dri-devel Archive on lore.kernel.org
 help / color / mirror / Atom feed
From: bugzilla-daemon@bugzilla.kernel.org
To: dri-devel@lists.freedesktop.org
Subject: [Bug 83461] hdmi screen flicker/unusable
Date: Thu, 19 Feb 2015 20:36:02 +0000	[thread overview]
Message-ID: <bug-83461-2300-TS96mxzEFx@https.bugzilla.kernel.org/> (raw)
In-Reply-To: <bug-83461-2300@https.bugzilla.kernel.org/>

https://bugzilla.kernel.org/show_bug.cgi?id=83461

Joerg Esser <jackfritt@boh.de> changed:

           What    |Removed                     |Added
----------------------------------------------------------------------------
                 CC|                            |jackfritt@boh.de

--- Comment #35 from Joerg Esser <jackfritt@boh.de> ---
I had similar problems until I used 3.18.7.
I couldn´t even boot beyond radeon load. The whole kernel crashed and my
Monitor showed no usable signal. I had to blacklist and load it manually with
option radeon.dpm=0, after turning on my Monitor . With kernel 3.18.6 I could
use the radeon option radeon.aspm=0, but still had to turn on my Monitor before
radeon module load.

Now with this kernel I only need radeon.aspm=0 and no blacklist option, either
the Monitor is turned on before or after radeon module load. Also GPU speedup
with Video output works fine.

Thx alot!!

Here´s my card info

lspci -s 01:00.0 -vv
01:00.0 VGA compatible controller: Advanced Micro Devices, Inc. [AMD/ATI] Cedar
[Radeon HD 5000/6000/7350/8350 Series] (prog-if 00 [VGA controller])
        Subsystem: PC Partner Limited / Sapphire Technology Device e157
        Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx+
        Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
        Latency: 0, Cache Line Size: 32 bytes
        Interrupt: pin A routed to IRQ 33
        Region 0: Memory at e0000000 (64-bit, prefetchable) [size=256M]
        Region 2: Memory at f7cc0000 (64-bit, non-prefetchable) [size=128K]
        Region 4: I/O ports at d000 [size=256]
        Expansion ROM at f7ca0000 [disabled] [size=128K]
        Capabilities: [50] Power Management version 3
                Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA
PME(D0-,D1-,D2-,D3hot-,D3cold-)
                Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
        Capabilities: [58] Express (v2) Legacy Endpoint, MSI 00
                DevCap: MaxPayload 256 bytes, PhantFunc 0, Latency L0s <4us, L1
unlimited
                        ExtTag+ AttnBtn- AttnInd- PwrInd- RBE+ FLReset-
                DevCtl: Report errors: Correctable- Non-Fatal- Fatal-
Unsupported-
                        RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop+
                        MaxPayload 128 bytes, MaxReadReq 512 bytes
                DevSta: CorrErr+ UncorrErr- FatalErr- UnsuppReq+ AuxPwr-
TransPend-
                LnkCap: Port #0, Speed 5GT/s, Width x16, ASPM L0s L1, Exit
Latency L0s <64ns, L1 <1us
                        ClockPM- Surprise- LLActRep- BwNot-
                LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- CommClk+
                        ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
                LnkSta: Speed 5GT/s, Width x2, TrErr- Train- SlotClk+ DLActive-
BWMgmt- ABWMgmt-
                DevCap2: Completion Timeout: Range ABCD, TimeoutDis+, LTR-,
OBFF Not Supported
                DevCtl2: Completion Timeout: 50us to 50ms, TimeoutDis-, LTR-,
OBFF Disabled
                LnkCtl2: Target Link Speed: 5GT/s, EnterCompliance- SpeedDis-
                         Transmit Margin: Normal Operating Range,
EnterModifiedCompliance- ComplianceSOS-
                         Compliance De-emphasis: -6dB
                LnkSta2: Current De-emphasis Level: -6dB,
EqualizationComplete-, EqualizationPhase1-
                         EqualizationPhase2-, EqualizationPhase3-,
LinkEqualizationRequest-
        Capabilities: [a0] MSI: Enable+ Count=1/1 Maskable- 64bit+
                Address: 00000000fee00000  Data: 40e2
        Capabilities: [100 v1] Vendor Specific Information: ID=0001 Rev=1
Len=010 <?>
        Capabilities: [150 v1] Advanced Error Reporting
                UESta:  DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt-
RxOF- MalfTLP- ECRC- UnsupReq- ACSViol-
                UEMsk:  DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt-
RxOF- MalfTLP- ECRC- UnsupReq- ACSViol-
                UESvrt: DLP+ SDES+ TLP- FCP+ CmpltTO- CmpltAbrt- UnxCmplt-
RxOF+ MalfTLP+ ECRC- UnsupReq- ACSViol-
                CESta:  RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr+
                CEMsk:  RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr+
                AERCap: First Error Pointer: 00, GenCap+ CGenEn- ChkCap+ ChkEn-
        Kernel driver in use: radeon

-- 
You are receiving this mail because:
You are watching the assignee of the bug.
_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
http://lists.freedesktop.org/mailman/listinfo/dri-devel

  parent reply	other threads:[~2015-02-19 20:36 UTC|newest]

Thread overview: 39+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2014-08-29 18:49 [Bug 83461] New: hdmi screen flicker/unusable bugzilla-daemon
2014-09-08  4:22 ` [Bug 83461] " bugzilla-daemon
2014-09-15 17:03 ` bugzilla-daemon
2014-09-15 18:57 ` bugzilla-daemon
2014-09-16 16:00 ` bugzilla-daemon
2014-09-17  1:10 ` bugzilla-daemon
2014-09-17 14:35 ` bugzilla-daemon
2014-10-19 19:35 ` bugzilla-daemon
2014-10-19 19:37 ` bugzilla-daemon
2014-10-20 16:20 ` bugzilla-daemon
2014-10-23 17:55 ` bugzilla-daemon
2014-10-23 18:05 ` bugzilla-daemon
2014-10-23 18:06 ` bugzilla-daemon
2014-10-24 18:00 ` bugzilla-daemon
2014-10-28 15:49 ` bugzilla-daemon
2014-11-01 19:40 ` bugzilla-daemon
2014-11-01 19:45 ` bugzilla-daemon
2014-11-01 20:01 ` bugzilla-daemon
2014-11-01 20:01 ` bugzilla-daemon
2014-11-02 11:58 ` bugzilla-daemon
2014-11-07 19:19 ` bugzilla-daemon
2014-11-17 11:44 ` bugzilla-daemon
2014-11-18 15:50 ` bugzilla-daemon
2014-11-18 15:50 ` bugzilla-daemon
2014-11-28 21:20 ` bugzilla-daemon
2014-11-29 16:30 ` bugzilla-daemon
2014-11-30 20:51 ` bugzilla-daemon
2014-12-01 11:47 ` bugzilla-daemon
2014-12-28  8:24 ` bugzilla-daemon
2014-12-28 22:11 ` bugzilla-daemon
2014-12-30 16:24 ` bugzilla-daemon
2015-01-17  8:54 ` bugzilla-daemon
2015-01-20 11:23 ` bugzilla-daemon
2015-02-09 16:09 ` bugzilla-daemon
2015-02-09 16:29 ` bugzilla-daemon
2015-02-19 20:36 ` bugzilla-daemon [this message]
2015-02-19 20:39 ` bugzilla-daemon
2015-02-19 20:49 ` bugzilla-daemon
2016-05-02 22:31 ` bugzilla-daemon

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=bug-83461-2300-TS96mxzEFx@https.bugzilla.kernel.org/ \
    --to=bugzilla-daemon@bugzilla.kernel.org \
    --cc=dri-devel@lists.freedesktop.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox