* [Bug 72648] New: All 3 monitor EDIDs show the same
@ 2013-12-12 19:27 bugzilla-daemon
2013-12-12 20:53 ` [Bug 72648] " bugzilla-daemon
` (11 more replies)
0 siblings, 12 replies; 13+ messages in thread
From: bugzilla-daemon @ 2013-12-12 19:27 UTC (permalink / raw)
To: dri-devel
[-- Attachment #1.1: Type: text/plain, Size: 14791 bytes --]
https://bugs.freedesktop.org/show_bug.cgi?id=72648
Priority: medium
Bug ID: 72648
Assignee: dri-devel@lists.freedesktop.org
Summary: All 3 monitor EDIDs show the same
Severity: normal
Classification: Unclassified
OS: All
Reporter: jim.cromie@gmail.com
Hardware: Other
Status: NEW
Version: XOrg CVS
Component: DRM/Radeon
Product: DRI
I recently bought a 3rd monitor, plugged it to my radeon,
turns out its EDID is bad; it caused 2 of 3 monitors
to go to low-res, which Id reboot to correct (ick)
I fixed that with
drm_kms_helper.edid_firmware=VGA-1:edid/1920x1080.bin
.. which is nice, esp as its been available since 2012 :-)
what worries me is the following:
I have 3 different monitors on the 3 video connectors,
and dmesg (pasted below) confirms this.
[jimc@groucho 3.13.0-rc3-x2a-00174-g9538e10]$ for p in
/sys/class/drm/card0*/edid; do echo; echo $p; echo; monitor-edid $p ; done
/sys/class/drm/card0-DVI-D-1/edid
Name: X241W
EISA ID: ACRad99
EDID version: 1.3
EDID extension blocks: 0
Screen size: 51.8 cm x 32.4 cm (24.05 inches, aspect ratio 16/10 = 1.60)
Gamma: 2.2
Digital signal
Max video bandwidth: 170 MHz
HorizSync 31-81
VertRefresh 56-75
# Monitor preferred modeline (60.0 Hz vsync, 74.0 kHz hsync, ratio 16/10,
94 dpi)
ModeLine "1920x1200" 154 1920 1968 2000 2080 1200 1203 1209 1235 +hsync
+vsync
/sys/class/drm/card0-HDMI-A-1/edid
Name: X241W
EISA ID: ACRad99
EDID version: 1.3
EDID extension blocks: 0
Screen size: 51.8 cm x 32.4 cm (24.05 inches, aspect ratio 16/10 = 1.60)
Gamma: 2.2
Digital signal
Max video bandwidth: 170 MHz
HorizSync 31-81
VertRefresh 56-75
# Monitor preferred modeline (60.0 Hz vsync, 74.0 kHz hsync, ratio 16/10,
94 dpi)
ModeLine "1920x1200" 154 1920 1968 2000 2080 1200 1203 1209 1235 +hsync
+vsync
/sys/class/drm/card0-VGA-1/edid
Name: X241W
EISA ID: ACRad99
EDID version: 1.3
EDID extension blocks: 0
Screen size: 51.8 cm x 32.4 cm (24.05 inches, aspect ratio 16/10 = 1.60)
Gamma: 2.2
Digital signal
Max video bandwidth: 170 MHz
HorizSync 31-81
VertRefresh 56-75
# Monitor preferred modeline (60.0 Hz vsync, 74.0 kHz hsync, ratio 16/10,
94 dpi)
ModeLine "1920x1200" 154 1920 1968 2000 2080 1200 1203 1209 1235 +hsync
+vsync
heres that dmesg grep - Im using dpm, and enabled debug-prints
[jimc@groucho 3.13.0-rc3-x2a-00174-g9538e10]$ grep -E 'radeon|drm' dmesg
Command line: BOOT_IMAGE=/vmlinuz-3.13.0-rc3-x2a-00174-g9538e10
root=/dev/mapper/vg_groucho-lv_root ro quiet rhgb radeon.dyndbg radeon.dpm=-1
radeon.aspm=-1 printk.time=0 LANG=en_US.UTF-8
Kernel command line: BOOT_IMAGE=/vmlinuz-3.13.0-rc3-x2a-00174-g9538e10
root=/dev/mapper/vg_groucho-lv_root ro quiet rhgb radeon.dyndbg radeon.dpm=-1
radeon.aspm=-1 printk.time=0 LANG=en_US.UTF-8
[drm] Initialized drm 1.1.0 20060810
[drm] radeon kernel modesetting enabled.
[drm] initializing kernel modesetting (CEDAR 0x1002:0x68E1 0x1787:0x3000).
[drm] register mmio base: 0xFE9E0000
[drm] register mmio size: 131072
radeon 0000:01:00.0: VRAM: 1024M 0x0000000000000000 - 0x000000003FFFFFFF
(1024M used)
radeon 0000:01:00.0: GTT: 1024M 0x0000000040000000 - 0x000000007FFFFFFF
[drm] Detected VRAM RAM=1024M, BAR=256M
[drm] RAM width 64bits DDR
[drm] radeon: 1024M of VRAM memory ready
[drm] radeon: 1024M of GTT memory ready.
[drm] GART: num cpu pages 262144, num gpu pages 262144
[drm] enabling PCIE gen 2 link speeds, disable with radeon.pcie_gen2=0
[drm] Loading CEDAR Microcode
[drm] PCIE GART of 1024M enabled (table at 0x000000000025D000).
radeon 0000:01:00.0: WB enabled
radeon 0000:01:00.0: fence driver on ring 0 use gpu addr 0x0000000040000c00
and cpu addr 0xffff880221ba2c00
radeon 0000:01:00.0: fence driver on ring 3 use gpu addr 0x0000000040000c0c
and cpu addr 0xffff880221ba2c0c
radeon 0000:01:00.0: fence driver on ring 5 use gpu addr 0x000000000005c418
and cpu addr 0xffffc90010f1c418
[drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[drm] Driver supports precise vblank timestamp query.
radeon 0000:01:00.0: irq 42 for MSI/MSI-X
radeon 0000:01:00.0: radeon: using MSI.
[drm] radeon: irq initialized.
[drm] ring test on 0 succeeded in 1 usecs
[drm] ring test on 3 succeeded in 1 usecs
[drm] ring test on 5 succeeded in 1 usecs
[drm] UVD initialized successfully.
[drm] Enabling audio 0 support
[drm] ib test on ring 0 succeeded in 0 usecs
[drm] ib test on ring 3 succeeded in 0 usecs
[drm] ib test on ring 5 succeeded
[drm] Radeon Display Connectors
[drm] Connector 0:
[drm] HDMI-A-1
[drm] HPD2
[drm] DDC: 0x6460 0x6460 0x6464 0x6464 0x6468 0x6468 0x646c 0x646c
[drm] Encoders:
[drm] DFP1: INTERNAL_UNIPHY1
[drm] Connector 1:
[drm] DVI-D-1
[drm] HPD4
[drm] DDC: 0x6440 0x6440 0x6444 0x6444 0x6448 0x6448 0x644c 0x644c
[drm] Encoders:
[drm] DFP2: INTERNAL_UNIPHY
[drm] Connector 2:
[drm] VGA-1
[drm] DDC: 0x6430 0x6430 0x6434 0x6434 0x6438 0x6438 0x643c 0x643c
[drm] Encoders:
[drm] CRT1: INTERNAL_KLDSCP_DAC1
[drm] Internal thermal controller with fan control
[drm] radeon: dpm initialized
[drm] fb mappable at 0xD0460000
[drm] vram apper at 0xD0000000
[drm] size 9216000
[drm] fb depth is 24
[drm] pitch is 7680
fbcon: radeondrmfb (fb0) is primary device
radeon 0000:01:00.0: fb0: radeondrmfb frame buffer device
radeon 0000:01:00.0: registered panic notifier
[drm] Initialized radeon 2.35.0 20080528 for 0000:01:00.0 on minor 0
[drm:drm_edid_block_valid] *ERROR* EDID checksum is invalid, remainder is 251
[drm:drm_edid_block_valid] *ERROR* EDID checksum is invalid, remainder is 244
[drm:drm_edid_block_valid] *ERROR* EDID checksum is invalid, remainder is 87
[drm:drm_edid_block_valid] *ERROR* EDID checksum is invalid, remainder is 241
[drm:drm_edid_block_valid] *ERROR* EDID checksum is invalid, remainder is 200
radeon 0000:01:00.0: VGA-1: EDID block 0 invalid.
[drm:radeon_vga_detect] *ERROR* VGA-1: probed a monitor but no|invalid EDID
[drm:radeon_vga_detect] *ERROR* VGA-1: probed a monitor but no|invalid EDID
[drm:radeon_atom_pick_pll] *ERROR* unable to allocate a PPLL
[drm:drm_crtc_helper_set_config] *ERROR* failed to set mode on [CRTC:12]
[drm:radeon_vga_detect] *ERROR* VGA-1: probed a monitor but no|invalid EDID
[drm:radeon_vga_detect] *ERROR* VGA-1: probed a monitor but no|invalid EDID
[drm:radeon_atom_pick_pll] *ERROR* unable to allocate a PPLL
[drm:drm_crtc_helper_set_config] *ERROR* failed to set mode on [CRTC:13]
[drm:radeon_atom_pick_pll] *ERROR* unable to allocate a PPLL
[drm:drm_crtc_helper_set_config] *ERROR* failed to set mode on [CRTC:14]
[drm:radeon_vga_detect] *ERROR* VGA-1: probed a monitor but no|invalid EDID
radeon 0000:01:00.0: GPU lockup CP stall for more than 10017msec
radeon 0000:01:00.0: GPU lockup (waiting for 0x000000000000006b last fence id
0x0000000000000069 on ring 0)
[drm:rv770_stop_dpm] *ERROR* Could not force DPM to low.
[drm] Disabling audio 0 support
radeon 0000:01:00.0: Saved 55 dwords of commands on ring 0.
radeon 0000:01:00.0: GPU softreset: 0x00000008
radeon 0000:01:00.0: GRBM_STATUS = 0xA0003828
radeon 0000:01:00.0: GRBM_STATUS_SE0 = 0x00000007
radeon 0000:01:00.0: GRBM_STATUS_SE1 = 0x00000007
radeon 0000:01:00.0: SRBM_STATUS = 0x200000C0
radeon 0000:01:00.0: SRBM_STATUS2 = 0x00000000
radeon 0000:01:00.0: R_008674_CP_STALLED_STAT1 = 0x00000000
radeon 0000:01:00.0: R_008678_CP_STALLED_STAT2 = 0x00010000
radeon 0000:01:00.0: R_00867C_CP_BUSY_STAT = 0x00000000
radeon 0000:01:00.0: R_008680_CP_STAT = 0x80018647
radeon 0000:01:00.0: R_00D034_DMA_STATUS_REG = 0x44C83D57
radeon 0000:01:00.0: GRBM_SOFT_RESET=0x00004001
radeon 0000:01:00.0: SRBM_SOFT_RESET=0x00000100
radeon 0000:01:00.0: GRBM_STATUS = 0x00003828
radeon 0000:01:00.0: GRBM_STATUS_SE0 = 0x00000007
radeon 0000:01:00.0: GRBM_STATUS_SE1 = 0x00000007
radeon 0000:01:00.0: SRBM_STATUS = 0x200000C0
radeon 0000:01:00.0: SRBM_STATUS2 = 0x00000000
radeon 0000:01:00.0: R_008674_CP_STALLED_STAT1 = 0x00000000
radeon 0000:01:00.0: R_008678_CP_STALLED_STAT2 = 0x00000000
radeon 0000:01:00.0: R_00867C_CP_BUSY_STAT = 0x00000000
radeon 0000:01:00.0: R_008680_CP_STAT = 0x00000000
radeon 0000:01:00.0: R_00D034_DMA_STATUS_REG = 0x44C83D57
radeon 0000:01:00.0: GPU reset succeeded, trying to resume
[drm] enabling PCIE gen 2 link speeds, disable with radeon.pcie_gen2=0
[drm] PCIE GART of 1024M enabled (table at 0x000000000025D000).
radeon 0000:01:00.0: WB enabled
radeon 0000:01:00.0: fence driver on ring 0 use gpu addr 0x0000000040000c00
and cpu addr 0xffff880221ba2c00
radeon 0000:01:00.0: fence driver on ring 3 use gpu addr 0x0000000040000c0c
and cpu addr 0xffff880221ba2c0c
radeon 0000:01:00.0: fence driver on ring 5 use gpu addr 0x000000000005c418
and cpu addr 0xffffc90010f1c418
[drm] ring test on 0 succeeded in 1 usecs
[drm] ring test on 3 succeeded in 1 usecs
[drm] ring test on 5 succeeded in 1 usecs
[drm] UVD initialized successfully.
[drm] Enabling audio 0 support
[drm] ib test on ring 0 succeeded in 0 usecs
[drm] ib test on ring 3 succeeded in 1 usecs
[drm] ib test on ring 5 succeeded
radeon 0000:01:00.0: GPU lockup CP stall for more than 10005msec
radeon 0000:01:00.0: GPU lockup (waiting for 0x0000000000000089 last fence id
0x0000000000000087 on ring 0)
[drm:rv770_stop_dpm] *ERROR* Could not force DPM to low.
[drm] Disabling audio 0 support
radeon 0000:01:00.0: Saved 55 dwords of commands on ring 0.
radeon 0000:01:00.0: GPU softreset: 0x00000008
radeon 0000:01:00.0: GRBM_STATUS = 0xA0003828
radeon 0000:01:00.0: GRBM_STATUS_SE0 = 0x00000007
radeon 0000:01:00.0: GRBM_STATUS_SE1 = 0x00000007
radeon 0000:01:00.0: SRBM_STATUS = 0x200000C0
radeon 0000:01:00.0: SRBM_STATUS2 = 0x00000000
radeon 0000:01:00.0: R_008674_CP_STALLED_STAT1 = 0x00000000
radeon 0000:01:00.0: R_008678_CP_STALLED_STAT2 = 0x00010000
radeon 0000:01:00.0: R_00867C_CP_BUSY_STAT = 0x00000000
radeon 0000:01:00.0: R_008680_CP_STAT = 0x80018647
radeon 0000:01:00.0: R_00D034_DMA_STATUS_REG = 0x44C83D57
radeon 0000:01:00.0: GRBM_SOFT_RESET=0x00004001
radeon 0000:01:00.0: SRBM_SOFT_RESET=0x00000100
radeon 0000:01:00.0: GRBM_STATUS = 0x00003828
radeon 0000:01:00.0: GRBM_STATUS_SE0 = 0x00000007
radeon 0000:01:00.0: GRBM_STATUS_SE1 = 0x00000007
radeon 0000:01:00.0: SRBM_STATUS = 0x200000C0
radeon 0000:01:00.0: SRBM_STATUS2 = 0x00000000
radeon 0000:01:00.0: R_008674_CP_STALLED_STAT1 = 0x00000000
radeon 0000:01:00.0: R_008678_CP_STALLED_STAT2 = 0x00000000
radeon 0000:01:00.0: R_00867C_CP_BUSY_STAT = 0x00000000
radeon 0000:01:00.0: R_008680_CP_STAT = 0x00000000
radeon 0000:01:00.0: R_00D034_DMA_STATUS_REG = 0x44C83D57
radeon 0000:01:00.0: GPU reset succeeded, trying to resume
[drm] enabling PCIE gen 2 link speeds, disable with radeon.pcie_gen2=0
[drm] PCIE GART of 1024M enabled (table at 0x000000000025D000).
radeon 0000:01:00.0: WB enabled
radeon 0000:01:00.0: fence driver on ring 0 use gpu addr 0x0000000040000c00
and cpu addr 0xffff880221ba2c00
radeon 0000:01:00.0: fence driver on ring 3 use gpu addr 0x0000000040000c0c
and cpu addr 0xffff880221ba2c0c
radeon 0000:01:00.0: fence driver on ring 5 use gpu addr 0x000000000005c418
and cpu addr 0xffffc90010f1c418
[drm] ring test on 0 succeeded in 1 usecs
[drm] ring test on 3 succeeded in 1 usecs
[drm] ring test on 5 succeeded in 1 usecs
[drm] UVD initialized successfully.
[drm] Enabling audio 0 support
[drm] ib test on ring 0 succeeded in 0 usecs
[drm] ib test on ring 3 succeeded in 1 usecs
[drm] ib test on ring 5 succeeded
radeon 0000:01:00.0: GPU lockup CP stall for more than 10006msec
radeon 0000:01:00.0: GPU lockup (waiting for 0x0000000000000166 last fence id
0x0000000000000164 on ring 0)
[drm:rv770_stop_dpm] *ERROR* Could not force DPM to low.
[drm] Disabling audio 0 support
radeon 0000:01:00.0: Saved 55 dwords of commands on ring 0.
radeon 0000:01:00.0: GPU softreset: 0x00000008
radeon 0000:01:00.0: GRBM_STATUS = 0xA0003828
radeon 0000:01:00.0: GRBM_STATUS_SE0 = 0x00000007
radeon 0000:01:00.0: GRBM_STATUS_SE1 = 0x00000007
radeon 0000:01:00.0: SRBM_STATUS = 0x20000AC0
radeon 0000:01:00.0: SRBM_STATUS2 = 0x00000000
radeon 0000:01:00.0: R_008674_CP_STALLED_STAT1 = 0x00000000
radeon 0000:01:00.0: R_008678_CP_STALLED_STAT2 = 0x00010000
radeon 0000:01:00.0: R_00867C_CP_BUSY_STAT = 0x00000000
radeon 0000:01:00.0: R_008680_CP_STAT = 0x80018647
radeon 0000:01:00.0: R_00D034_DMA_STATUS_REG = 0x44C83D57
radeon 0000:01:00.0: GRBM_SOFT_RESET=0x00004001
radeon 0000:01:00.0: SRBM_SOFT_RESET=0x00000100
radeon 0000:01:00.0: GRBM_STATUS = 0x00003828
radeon 0000:01:00.0: GRBM_STATUS_SE0 = 0x00000007
radeon 0000:01:00.0: GRBM_STATUS_SE1 = 0x00000007
radeon 0000:01:00.0: SRBM_STATUS = 0x200000C0
radeon 0000:01:00.0: SRBM_STATUS2 = 0x00000000
radeon 0000:01:00.0: R_008674_CP_STALLED_STAT1 = 0x00000000
radeon 0000:01:00.0: R_008678_CP_STALLED_STAT2 = 0x00000000
radeon 0000:01:00.0: R_00867C_CP_BUSY_STAT = 0x00000000
radeon 0000:01:00.0: R_008680_CP_STAT = 0x00000000
radeon 0000:01:00.0: R_00D034_DMA_STATUS_REG = 0x44C83D57
radeon 0000:01:00.0: GPU reset succeeded, trying to resume
[drm] enabling PCIE gen 2 link speeds, disable with radeon.pcie_gen2=0
[drm] PCIE GART of 1024M enabled (table at 0x000000000025D000).
radeon 0000:01:00.0: WB enabled
radeon 0000:01:00.0: fence driver on ring 0 use gpu addr 0x0000000040000c00
and cpu addr 0xffff880221ba2c00
radeon 0000:01:00.0: fence driver on ring 3 use gpu addr 0x0000000040000c0c
and cpu addr 0xffff880221ba2c0c
radeon 0000:01:00.0: fence driver on ring 5 use gpu addr 0x000000000005c418
and cpu addr 0xffffc90010f1c418
[drm] ring test on 0 succeeded in 1 usecs
[drm] ring test on 3 succeeded in 1 usecs
[drm] ring test on 5 succeeded in 1 usecs
[drm] UVD initialized successfully.
[drm] Enabling audio 0 support
[drm] ib test on ring 0 succeeded in 0 usecs
[drm] ib test on ring 3 succeeded in 1 usecs
[drm] ib test on ring 5 succeeded
apologies if those logs should have been done as attachemnts
--
You are receiving this mail because:
You are the assignee for the bug.
[-- Attachment #1.2: Type: text/html, Size: 16118 bytes --]
[-- Attachment #2: Type: text/plain, Size: 159 bytes --]
_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
http://lists.freedesktop.org/mailman/listinfo/dri-devel
^ permalink raw reply [flat|nested] 13+ messages in thread
* [Bug 72648] All 3 monitor EDIDs show the same
2013-12-12 19:27 [Bug 72648] New: All 3 monitor EDIDs show the same bugzilla-daemon
@ 2013-12-12 20:53 ` bugzilla-daemon
2013-12-13 15:35 ` bugzilla-daemon
` (10 subsequent siblings)
11 siblings, 0 replies; 13+ messages in thread
From: bugzilla-daemon @ 2013-12-12 20:53 UTC (permalink / raw)
To: dri-devel
[-- Attachment #1.1: Type: text/plain, Size: 248 bytes --]
https://bugs.freedesktop.org/show_bug.cgi?id=72648
--- Comment #1 from Alex Deucher <agd5f@yahoo.com> ---
Please attach your xorg log, xrandr --verbose, and dmesg output.
--
You are receiving this mail because:
You are the assignee for the bug.
[-- Attachment #1.2: Type: text/html, Size: 985 bytes --]
[-- Attachment #2: Type: text/plain, Size: 159 bytes --]
_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
http://lists.freedesktop.org/mailman/listinfo/dri-devel
^ permalink raw reply [flat|nested] 13+ messages in thread
* [Bug 72648] All 3 monitor EDIDs show the same
2013-12-12 19:27 [Bug 72648] New: All 3 monitor EDIDs show the same bugzilla-daemon
2013-12-12 20:53 ` [Bug 72648] " bugzilla-daemon
@ 2013-12-13 15:35 ` bugzilla-daemon
2013-12-13 15:37 ` bugzilla-daemon
` (9 subsequent siblings)
11 siblings, 0 replies; 13+ messages in thread
From: bugzilla-daemon @ 2013-12-13 15:35 UTC (permalink / raw)
To: dri-devel
[-- Attachment #1.1: Type: text/plain, Size: 280 bytes --]
https://bugs.freedesktop.org/show_bug.cgi?id=72648
--- Comment #2 from jim.cromie@gmail.com ---
Created attachment 90726
--> https://bugs.freedesktop.org/attachment.cgi?id=90726&action=edit
Xorg.0.log
--
You are receiving this mail because:
You are the assignee for the bug.
[-- Attachment #1.2: Type: text/html, Size: 1114 bytes --]
[-- Attachment #2: Type: text/plain, Size: 159 bytes --]
_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
http://lists.freedesktop.org/mailman/listinfo/dri-devel
^ permalink raw reply [flat|nested] 13+ messages in thread
* [Bug 72648] All 3 monitor EDIDs show the same
2013-12-12 19:27 [Bug 72648] New: All 3 monitor EDIDs show the same bugzilla-daemon
2013-12-12 20:53 ` [Bug 72648] " bugzilla-daemon
2013-12-13 15:35 ` bugzilla-daemon
@ 2013-12-13 15:37 ` bugzilla-daemon
2013-12-13 15:38 ` bugzilla-daemon
` (8 subsequent siblings)
11 siblings, 0 replies; 13+ messages in thread
From: bugzilla-daemon @ 2013-12-13 15:37 UTC (permalink / raw)
To: dri-devel
[-- Attachment #1.1: Type: text/plain, Size: 286 bytes --]
https://bugs.freedesktop.org/show_bug.cgi?id=72648
--- Comment #3 from jim.cromie@gmail.com ---
Created attachment 90727
--> https://bugs.freedesktop.org/attachment.cgi?id=90727&action=edit
xrandr --verbose
--
You are receiving this mail because:
You are the assignee for the bug.
[-- Attachment #1.2: Type: text/html, Size: 1132 bytes --]
[-- Attachment #2: Type: text/plain, Size: 159 bytes --]
_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
http://lists.freedesktop.org/mailman/listinfo/dri-devel
^ permalink raw reply [flat|nested] 13+ messages in thread
* [Bug 72648] All 3 monitor EDIDs show the same
2013-12-12 19:27 [Bug 72648] New: All 3 monitor EDIDs show the same bugzilla-daemon
` (2 preceding siblings ...)
2013-12-13 15:37 ` bugzilla-daemon
@ 2013-12-13 15:38 ` bugzilla-daemon
2013-12-13 16:18 ` bugzilla-daemon
` (7 subsequent siblings)
11 siblings, 0 replies; 13+ messages in thread
From: bugzilla-daemon @ 2013-12-13 15:38 UTC (permalink / raw)
To: dri-devel
[-- Attachment #1.1: Type: text/plain, Size: 372 bytes --]
https://bugs.freedesktop.org/show_bug.cgi?id=72648
--- Comment #4 from Alex Deucher <agd5f@yahoo.com> ---
According to your log, all the EDIDs are correct. It looks like the drm sysfs
layer incorrectly reports the same edid for connectors via sysfs, but the
driver has the correct information.
--
You are receiving this mail because:
You are the assignee for the bug.
[-- Attachment #1.2: Type: text/html, Size: 1109 bytes --]
[-- Attachment #2: Type: text/plain, Size: 159 bytes --]
_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
http://lists.freedesktop.org/mailman/listinfo/dri-devel
^ permalink raw reply [flat|nested] 13+ messages in thread
* [Bug 72648] All 3 monitor EDIDs show the same
2013-12-12 19:27 [Bug 72648] New: All 3 monitor EDIDs show the same bugzilla-daemon
` (3 preceding siblings ...)
2013-12-13 15:38 ` bugzilla-daemon
@ 2013-12-13 16:18 ` bugzilla-daemon
2013-12-13 16:24 ` bugzilla-daemon
` (6 subsequent siblings)
11 siblings, 0 replies; 13+ messages in thread
From: bugzilla-daemon @ 2013-12-13 16:18 UTC (permalink / raw)
To: dri-devel
[-- Attachment #1.1: Type: text/plain, Size: 1106 bytes --]
https://bugs.freedesktop.org/show_bug.cgi?id=72648
--- Comment #5 from jim.cromie@gmail.com ---
Created attachment 90730
--> https://bugs.freedesktop.org/attachment.cgi?id=90730&action=edit
dmesg for 3.13.0-rc3-x2a-00302-g8d27637
I have rebooted since opening this bug-report.
The next reboot didnt have the GPU-lockup that was present in
the original report:
radeon 0000:01:00.0: GPU lockup CP stall for more than 10017msec
radeon 0000:01:00.0: GPU lockup (waiting for 0x000000000000006b last fence id
0x0000000000000069 on ring 0)
[drm:rv770_stop_dpm] *ERROR* Could not force DPM to low.
[drm] Disabling audio 0 support
radeon 0000:01:00.0: Saved 55 dwords of commands on ring 0.
radeon 0000:01:00.0: GPU softreset: 0x00000008
radeon 0000:01:00.0: GRBM_STATUS = 0xA0003828
radeon 0000:01:00.0: GRBM_STATUS_SE0 = 0x00000007
radeon 0000:01:00.0: GRBM_STATUS_SE1 = 0x00000007
...
this and the previous attachments are from a later reboot,
to keep things consistent at least.
--
You are receiving this mail because:
You are the assignee for the bug.
[-- Attachment #1.2: Type: text/html, Size: 1998 bytes --]
[-- Attachment #2: Type: text/plain, Size: 159 bytes --]
_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
http://lists.freedesktop.org/mailman/listinfo/dri-devel
^ permalink raw reply [flat|nested] 13+ messages in thread
* [Bug 72648] All 3 monitor EDIDs show the same
2013-12-12 19:27 [Bug 72648] New: All 3 monitor EDIDs show the same bugzilla-daemon
` (4 preceding siblings ...)
2013-12-13 16:18 ` bugzilla-daemon
@ 2013-12-13 16:24 ` bugzilla-daemon
2013-12-13 16:50 ` bugzilla-daemon
` (5 subsequent siblings)
11 siblings, 0 replies; 13+ messages in thread
From: bugzilla-daemon @ 2013-12-13 16:24 UTC (permalink / raw)
To: dri-devel
[-- Attachment #1.1: Type: text/plain, Size: 555 bytes --]
https://bugs.freedesktop.org/show_bug.cgi?id=72648
--- Comment #6 from jim.cromie@gmail.com ---
Created attachment 90733
--> https://bugs.freedesktop.org/attachment.cgi?id=90733&action=edit
dmesg with GPU lockup (only happened once)
This is the dmesg from the original report.
Its from a slightly older kernel:
3.13.0-rc3-x2a-00174-g9538e10-1stboot/dmesg
the GPU lockup didnt happen on 2ndboot (of same kernel),
I have that too and will attach it if you want to see it too.
--
You are receiving this mail because:
You are the assignee for the bug.
[-- Attachment #1.2: Type: text/html, Size: 1453 bytes --]
[-- Attachment #2: Type: text/plain, Size: 159 bytes --]
_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
http://lists.freedesktop.org/mailman/listinfo/dri-devel
^ permalink raw reply [flat|nested] 13+ messages in thread
* [Bug 72648] All 3 monitor EDIDs show the same
2013-12-12 19:27 [Bug 72648] New: All 3 monitor EDIDs show the same bugzilla-daemon
` (5 preceding siblings ...)
2013-12-13 16:24 ` bugzilla-daemon
@ 2013-12-13 16:50 ` bugzilla-daemon
2013-12-13 18:12 ` bugzilla-daemon
` (4 subsequent siblings)
11 siblings, 0 replies; 13+ messages in thread
From: bugzilla-daemon @ 2013-12-13 16:50 UTC (permalink / raw)
To: dri-devel
[-- Attachment #1.1: Type: text/plain, Size: 365 bytes --]
https://bugs.freedesktop.org/show_bug.cgi?id=72648
--- Comment #7 from Alex Deucher <agd5f@yahoo.com> ---
A GPU lockup is a separate issue and is usually caused by bugs in the userspace
drivers (mesa or ddx). I'd suggest upgrading your userspace stack if you are
using an older version.
--
You are receiving this mail because:
You are the assignee for the bug.
[-- Attachment #1.2: Type: text/html, Size: 1102 bytes --]
[-- Attachment #2: Type: text/plain, Size: 159 bytes --]
_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
http://lists.freedesktop.org/mailman/listinfo/dri-devel
^ permalink raw reply [flat|nested] 13+ messages in thread
* [Bug 72648] All 3 monitor EDIDs show the same
2013-12-12 19:27 [Bug 72648] New: All 3 monitor EDIDs show the same bugzilla-daemon
` (6 preceding siblings ...)
2013-12-13 16:50 ` bugzilla-daemon
@ 2013-12-13 18:12 ` bugzilla-daemon
2013-12-13 18:19 ` bugzilla-daemon
` (3 subsequent siblings)
11 siblings, 0 replies; 13+ messages in thread
From: bugzilla-daemon @ 2013-12-13 18:12 UTC (permalink / raw)
To: dri-devel
[-- Attachment #1.1: Type: text/plain, Size: 3263 bytes --]
https://bugs.freedesktop.org/show_bug.cgi?id=72648
--- Comment #8 from jim.cromie@gmail.com ---
(In reply to comment #4)
> According to your log, all the EDIDs are correct. It looks like the drm
> sysfs layer incorrectly reports the same edid for connectors via sysfs, but
> the driver has the correct information.
yes, 3 different monitors are identified:
[jimc@groucho bootlogs]$ grep Manufacturer /var/log/Xorg.0.log
[ 30.170] (II) RADEON(0): Manufacturer: DEL Model: a039 Serial#: 876102485
[ 30.171] (II) RADEON(0): Manufacturer's mask: 0
[ 30.205] (II) RADEON(0): Manufacturer: ACR Model: ad99 Serial#:
1914720286
[ 30.206] (II) RADEON(0): Manufacturer's mask: 0
[ 30.269] (II) RADEON(0): Manufacturer: LNX Model: 0 Serial#: 0
[ 30.269] (II) RADEON(0): Manufacturer's mask: 0
fwiw, the last one is an AOC E2252S monitor,
I guess "LNX" is a placeholder/default due to the Raw EDID errors,
happening since I plugged in the AOC.
[ 2.362551] [drm:drm_edid_block_valid] *ERROR* EDID checksum is invalid,
remainder is 153
[ 2.362594] Raw EDID:
[ 2.362601] 00 ff ff ff ff ff ff 00 05 e3 52 22 db 06 00 00
[ 2.362623] 1b 17 01 03 68 30 1b 78 2a ee d1 a5 55 48 37 ff
[ 2.362644] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[ 2.362666] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[ 2.362687] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[ 2.362709] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[ 2.362731] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[ 2.362752] ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
Those remainder errors appear to be random, varying between the 2 boots
of the rc3-00174 kernel that I recorded (and the others too)
[jimc@groucho bootlogs]$ grep remainder 3.13.0-rc3-x2a-00174-g9538e10-*/dmesg |
sort -t: -k2
3.13.0-rc3-x2a-00174-g9538e10-2ndboot/dmesg: [drm:drm_edid_block_valid] *ERROR*
EDID checksum is invalid, remainder is 119
3.13.0-rc3-x2a-00174-g9538e10-2ndboot/dmesg: [drm:drm_edid_block_valid] *ERROR*
EDID checksum is invalid, remainder is 128
3.13.0-rc3-x2a-00174-g9538e10-2ndboot/dmesg: [drm:drm_edid_block_valid] *ERROR*
EDID checksum is invalid, remainder is 130
3.13.0-rc3-x2a-00174-g9538e10-1stboot/dmesg: [drm:drm_edid_block_valid] *ERROR*
EDID checksum is invalid, remainder is 200
3.13.0-rc3-x2a-00174-g9538e10-1stboot/dmesg: [drm:drm_edid_block_valid] *ERROR*
EDID checksum is invalid, remainder is 241
3.13.0-rc3-x2a-00174-g9538e10-2ndboot/dmesg: [drm:drm_edid_block_valid] *ERROR*
EDID checksum is invalid, remainder is 243
3.13.0-rc3-x2a-00174-g9538e10-1stboot/dmesg: [drm:drm_edid_block_valid] *ERROR*
EDID checksum is invalid, remainder is 244
3.13.0-rc3-x2a-00174-g9538e10-1stboot/dmesg: [drm:drm_edid_block_valid] *ERROR*
EDID checksum is invalid, remainder is 251
3.13.0-rc3-x2a-00174-g9538e10-1stboot/dmesg: [drm:drm_edid_block_valid] *ERROR*
EDID checksum is invalid, remainder is 87
So I agree that sysfs is somehow to blame for the original worry.
I guess I'll post over on LKML, and refer back to this bug-rpt.
After testing if the EDID cmdline addition might be involved.
--
You are receiving this mail because:
You are the assignee for the bug.
[-- Attachment #1.2: Type: text/html, Size: 4080 bytes --]
[-- Attachment #2: Type: text/plain, Size: 159 bytes --]
_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
http://lists.freedesktop.org/mailman/listinfo/dri-devel
^ permalink raw reply [flat|nested] 13+ messages in thread
* [Bug 72648] All 3 monitor EDIDs show the same
2013-12-12 19:27 [Bug 72648] New: All 3 monitor EDIDs show the same bugzilla-daemon
` (7 preceding siblings ...)
2013-12-13 18:12 ` bugzilla-daemon
@ 2013-12-13 18:19 ` bugzilla-daemon
2013-12-13 18:22 ` bugzilla-daemon
` (2 subsequent siblings)
11 siblings, 0 replies; 13+ messages in thread
From: bugzilla-daemon @ 2013-12-13 18:19 UTC (permalink / raw)
To: dri-devel
[-- Attachment #1.1: Type: text/plain, Size: 633 bytes --]
https://bugs.freedesktop.org/show_bug.cgi?id=72648
--- Comment #9 from Alex Deucher <agd5f@yahoo.com> ---
(In reply to comment #8)
> fwiw, the last one is an AOC E2252S monitor,
> I guess "LNX" is a placeholder/default due to the Raw EDID errors,
> happening since I plugged in the AOC.
Yes, it comes from edid/1920x1080.bin
>
> So I agree that sysfs is somehow to blame for the original worry.
> I guess I'll post over on LKML, and refer back to this bug-rpt.
> After testing if the EDID cmdline addition might be involved.
You might try dri-devel.
--
You are receiving this mail because:
You are the assignee for the bug.
[-- Attachment #1.2: Type: text/html, Size: 1496 bytes --]
[-- Attachment #2: Type: text/plain, Size: 159 bytes --]
_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
http://lists.freedesktop.org/mailman/listinfo/dri-devel
^ permalink raw reply [flat|nested] 13+ messages in thread
* [Bug 72648] All 3 monitor EDIDs show the same
2013-12-12 19:27 [Bug 72648] New: All 3 monitor EDIDs show the same bugzilla-daemon
` (8 preceding siblings ...)
2013-12-13 18:19 ` bugzilla-daemon
@ 2013-12-13 18:22 ` bugzilla-daemon
2013-12-13 23:29 ` bugzilla-daemon
2013-12-16 23:57 ` bugzilla-daemon
11 siblings, 0 replies; 13+ messages in thread
From: bugzilla-daemon @ 2013-12-13 18:22 UTC (permalink / raw)
To: dri-devel
[-- Attachment #1.1: Type: text/plain, Size: 1308 bytes --]
https://bugs.freedesktop.org/show_bug.cgi?id=72648
--- Comment #10 from jim.cromie@gmail.com ---
(In reply to comment #7)
> A GPU lockup is a separate issue and is usually caused by bugs in the
> userspace drivers (mesa or ddx). I'd suggest upgrading your userspace stack
> if you are using an older version.
hmm. Im on Fedora-19, updated a few days ago:
Dec 09 08:51:39 Updated: mesa-libglapi-9.2.4-1.20131128.fc19.x86_64
Dec 09 08:51:40 Updated: mesa-libGL-9.2.4-1.20131128.fc19.x86_64
Dec 09 08:52:17 Updated: mesa-libgbm-9.2.4-1.20131128.fc19.x86_64
Dec 09 08:52:18 Updated: mesa-libEGL-9.2.4-1.20131128.fc19.x86_64
Dec 09 08:52:52 Updated: mesa-filesystem-9.2.4-1.20131128.fc19.x86_64
Dec 09 08:53:32 Updated: mesa-dri-drivers-9.2.4-1.20131128.fc19.x86_64
Dec 09 08:54:13 Updated: mesa-libEGL-devel-9.2.4-1.20131128.fc19.x86_64
Dec 09 08:54:39 Updated: mesa-libGL-devel-9.2.4-1.20131128.fc19.x86_64
Dec 09 08:56:45 Updated: mesa-libwayland-egl-9.2.4-1.20131128.fc19.x86_64
Dec 09 08:56:47 Updated: mesa-libxatracker-9.2.4-1.20131128.fc19.x86_64
I only saw the error once, and I didnt notice any misbehavior
(that said, recent behavior wrt low-res may have masked it).
Is there anything I should watch for and report ?
--
You are receiving this mail because:
You are the assignee for the bug.
[-- Attachment #1.2: Type: text/html, Size: 2108 bytes --]
[-- Attachment #2: Type: text/plain, Size: 159 bytes --]
_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
http://lists.freedesktop.org/mailman/listinfo/dri-devel
^ permalink raw reply [flat|nested] 13+ messages in thread
* [Bug 72648] All 3 monitor EDIDs show the same
2013-12-12 19:27 [Bug 72648] New: All 3 monitor EDIDs show the same bugzilla-daemon
` (9 preceding siblings ...)
2013-12-13 18:22 ` bugzilla-daemon
@ 2013-12-13 23:29 ` bugzilla-daemon
2013-12-16 23:57 ` bugzilla-daemon
11 siblings, 0 replies; 13+ messages in thread
From: bugzilla-daemon @ 2013-12-13 23:29 UTC (permalink / raw)
To: dri-devel
[-- Attachment #1.1: Type: text/plain, Size: 674 bytes --]
https://bugs.freedesktop.org/show_bug.cgi?id=72648
--- Comment #11 from jim.cromie@gmail.com ---
update:
prepping the crow now..
original bug report was based upon this showing same monitor 3 times:
$ for p in /sys/class/drm/card0*/edid; do
echo; echo $p; echo;
monitor-edid $p ;
done
but those sysfs files are really different
$ pwd
/sys/devices/pci0000:00/0000:00:02.0/0000:01:00.0/drm/card0
$ sum card0-*/edid
14477 1 card0-DVI-D-1/edid
51583 1 card0-HDMI-A-1/edid
64619 1 card0-VGA-1/edid
and my script works as expected with monitor-parse-edid
sorry for the noise
--
You are receiving this mail because:
You are the assignee for the bug.
[-- Attachment #1.2: Type: text/html, Size: 1398 bytes --]
[-- Attachment #2: Type: text/plain, Size: 159 bytes --]
_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
http://lists.freedesktop.org/mailman/listinfo/dri-devel
^ permalink raw reply [flat|nested] 13+ messages in thread
* [Bug 72648] All 3 monitor EDIDs show the same
2013-12-12 19:27 [Bug 72648] New: All 3 monitor EDIDs show the same bugzilla-daemon
` (10 preceding siblings ...)
2013-12-13 23:29 ` bugzilla-daemon
@ 2013-12-16 23:57 ` bugzilla-daemon
11 siblings, 0 replies; 13+ messages in thread
From: bugzilla-daemon @ 2013-12-16 23:57 UTC (permalink / raw)
To: dri-devel
[-- Attachment #1.1: Type: text/plain, Size: 416 bytes --]
https://bugs.freedesktop.org/show_bug.cgi?id=72648
Alex Deucher <agd5f@yahoo.com> changed:
What |Removed |Added
----------------------------------------------------------------------------
Status|NEW |RESOLVED
Resolution|--- |NOTABUG
--
You are receiving this mail because:
You are the assignee for the bug.
[-- Attachment #1.2: Type: text/html, Size: 1199 bytes --]
[-- Attachment #2: Type: text/plain, Size: 159 bytes --]
_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
http://lists.freedesktop.org/mailman/listinfo/dri-devel
^ permalink raw reply [flat|nested] 13+ messages in thread
end of thread, other threads:[~2013-12-16 23:57 UTC | newest]
Thread overview: 13+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2013-12-12 19:27 [Bug 72648] New: All 3 monitor EDIDs show the same bugzilla-daemon
2013-12-12 20:53 ` [Bug 72648] " bugzilla-daemon
2013-12-13 15:35 ` bugzilla-daemon
2013-12-13 15:37 ` bugzilla-daemon
2013-12-13 15:38 ` bugzilla-daemon
2013-12-13 16:18 ` bugzilla-daemon
2013-12-13 16:24 ` bugzilla-daemon
2013-12-13 16:50 ` bugzilla-daemon
2013-12-13 18:12 ` bugzilla-daemon
2013-12-13 18:19 ` bugzilla-daemon
2013-12-13 18:22 ` bugzilla-daemon
2013-12-13 23:29 ` bugzilla-daemon
2013-12-16 23:57 ` bugzilla-daemon
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).