Comment=
# 2
on bug 67002<=
/a>
from jackdachef@=
;gmail.com
(In reply to comment #1=
)
> Can you retry with current drm-fixes? There has =
been a fix which might help
> at least for the UVD errors.
sure:
uvd seems to have initialized better/correctly now:
[ 33.640580] [drm] radeon kernel modesetting enabled.
[ 33.640868] [drm] initializing kernel modesetting (CYPRESS 0x1002:0x6899
0x1002:0x0B00).
[ 33.640886] [drm] register mmio base: 0xFBCE0000
[ 33.640887] [drm] register mmio size: 131072
[ 33.640931] ATOM BIOS: CYPRESS
[ 33.641006] radeon 0000:01:00.0: VRAM: 1024M 0x0000000000000000 -
0x000000003FFFFFFF (1024M used)
[ 33.641008] radeon 0000:01:00.0: GTT: 512M 0x0000000040000000 -
0x000000005FFFFFFF
[ 33.641009] [drm] Detected VRAM RAM=3D1024M, BAR=3D256M
[ 33.641010] [drm] RAM width 256bits DDR
[ 33.641089] [TTM] Zone kernel: Available graphics memory: 4077798 kiB
[ 33.641090] [TTM] Zone dma32: Available graphics memory: 2097152 kiB
[ 33.641091] [TTM] Initializing pool allocator
[ 33.641094] [TTM] Initializing DMA pool allocator
[ 33.641105] [drm] radeon: 1024M of VRAM memory ready
[ 33.641106] [drm] radeon: 512M of GTT memory ready.
[ 33.683758] [drm] GART: num cpu pages 131072, num gpu pages 131072
[ 33.684468] [drm] enabling PCIE gen 2 link speeds, disable with
radeon.pcie_gen2=3D0
[ 33.684507] [drm] Loading CYPRESS Microcode
[ 33.761563] [drm] PCIE GART of 512M enabled (table at 0x000000000025D000=
).
[ 33.761693] radeon 0000:01:00.0: WB enabled
[ 33.761695] radeon 0000:01:00.0: fence driver on ring 0 use gpu addr
0x0000000040000c00 and cpu addr 0xffff880234b81c00
[ 33.761696] radeon 0000:01:00.0: fence driver on ring 3 use gpu addr
0x0000000040000c0c and cpu addr 0xffff880234b81c0c
[ 33.761699] radeon 0000:01:00.0: fence driver on ring 5 use gpu addr
0x000000000005c418 and cpu addr 0xffffc9001351c418
[ 33.761701] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
[ 33.761702] [drm] Driver supports precise vblank timestamp query.
[ 33.761717] radeon 0000:01:00.0: irq 57 for MSI/MSI-X
[ 33.761728] radeon 0000:01:00.0: radeon: using MSI.
[ 33.761750] [drm] radeon: irq initialized.
[ 33.778505] [drm] ring test on 0 succeeded in 1 usecs
[ 33.778563] [drm] ring test on 3 succeeded in 1 usecs
[ 33.967467] [drm] ring test on 5 succeeded in 1 usecs
[ 33.967471] [drm] UVD initialized successfully.
[ 33.967667] [drm] ib test on ring 0 succeeded in 0 usecs
[ 33.967695] [drm] ib test on ring 3 succeeded in 0 usecs
[ 34.123160] [drm] ib test on ring 5 succeeded
[ 34.123540] [drm] Radeon Display Connectors
[ 34.123541] [drm] Connector 0:
[ 34.123542] [drm] DP-1
[ 34.123543] [drm] HPD4
[ 34.123544] [drm] DDC: 0x6430 0x6430 0x6434 0x6434 0x6438 0x6438 0x643c
0x643c
[ 34.123545] [drm] Encoders:
[ 34.123546] [drm] DFP1: INTERNAL_UNIPHY2
[ 34.123547] [drm] Connector 1:
[ 34.123548] [drm] HDMI-A-1
[ 34.123548] [drm] HPD5
[ 34.123550] [drm] DDC: 0x6460 0x6460 0x6464 0x6464 0x6468 0x6468 0x646c
0x646c
[ 34.123550] [drm] Encoders:
[ 34.123551] [drm] DFP2: INTERNAL_UNIPHY2
[ 34.123552] [drm] Connector 2:
[ 34.123553] [drm] DVI-I-1
[ 34.123553] [drm] HPD1
[ 34.123554] [drm] DDC: 0x6450 0x6450 0x6454 0x6454 0x6458 0x6458 0x645c
0x645c
[ 34.123555] [drm] Encoders:
[ 34.123556] [drm] DFP3: INTERNAL_UNIPHY1
[ 34.123557] [drm] CRT2: INTERNAL_KLDSCP_DAC2
[ 34.123558] [drm] Connector 3:
[ 34.123558] [drm] DVI-I-2
[ 34.123559] [drm] HPD6
[ 34.123560] [drm] DDC: 0x6470 0x6470 0x6474 0x6474 0x6478 0x6478 0x647c
0x647c
[ 34.123561] [drm] Encoders:
[ 34.123562] [drm] DFP4: INTERNAL_UNIPHY
[ 34.123563] [drm] CRT1: INTERNAL_KLDSCP_DAC1
[ 34.123606] [drm] Internal thermal controller with fan control
[ 34.123628] =3D=3D power state 0 =3D=3D
[ 34.123630] ui class: none
[ 34.123631] internal class: boot=20
[ 34.123632] caps: video=20
[ 34.123634] uvd vclk: 0 dclk: 0
[ 34.123635] power level 0 sclk: 40000 mclk: 90000 vddc: 1000
vddci: 0
[ 34.123636] power level 1 sclk: 40000 mclk: 90000 vddc: 1000
vddci: 0
[ 34.123637] power level 2 sclk: 40000 mclk: 90000 vddc: 1000
vddci: 0
[ 34.123638] status: c r b=20
[ 34.123639] =3D=3D power state 1 =3D=3D
[ 34.123640] ui class: performance
[ 34.123641] internal class: none
[ 34.123642] caps: single_disp video=20
[ 34.123644] uvd vclk: 0 dclk: 0
[ 34.123645] power level 0 sclk: 15700 mclk: 30000 vddc: 950
vddci: 1100
[ 34.123646] power level 1 sclk: 55000 mclk: 90000 vddc: 1038
vddci: 1100
[ 34.123647] power level 2 sclk: 72500 mclk: 100000 vddc: 1088
vddci: 1100
[ 34.123647] status:=20
[ 34.123648] =3D=3D power state 2 =3D=3D
[ 34.123649] ui class: none
[ 34.123650] internal class: uvd=20
[ 34.123651] caps: video=20
[ 34.123652] uvd vclk: 54000 dclk: 40000
[ 34.123653] power level 0 sclk: 40000 mclk: 90000 vddc: 1000
vddci: 1100
[ 34.123654] power level 1 sclk: 40000 mclk: 90000 vddc: 1000
vddci: 1100
[ 34.123655] power level 2 sclk: 40000 mclk: 90000 vddc: 1000
vddci: 1100
[ 34.123656] status:=20
[ 34.123657] =3D=3D power state 3 =3D=3D
[ 34.123657] ui class: performance
[ 34.123658] internal class: none
[ 34.123659] caps: video=20
[ 34.123660] uvd vclk: 0 dclk: 0
[ 34.123661] power level 0 sclk: 40000 mclk: 100000 vddc: 1000
vddci: 1100
[ 34.123662] power level 1 sclk: 55000 mclk: 100000 vddc: 1038
vddci: 1100
[ 34.123663] power level 2 sclk: 72500 mclk: 100000 vddc: 1088
vddci: 1100
[ 34.123664] status:=20
[ 34.123665] =3D=3D power state 4 =3D=3D
[ 34.123666] ui class: none
[ 34.123666] internal class: acpi=20
[ 34.123667] caps:=20
[ 34.123669] uvd vclk: 0 dclk: 0
[ 34.123670] power level 0 sclk: 15700 mclk: 30000 vddc: 950
vddci: 1100
[ 34.123671] power level 1 sclk: 15700 mclk: 30000 vddc: 950
vddci: 1100
[ 34.123672] power level 2 sclk: 15700 mclk: 30000 vddc: 950
vddci: 1100
[ 34.123672] status:=20
[ 34.128809] switching from power state:
[ 34.128811] ui class: none
[ 34.128812] internal class: boot=20
[ 34.128813] caps: video=20
[ 34.128814] uvd vclk: 0 dclk: 0
[ 34.128815] power level 0 sclk: 40000 mclk: 90000 vddc: 1000
vddci: 0
[ 34.128816] power level 1 sclk: 40000 mclk: 90000 vddc: 1000
vddci: 0
[ 34.128817] power level 2 sclk: 40000 mclk: 90000 vddc: 1000
vddci: 0
[ 34.128818] status: c b=20
[ 34.128819] switching to power state:
[ 34.128820] ui class: performance
[ 34.128821] internal class: none
[ 34.128822] caps: single_disp video=20
[ 34.128823] uvd vclk: 0 dclk: 0
[ 34.128824] power level 0 sclk: 15700 mclk: 30000 vddc: 950
vddci: 1100
[ 34.128825] power level 1 sclk: 55000 mclk: 90000 vddc: 1038
vddci: 1100
[ 34.128826] power level 2 sclk: 72500 mclk: 100000 vddc: 1088
vddci: 1100
[ 34.128827] status: r=20
[ 34.134851] [drm] radeon: dpm initialized
[ 34.214869] [drm] fb mappable at 0xD035F000
[ 34.214871] [drm] vram apper at 0xD0000000
[ 34.214873] [drm] size 8294400
[ 34.214873] [drm] fb depth is 24
[ 34.214874] [drm] pitch is 7680
[ 34.214909] fbcon: radeondrmfb (fb0) is primary device
[ 34.239815] Console: switching to colour frame buffer device 240x67
[ 34.243830] radeon 0000:01:00.0: fb0: radeondrmfb frame buffer device
[ 34.243831] radeon 0000:01:00.0: registered panic notifier
[ 34.243834] [drm] Initialized radeon 2.34.0 20080528 for 0000:01:00.0 on
minor 0
I gave it some testing (several videos played back, mkv, Avatar and Tron Le=
gacy
for some minutes) via vdpau (smplayer),=20
with
echo auto > /sys/class/drm/card0/device/power_dpm_force_performance_level
and
echo low > /sys/class/drm/card0/device/power_dpm_force_performance_level
used the composited desktop, and did some web-browsing with chromium
(pepperflash) and firefox 64bit (adobe-flash via vdpau) and watched some
youtube videos
looked stable to me,
[note (if I forget it to poster later in this entry): chromium is using gpu
compositing - which might trigger and might have triggered the gpu lock &am=
p;
hardlock this time]
so far - so good
for data integrity & safety reasons I quit X and tried out suspend-to-r=
am and
resume:
from VT1:
pm-suspend --quirk-dpms-on --quirk-s3-mode --quirk-vbe-post --quirk-vga-mod=
e3 &
vlock
delayed suspend switch and wakeup (as usual & observed from last time):
output from dmesg:
[ 4487.786933] [drm] enabling PCIE gen 2 link speeds, disable with
radeon.pcie_gen2=3D0
[ 4487.789211] [drm] PCIE GART of 512M enabled (table at 0x000000000025D000=
).
[ 4487.789561] radeon 0000:01:00.0: WB enabled
[ 4487.789563] radeon 0000:01:00.0: fence driver on ring 0 use gpu addr
0x0000000040000c00 and cpu addr 0xffff880234b81c00
[ 4487.789564] radeon 0000:01:00.0: fence driver on ring 3 use gpu addr
0x0000000040000c0c and cpu addr 0xffff880234b81c0c
[ 4487.790405] radeon 0000:01:00.0: fence driver on ring 5 use gpu addr
0x000000000005c418 and cpu addr 0xffffc9001351c418
[ 4487.806998] [drm] ring test on 0 succeeded in 1 usecs
[ 4487.807056] [drm] ring test on 3 succeeded in 1 usecs
[ 4488.017296] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 4488.021126] ata2.00: configured for UDMA/100
[ 4488.022363] ata4: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 4488.028358] ata8: SATA link down (SStatus 0 SControl 300)
[ 4488.028390] ata7: SATA link down (SStatus 0 SControl 300)
[ 4488.050196] ata4.00: configured for UDMA/100
[ 4488.984442] [drm:r600_uvd_init] *ERROR* UVD not responding, trying to re=
set
the VCPU!!!
[ 4489.333196] e1000e: eth0 NIC Link is Up 100 Mbps Full Duplex, Flow Contr=
ol:
Rx
[ 4489.333302] e1000e 0000:00:19.0 eth0: 10/100 speed: disabling TSO
[ 4490.005567] [drm:r600_uvd_init] *ERROR* UVD not responding, trying to re=
set
the VCPU!!!
[ 4491.026691] [drm:r600_uvd_init] *ERROR* UVD not responding, trying to re=
set
the VCPU!!!
[ 4492.047816] [drm:r600_uvd_init] *ERROR* UVD not responding, trying to re=
set
the VCPU!!!
[ 4493.068940] [drm:r600_uvd_init] *ERROR* UVD not responding, trying to re=
set
the VCPU!!!
[ 4493.074353] ata1: link is slow to respond, please be patient (ready=3D0)
[ 4493.078357] ata3: link is slow to respond, please be patient (ready=3D0)
[ 4493.080359] ata5: link is slow to respond, please be patient (ready=3D0)
[ 4493.082360] ata6: link is slow to respond, please be patient (ready=3D0)
[ 4494.090065] [drm:r600_uvd_init] *ERROR* UVD not responding, trying to re=
set
the VCPU!!!
[ 4495.111189] [drm:r600_uvd_init] *ERROR* UVD not responding, trying to re=
set
the VCPU!!!
[ 4496.132314] [drm:r600_uvd_init] *ERROR* UVD not responding, trying to re=
set
the VCPU!!!
[ 4497.153481] [drm:r600_uvd_init] *ERROR* UVD not responding, trying to re=
set
the VCPU!!!
[ 4497.771073] ata1: COMRESET failed (errno=3D-16)
[ 4497.775081] ata3: COMRESET failed (errno=3D-16)
[ 4497.777085] ata5: COMRESET failed (errno=3D-16)
[ 4497.779160] ata6: COMRESET failed (errno=3D-16)
[ 4498.174616] [drm:r600_uvd_init] *ERROR* UVD not responding, trying to re=
set
the VCPU!!!
[ 4498.194639] [drm:r600_uvd_init] *ERROR* UVD not responding, giving up!!!
[ 4498.194642] [drm:evergreen_startup] *ERROR* radeon: error initializing U=
VD
(-1).
[ 4498.194675] [drm] ib test on ring 0 succeeded in 0 usecs
[ 4498.194707] [drm] ib test on ring 3 succeeded in 1 usecs
[ 4498.199776] switching from power state:
[ 4498.199777] ui class: none
[ 4498.199778] internal class: boot=20
[ 4498.199779] caps: video=20
[ 4498.199779] uvd vclk: 0 dclk: 0
[ 4498.199780] power level 0 sclk: 40000 mclk: 90000 vddc: 1000
vddci: 0
[ 4498.199781] power level 1 sclk: 40000 mclk: 90000 vddc: 1000
vddci: 0
[ 4498.199781] power level 2 sclk: 40000 mclk: 90000 vddc: 1000
vddci: 0
[ 4498.199782] status: c b=20
[ 4498.199782] switching to power state:
[ 4498.199782] ui class: performance
[ 4498.199783] internal class: none
[ 4498.199784] caps: single_disp video=20
[ 4498.199784] uvd vclk: 0 dclk: 0
[ 4498.199785] power level 0 sclk: 15700 mclk: 30000 vddc: 950
vddci: 1100
[ 4498.199785] power level 1 sclk: 55000 mclk: 90000 vddc: 1038
vddci: 1100
[ 4498.199786] power level 2 sclk: 72500 mclk: 100000 vddc: 1088
vddci: 1100
[ 4498.199786] status: r=20
[ 4499.462782] ata6: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 4499.475045] ata6.00: configured for UDMA/133
[ 4499.485899] sd 5:0:0:0: [sdd] Starting disk
[ 4499.662989] ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 4499.692137] ata3.00: configured for UDMA/133
[ 4499.703084] sd 2:0:0:0: [sdb] Starting disk
[ 4501.502837] ata5: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 4501.523748] ata5.00: configured for UDMA/133
[ 4501.533954] sd 4:0:0:0: [sdc] Starting disk
[ 4502.364726] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 4502.407461] ata1.00: configured for UDMA/133
[ 4502.417816] sd 0:0:0:0: [sda] Starting disk
[ 4503.310597] [drm:atom_op_jump] *ERROR* atombios stuck in loop for more t=
han
5secs aborting
[ 4503.310599] [drm:atom_execute_table_locked] *ERROR* atombios stuck execu=
ting
D3DE (len 55, WS 0, PS 0) @ 0xD401
[ 4503.330289] PM: resume of devices complete after 15602.288 msecs
<=3D=3D note the error messages in dmesg output after resume about atomb=
ios & uvd
several times typed in dmesg to make sure that showing dmesg-output doesn't
lead to X crash, gpu lock, etc.
following things could be observed:
*) dmesg didn't lead to gpu lock or X crash anymore
*) composited desktop (compiz-fusion) was running fluid after the resume:
expos=C3=A9-like feature worked, zooming in, zooming out, invert screen/col=
ors -
worked fine so far (can't remember if I minimized windows - at least maximi=
zing
also worked)
*) fired up chromium, did some little browsing and wanted to surf over to t=
his
bug-entry to report - then it hardlocked
the box wouldn't react to magic sysrq key, toggling num lock, caps lock, et=
c. -
no sign of life from the keyboard either
fans on the gpu didn't spin up faster (e.g. like with old non-DPM driver,
static profiles when it locked up), fan of the PC/power supply or cpu fan a=
lso
didn't seem to spin up faster)
currently I'm more worried about it locking up hard than the UVD issues (I'm
not fully trusting brfs on my /home partition yet - otherwise I would try
suspending from within X & Xfce)
hope you can fix the issue with atombios looping & *ERROR* atombios stu=
ck
executing D3DE (len 55, WS 0, PS 0) @ 0xD401 - that currently worries m=
e the
most, as far as I remember that didn't occur with the old driver static
implementation (might have to investigate this ...)
looking through this text again: could gpu compositing from chromium be the
reason the it hardlocks ?
figuratively speaking: that finishes off the gpu after these errors ? or is=
it
completely unrelated
anyway - thanks for your continued efforts :)