[Bug 103881] New: HP Compaq dc5750 fails to resume from suspend

* [Bug 103881] New: HP Compaq dc5750 fails to resume from suspend
@ 2015-09-01 19:50 bugzilla-daemon
  2015-09-01 19:52 ` [Bug 103881] " bugzilla-daemon
                   ` (7 more replies)
  0 siblings, 8 replies; 9+ messages in thread
From: bugzilla-daemon @ 2015-09-01 19:50 UTC (permalink / raw)
  To: dri-devel

https://bugzilla.kernel.org/show_bug.cgi?id=103881

            Bug ID: 103881
           Summary: HP Compaq dc5750 fails to resume from suspend
           Product: Drivers
           Version: 2.5
    Kernel Version: 4.1.6.i386
          Hardware: All
                OS: Linux
              Tree: Mainline
            Status: NEW
          Severity: normal
          Priority: P1
         Component: Video(DRI - non Intel)
          Assignee: drivers_video-dri@kernel-bugs.osdl.org
          Reporter: jefferym@gmail.com
        Regression: No

Created attachment 186431
  --> https://bugzilla.kernel.org/attachment.cgi?id=186431&action=edit
Patch adding the dc5750 to the list of radeon rs4xxx quirks

The HP Compaq dc5750 is unable to resume from the suspend state. With the
system suspended and I press the power button on the front of the machine I
expect it to wake up. When the button is pressed the HDD and CD drive lights
activate briefly and the fan powers on. The video output does not appear to
resume and stays black. I have to hard power the system to bring it back.
Attempting to suspend/resume has this issue every time I have tried it.

I observed this behavior on kernels 4.1.6 and 4.0.5.

Setting devices in /sys/power/pm_debug resulted in the system failing to
resume.
The freezer method in /sys/power/pm_debug did not have an issue resuming.

I enabled /sys/power/pm_trace and after the hard boot I was able to find a
reasonable hash matches line: ' pci 0000:01:05.0: hash matches'. Additionally
/sys/power/pm_trace_dev_match was able to resolve this to `radeon`.

I was able to boot using a serial console and prevented the radeon driver from
loading. In this state it was able to suspend and resume properly. From this
state I let the radeon driver load again and the system would fail to resume
from suspend.

I was able to add this system to the list of RS480 quirks. The system was able
to suspend and resume normally with the change. It worked with the Xserver
running as well. It appears to be running normally. I have attached the patch I
tested against the 4.0.5 and 4.1.6 kernels.

Is there anything else I should test?

-- 
You are receiving this mail because:
You are watching the assignee of the bug.
_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
http://lists.freedesktop.org/mailman/listinfo/dri-devel

^ permalink raw reply	[flat|nested] 9+ messages in thread