[Bug 89198] Setting Refresh Rate on monitor causes flickering/artifacting

[bugzilla-daemon@freedesktop.org]

[-- Attachment #1.1: Type: text/plain, Size: 1358 bytes --]

https://bugs.freedesktop.org/show_bug.cgi?id=89198

--- Comment #11 from andre35822@yahoo.com ---
(In reply to Alex Deucher from comment #10)
> (In reply to andre35822 from comment #9)
> > (In reply to Alex Deucher from comment #8)
> > > 
> > > *** This bug has been marked as a duplicate of bug 87796 ***
> > 
> > My only concern is if setting DPM to high is safe? Does it increase power
> > usage/requirement, will it make my card reach high temps or anything
> > damaging? Also is this sort of the only "fix", will anything be added in the
> > future so it works with DPM on auto?
> 
> There is a fix on bug 87796, but it would be helpful to get the debugging
> output I mentioned in that bug as well so the patch can be fine tuned.
I am up to help you for whatever it is that you need, I am just a bit confused.
You are referring to this bug report yes?
https://bugs.freedesktop.org/show_bug.cgi?id=87796 and want me to apply the
patch that you put as attachment in Comment 15? Or is it Comment 19 or 20? I am
also not sure how to apply the patch, it looks like something to do with git?
Once I know how to apply the patch, to my understanding you then want me to
enable the "problematic mode", which would be setting the screen to 144hz and
then attachming a dmesg output yes?

-- 
You are receiving this mail because:
You are the assignee for the bug.

[-- Attachment #1.2: Type: text/html, Size: 2904 bytes --]

[-- Attachment #2: Type: text/plain, Size: 159 bytes --]

_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
http://lists.freedesktop.org/mailman/listinfo/dri-devel