Re: [PATCH] drm: rcar-du: crtc: force depends on cmm

[Jackie Liu <liu.yun@linux.dev>]

在 2021/7/28 下午7:30, Laurent Pinchart 写道:
> On Wed, Jul 28, 2021 at 12:09:34PM +0100, Kieran Bingham wrote:
>> Hi Jackie,
>>
>> On 28/07/2021 10:57, Jackie Liu wrote:
>>> Hi Kieran.
>>>
>>> How about this.
>>>
>>> diff --git a/drivers/gpu/drm/rcar-du/Kconfig
>>> b/drivers/gpu/drm/rcar-du/Kconfig
>>> index b47e74421e34..14cf3e6415d7 100644
>>> --- a/drivers/gpu/drm/rcar-du/Kconfig
>>> +++ b/drivers/gpu/drm/rcar-du/Kconfig
>>> @@ -1,7 +1,7 @@
>>>   # SPDX-License-Identifier: GPL-2.0
>>>   config DRM_RCAR_DU
>>>          tristate "DRM Support for R-Car Display Unit"
>>> -       depends on DRM && OF
>>> +       depends on DRM && OF && m
>>>          depends on ARM || ARM64
>>>          depends on ARCH_RENESAS || COMPILE_TEST
>>>          imply DRM_RCAR_CMM
>>>
>>>
>>> Of course, this is not a good way, in fact, as long as rcar-du built-in,
>>> cmm must also be built-in, otherwise an error will be reported.
>>
>> Correct, ideally we should enforce that if the RCAR_DU is built in (y),
>> then the CMM can only be y/n and not m.
>>
>> I thought that the depends on DRM_RCAR_DU should do that, but it appears
>> it doesn't enforce the built-in rule to match...
>>
>>> Do you have a good way?
>>
>> Kconfig-language.rst says:
>>
>>    Note: If the combination of FOO=y and BAR=m causes a link error,
>>    you can guard the function call with IS_REACHABLE()::
>>
>>          foo_init()
>>          {
>>                  if (IS_REACHABLE(CONFIG_BAZ))
>>                          baz_register(&foo);
>>                  ...
>>          }
>>
>>
>> But that seems redundant, so I suspect we could/should change the
>> drivers/gpu/drm/rcar-du/rcar_cmm.h from:
>>
>>
>> #if IS_ENABLED(CONFIG_DRM_RCAR_CMM)
>> to
>> #if IS_REACHABLE(CONFIG_DRM_RCAR_CMM)
>>
>> ...
>>
>>
>> Seems odd that we might allow the module to be compiled at all if it
>> won't be reachable and that we can't enforce that at the KConfig level -
>> but at least IS_REACHABLE would prevent the linker error..
> 
> This has been discussed before:
> 
> https://lore.kernel.org/dri-devel/20200408202711.1198966-6-arnd@arndb.de/

Hi Laurent.

Thanks for tell me this.

-- 
Jackie Liu

> 
>>> 在 2021/7/28 下午4:58, Kieran Bingham 写道:
>>>> On 28/07/2021 09:42, Jackie Liu wrote:
>>>>> From: Jackie Liu <liuyun01@kylinos.cn>
>>>>>
>>>>> After the patch 78b6bb1d24db ("drm: rcar-du: crtc: Control CMM
>>>>> operations"),
>>>>> the cmm module must be included in the crtc. We cannot remove this
>>>>> configuration option separately. Therefore, simply linking them together
>>>>> is the best solution, otherwise some errors will be reported.
>>>>>
>>>>
>>>> Yikes, I'm sure we've had plenty of problems with the config options on
>>>> this module. The churn alone makes me wonder if it should just be part
>>>> of the overall module to simplify things... but...
>>>>
>>>>>    rcar_du_crtc.c:(.text+0x194): undefined reference to `rcar_cmm_setup'
>>>>>    rcar_du_crtc.c:(.text+0x11bc): undefined reference to
>>>>> `rcar_cmm_enable'
>>>>>    rcar_du_crtc.c:(.text+0x1604): undefined reference to
>>>>> `rcar_cmm_disable'
>>>>>    rcar_du_kms.c:(.text+0x768): undefined reference to `rcar_cmm_init'
>>>>
>>>> Those are guarded by #if IS_ENABLED in the header.
>>>>
>>>> So from that - perhaps we can assume that the config attempted here was
>>>> a built-in DU - but a module CMM which wouldn't be supported?
>>>>
>>>>
>>>>
>>>>> Fixes: 78b6bb1d24db ("rm: rcar-du: crtc: Control CMM operations")
>>>>
>>>> That fixes tag is missing a 'd', but that's trivial.
>>>>
>>>>
>>>>> Reported-by: kernel-bot <k2ci@kylinos.cn>
>>>>> Signed-off-by: Jackie Liu <liuyun01@kylinos.cn>
>>>>> ---
>>>>>    drivers/gpu/drm/rcar-du/Kconfig  | 8 --------
>>>>>    drivers/gpu/drm/rcar-du/Makefile | 2 +-
>>>>>    2 files changed, 1 insertion(+), 9 deletions(-)
>>>>>
>>>>> diff --git a/drivers/gpu/drm/rcar-du/Kconfig
>>>>> b/drivers/gpu/drm/rcar-du/Kconfig
>>>>> index b47e74421e34..bc71ad2a472f 100644
>>>>> --- a/drivers/gpu/drm/rcar-du/Kconfig
>>>>> +++ b/drivers/gpu/drm/rcar-du/Kconfig
>>>>> @@ -4,7 +4,6 @@ config DRM_RCAR_DU
>>>>>        depends on DRM && OF
>>>>>        depends on ARM || ARM64
>>>>>        depends on ARCH_RENESAS || COMPILE_TEST
>>>>> -    imply DRM_RCAR_CMM
>>>>>        imply DRM_RCAR_LVDS
>>>>>        select DRM_KMS_HELPER
>>>>>        select DRM_KMS_CMA_HELPER
>>>>> @@ -14,13 +13,6 @@ config DRM_RCAR_DU
>>>>>          Choose this option if you have an R-Car chipset.
>>>>>          If M is selected the module will be called rcar-du-drm.
>>>>>    -config DRM_RCAR_CMM
>>>>> -    tristate "R-Car DU Color Management Module (CMM) Support"
>>>>> -    depends on DRM && OF
>>>>> -    depends on DRM_RCAR_DU
>>>>> -    help
>>>>> -      Enable support for R-Car Color Management Module (CMM).
>>>>> -
>>>>
>>>> I suspect the issue lies somewhere in this config that the CMM is not
>>>> being enforced to be a built in when the DU is built in ?
>>>>
>>>>
>>>>>    config DRM_RCAR_DW_HDMI
>>>>>        tristate "R-Car Gen3 and RZ/G2 DU HDMI Encoder Support"
>>>>>        depends on DRM && OF
>>>>> diff --git a/drivers/gpu/drm/rcar-du/Makefile
>>>>> b/drivers/gpu/drm/rcar-du/Makefile
>>>>> index 4d1187ccc3e5..76ff2e15bc2d 100644
>>>>> --- a/drivers/gpu/drm/rcar-du/Makefile
>>>>> +++ b/drivers/gpu/drm/rcar-du/Makefile
>>>>> @@ -5,6 +5,7 @@ rcar-du-drm-y := rcar_du_crtc.o \
>>>>>             rcar_du_group.o \
>>>>>             rcar_du_kms.o \
>>>>>             rcar_du_plane.o \
>>>>> +         rcar_cmm.o
>>>>>      rcar-du-drm-$(CONFIG_DRM_RCAR_LVDS)    += rcar_du_of.o \
>>>>>                           rcar_du_of_lvds_r8a7790.dtb.o \
>>>>> @@ -15,7 +16,6 @@ rcar-du-drm-$(CONFIG_DRM_RCAR_LVDS)    +=
>>>>> rcar_du_of.o \
>>>>>    rcar-du-drm-$(CONFIG_DRM_RCAR_VSP)    += rcar_du_vsp.o
>>>>>    rcar-du-drm-$(CONFIG_DRM_RCAR_WRITEBACK) += rcar_du_writeback.o
>>>>>    -obj-$(CONFIG_DRM_RCAR_CMM)        += rcar_cmm.o
>>>>>    obj-$(CONFIG_DRM_RCAR_DU)        += rcar-du-drm.o
>>>>>    obj-$(CONFIG_DRM_RCAR_DW_HDMI)        += rcar_dw_hdmi.o
>>>>>    obj-$(CONFIG_DRM_RCAR_LVDS)        += rcar_lvds.o
>