[Bug 102511] RV770 error on change dpm balanced<->battery

[bugzilla-daemon@freedesktop.org]

[-- Attachment #1.1: Type: text/plain, Size: 3047 bytes --]

https://bugs.freedesktop.org/show_bug.cgi?id=102511

--- Comment #5 from Rob MacKinnon <rob.mackinnon@gmail.com> ---
Comments inline...

(In reply to Alex Deucher from comment #2)
> (In reply to Rob MacKinnon from comment #0)
> > * Actual Result:
> > - DPMS change level changes as expected.
> > - Dmesg:
> > [ 3302.814889] [drm:btc_dpm_set_power_state [radeon]] *ERROR*
> > rv770_restrict_performance_levels_before_switch failed
> > [ 3316.661933] [drm:btc_dpm_set_power_state [radeon]] *ERROR*
> > rv770_restrict_performance_levels_before_switch failed
> > 
> > * Expected result:
> > - DPMS change level changes as expected.
> > - No error messages in dmesg.
> 
> Are you actually experiencing any problems?  I think the error message may
> be harmless can could probably be removed.

The annoyance of the message is totally trivial, but I believe there is an
issue with the initial setting of the DPMS profile. Which I'll mention in the
next comment.

> > 
> > * Additional Info:
> > Also, not sure if this is related or not, when switching from "battery" to
> > "performance" there sometimes appears to be an initial clocking issue (which
> > I believe is related to #93753). Switching back and forth a few times seems
> > to clean it.  Unsure the cause.  Another note, upon further inspection of my
> 
> There is no real balanced state.  It's either battery or performance
> depending on whether the chip is on ac or dc power.  The only real states
> you can switch between are performance and battery.  I need to see the
> output of our dmesg with radeon.dpm=1 to see what states your vbios provides.

I believe you when you say that the `balanced` state is non-existent.  A check
after cold starting shows that `balanced` is the first profile being set:

# cat /sys/class/drm/card0/device/power_dpm_state
balanced

So I'm not sure where this profile is being set from.

> 
> > DPMS settings, I noticed the drastic differences between "balanced" and
> > "battery" `sclk`s. My understand (which could be faulty) is that `sclk`
> > drives the clocking for single displays, while `mclk` for multiple. My
> 
> sclk is the 3D engine clock.  mclk is the memory clock.  mclk switching is
> disabled when multiple displays are active since the switch has to happen
> during the display's vblank period otherwise you'd see display glitches. 
> With multiple displays, the vblank periods are not likely to align so mclk
> switching is disabled.

Thank you very much for clarifying the function of `sclk` vs `mclk`. That's
great info, I wish I'd been able to find it elsewhere. My google-fu was the
source of my original understanding (which as it turns out was completely
wrong).

Regardless, somewhere the `balanced` profile is getting pulled from with
greatly under valued 3D clocking value.  Is there a setting somewhere that I
can trace down where this invalid profile is being generated or referenced?

-- 
You are receiving this mail because:
You are the assignee for the bug.

[-- Attachment #1.2: Type: text/html, Size: 4209 bytes --]

[-- Attachment #2: Type: text/plain, Size: 160 bytes --]

_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel