From: bugzilla-daemon@bugzilla.kernel.org
To: dri-devel@lists.freedesktop.org
Subject: [Bug 71891] New: 3.13 fails to boot with the radeon module
Date: Tue, 11 Mar 2014 14:14:58 +0000 [thread overview]
Message-ID: <bug-71891-2300@https.bugzilla.kernel.org/> (raw)
https://bugzilla.kernel.org/show_bug.cgi?id=71891
Bug ID: 71891
Summary: 3.13 fails to boot with the radeon module
Product: Drivers
Version: 2.5
Kernel Version: 3.13.6-1-ARCH
Hardware: x86-64
OS: Linux
Tree: Mainline
Status: NEW
Severity: high
Priority: P1
Component: Video(DRI - non Intel)
Assignee: drivers_video-dri@kernel-bugs.osdl.org
Reporter: sh.siddhartha@gmail.com
Regression: No
$ lspci -k | grep -A3 VGA
01:00.0 VGA compatible controller: Advanced Micro Devices, Inc. [AMD/ATI]
RV730/M96 [Mobility Radeon HD 4650/5165]
Subsystem: Dell Device 0447
Kernel driver in use: fglrx_pci
Kernel modules: radeon, fglrx
Dell Inspiron N5010 (BIOS)
Legacy catalyst works properly. Using the open source radeon driver either
boots to tty login with above errors, or boots to a locked up black screen.
drm syslog:
[drm] Initialized drm 1.1.0 20060810
[drm] radeon kernel modesetting enabled.
fb: conflicting fb hw usage radeondrmfb vs VESA VGA - removing generic driver
[drm] initializing kernel modesetting (RV730 0x1002:0x9480 0x1028:0x0447).
[drm] register mmio base: 0xFBE20000
[drm] register mmio size: 65536
[drm] Detected VRAM RAM=1024M, BAR=256M
[drm] RAM width 128bits DDR
[drm] radeon: 1024M of VRAM memory ready
[drm] radeon: 1024M of GTT memory ready.
[drm] GART: num cpu pages 262144, num gpu pages 262144
[drm] Loading RV730 Microcode
[drm] PCIE GART of 1024M enabled (table at 0x000000000025D000).
[drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[drm] Driver supports precise vblank timestamp query.
[drm] radeon: irq initialized.
[drm] ring test on 0 succeeded in 1 usecs
[drm] ring test on 3 succeeded in 1 usecs
[drm:uvd_v1_0_start] *ERROR* UVD not responding, trying to reset the VCPU!!!
[drm:uvd_v1_0_start] *ERROR* UVD not responding, trying to reset the VCPU!!!
[drm:uvd_v1_0_start] *ERROR* UVD not responding, trying to reset the VCPU!!!
[drm:uvd_v1_0_start] *ERROR* UVD not responding, trying to reset the VCPU!!!
[drm:uvd_v1_0_start] *ERROR* UVD not responding, trying to reset the VCPU!!!
[drm:uvd_v1_0_start] *ERROR* UVD not responding, trying to reset the VCPU!!!
[drm:uvd_v1_0_start] *ERROR* UVD not responding, trying to reset the VCPU!!!
[drm:uvd_v1_0_start] *ERROR* UVD not responding, trying to reset the VCPU!!!
[drm:uvd_v1_0_start] *ERROR* UVD not responding, trying to reset the VCPU!!!
[drm:uvd_v1_0_start] *ERROR* UVD not responding, trying to reset the VCPU!!!
[drm:uvd_v1_0_start] *ERROR* UVD not responding, giving up!!!
[drm:rv770_startup] *ERROR* radeon: failed initializing UVD (-1).
[drm] Enabling audio 0 support
[drm] ib test on ring 0 succeeded in 0 usecs
[drm] ib test on ring 3 succeeded in 0 usecs
[drm] radeon atom DIG backlight initialized
[drm] Radeon Display Connectors
[drm] Connector 0:
[drm] VGA-1
[drm] DDC: 0x7e40 0x7e40 0x7e44 0x7e44 0x7e48 0x7e48 0x7e4c 0x7e4c
[drm] Encoders:
[drm] CRT1: INTERNAL_KLDSCP_DAC1
[drm] Connector 1:
[drm] HDMI-A-1
[drm] HPD1
[drm] DDC: 0x7e50 0x7e50 0x7e54 0x7e54 0x7e58 0x7e58 0x7e5c 0x7e5c
[drm] Encoders:
[drm] DFP1: INTERNAL_UNIPHY
[drm] Connector 2:
[drm] LVDS-1
[drm] DDC: 0x7f68 0x7f68 0x7f6c 0x7f6c 0x7f70 0x7f70 0x7f74 0x7f74
[drm] Encoders:
[drm] LCD1: INTERNAL_UNIPHY2
[drm] Internal thermal controller with fan control
[drm] radeon: dpm initialized
[drm] fb mappable at 0xC045E000
[drm] vram apper at 0xC0000000
[drm] size 4325376
[drm] fb depth is 24
[drm] pitch is 5632
fbcon: radeondrmfb (fb0) is primary device
[drm:rv770_dpm_set_power_state] *ERROR*
rv770_restrict_performance_levels_before_switch failed
radeon 0000:01:00.0: fb0: radeondrmfb frame buffer device
[drm] Initialized radeon 2.36.0 20080528 for 0000:01:00.0 on minor 0
--
You are receiving this mail because:
You are watching the assignee of the bug.
next reply other threads:[~2014-03-11 14:15 UTC|newest]
Thread overview: 52+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-03-11 14:14 bugzilla-daemon [this message]
2014-03-11 14:19 ` [Bug 71891] 3.13 fails to boot with the radeon module bugzilla-daemon
2014-03-11 14:53 ` bugzilla-daemon
2014-03-11 15:46 ` bugzilla-daemon
2014-03-11 16:22 ` bugzilla-daemon
2014-04-06 15:22 ` bugzilla-daemon
2014-04-06 15:35 ` bugzilla-daemon
2014-04-06 18:23 ` bugzilla-daemon
2014-04-06 18:50 ` bugzilla-daemon
2014-04-10 9:57 ` bugzilla-daemon
2014-04-10 14:12 ` bugzilla-daemon
2014-04-12 8:59 ` bugzilla-daemon
2014-04-12 9:25 ` bugzilla-daemon
2014-04-12 10:18 ` bugzilla-daemon
2014-04-12 10:27 ` bugzilla-daemon
2014-04-12 18:12 ` bugzilla-daemon
2014-04-15 7:29 ` bugzilla-daemon
2014-04-18 14:15 ` bugzilla-daemon
2014-04-19 10:25 ` bugzilla-daemon
2014-04-19 13:58 ` bugzilla-daemon
2014-04-24 3:06 ` bugzilla-daemon
2014-04-24 7:58 ` bugzilla-daemon
2014-04-24 8:58 ` bugzilla-daemon
2014-04-24 11:59 ` bugzilla-daemon
2014-04-26 1:35 ` bugzilla-daemon
2014-04-26 8:40 ` bugzilla-daemon
2014-04-27 0:12 ` bugzilla-daemon
2014-04-27 5:52 ` bugzilla-daemon
2014-04-29 13:51 ` bugzilla-daemon
2014-04-29 13:55 ` bugzilla-daemon
2014-05-06 5:15 ` bugzilla-daemon
2014-05-12 5:25 ` bugzilla-daemon
2014-05-12 7:42 ` bugzilla-daemon
2014-05-12 14:59 ` bugzilla-daemon
2014-05-12 15:11 ` bugzilla-daemon
2014-05-12 17:07 ` bugzilla-daemon
2014-05-12 18:21 ` bugzilla-daemon
2014-05-13 5:44 ` bugzilla-daemon
2014-06-26 0:14 ` bugzilla-daemon
2014-06-26 8:21 ` bugzilla-daemon
2014-07-03 15:11 ` bugzilla-daemon
2014-07-04 13:08 ` bugzilla-daemon
2014-07-04 13:16 ` bugzilla-daemon
2014-08-15 12:51 ` bugzilla-daemon
2014-08-15 15:08 ` bugzilla-daemon
2014-10-29 18:08 ` bugzilla-daemon
2014-10-29 19:21 ` bugzilla-daemon
2015-06-03 6:57 ` bugzilla-daemon
2015-06-03 12:48 ` bugzilla-daemon
2016-09-20 1:28 ` bugzilla-daemon
2016-09-20 1:45 ` bugzilla-daemon
2020-06-08 10:26 ` bugzilla-daemon
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=bug-71891-2300@https.bugzilla.kernel.org/ \
--to=bugzilla-daemon@bugzilla.kernel.org \
--cc=dri-devel@lists.freedesktop.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).