read the EDID.
>> */
>> if (intr_stat &
>> - (HDMI_IH_PHY_STAT0_RX_SENSE | HDMI_IH_PHY_STAT0_HPD))
>> + (HDMI_IH_PHY_STAT0_RX_SENSE | HDMI_IH_PHY_STAT0_HPD)) {
>> __dw_hdmi_setup_rx_sense(hdmi,
>> phy_stat & HDMI_PHY_HPD,
>> phy_stat & HDMI_PHY_RX_SENSE);
>>
>> + if ((phy_stat & (HDMI_PHY_RX_SENSE | HDMI_PHY_HPD)) == 0)
>> + cec_notifier_set_phys_addr(hdmi->cec_notifier,
>> + CEC_PHYS_ADDR_INVALID);
>> + }
>> +
>> if (intr_stat & HDMI_IH_PHY_STAT0_HPD) {
>> dev_dbg(hdmi->dev, "EVENT=%s\n",
>> phy_int_pol & HDMI_PHY_HPD ? "plugin" : "plugout");
>> @@ -2376,6 +2387,12 @@ __dw_hdmi_probe(struct platform_device *pdev,
>> if (ret)
>> goto err_iahb;
>>
>> + hdmi->cec_notifier = cec_notifier_get(dev);
>> + if (!hdmi->cec_notifier) {
>> + ret = -ENOMEM;
>> + goto err_iahb;
>> + }
>> +
>> /*
>> * To prevent overflows in HDMI_IH_FC_STAT2, set the clk regenerator
>> * N and cts values before enabling phy
>> @@ -2452,6 +2469,9 @@ __dw_hdmi_probe(struct platform_device *pdev,
>> hdmi->ddc = NULL;
>> }
>>
>> + if (hdmi->cec_notifier)
>> + cec_notifier_put(hdmi->cec_notifier);
>> +
>> clk_disable_unprepare(hdmi->iahb_clk);
>> err_isfr:
>> clk_disable_unprepare(hdmi->isfr_clk);
>>
>
>
> _______________________________________________
> linux-arm-kernel mailing list
> linux-arm-kernel@lists.infradead.org
> http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
>
--
Qualcomm Innovation Center, Inc. is a member of Code Aurora Forum,
a Linux Foundation Collaborative Project
_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel
next prev parent reply other threads:[~2017-08-04 13:36 UTC|newest]
Thread overview: 26+ messages / expand[flat|nested] mbox.gz Atom feed top
2017-07-31 14:29 [PATCH v2 0/4] dw-hdmi CEC support Russell King - ARM Linux
2017-07-31 14:29 ` [PATCH v2 1/4] drm/bridge: dw-hdmi: add cec notifier support Russell King
2017-07-31 14:33 ` Neil Armstrong
2017-07-31 15:25 ` Hans Verkuil
2017-08-04 13:36 ` Archit Taneja [this message]
2017-08-05 9:23 ` Hans Verkuil
2017-08-07 3:59 ` Archit Taneja
2017-08-02 14:11 ` Laurent Pinchart
2017-08-02 14:17 ` Hans Verkuil
2017-08-02 17:44 ` Russell King - ARM Linux
2017-07-31 14:29 ` [PATCH v2 2/4] drm/bridge: dw-hdmi: add better clock disable control Russell King
2017-07-31 15:26 ` Hans Verkuil
2017-08-04 13:39 ` Archit Taneja
2017-07-31 14:29 ` [PATCH v2 3/4] drm/bridge: dw-hdmi: add cec driver Russell King
2017-07-31 15:35 ` Hans Verkuil
2017-08-01 22:32 ` Laurent Pinchart
2017-08-02 6:47 ` Hans Verkuil
2017-08-02 13:14 ` Laurent Pinchart
2017-08-02 13:27 ` Russell King - ARM Linux
2017-08-02 13:34 ` Hans Verkuil
2017-08-02 14:22 ` Laurent Pinchart
2017-08-02 17:43 ` Russell King - ARM Linux
2017-08-02 14:17 ` Neil Armstrong
2017-07-31 14:29 ` [PATCH v2 4/4] drm/bridge: dw-hdmi: remove CEC engine register definitions Russell King
2017-07-31 15:26 ` Hans Verkuil
2017-08-01 22:29 ` [PATCH v2 0/4] dw-hdmi CEC support Laurent Pinchart
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=b68d6c53-4028-b963-5298-696e759bfe19@codeaurora.org \
--to=architt@codeaurora.org \
--cc=Laurent.pinchart@ideasonboard.com \
--cc=dri-devel@lists.freedesktop.org \
--cc=hverkuil@xs4all.nl \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=rmk+kernel@armlinux.org.uk \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox