[Bug 92302] Unigine Tropics freeze-crashes R390X

[bugzilla-daemon@freedesktop.org]

[-- Attachment #1.1: Type: text/plain, Size: 1535 bytes --]

https://bugs.freedesktop.org/show_bug.cgi?id=92302

--- Comment #8 from Andy Furniss <adf.lists@gmail.com> ---
(In reply to MC Return from comment #6)
> (In reply to Andy Furniss from comment #5)
> > 
> > Maybe nothing to do with the issue here, but there are some unigine
> > workarounds in drirc that may not get read if (historically at least) you
> > don't specify that they should go in /etc. I haven't looked recently but in
> > the past with your options they would end up in /usr/etc and not get used so
> > add -
> > 
> > --sysconfdir=/etc
> 
> Hey Andi,
> thanks a lot for your help also.
> 
> I have rebuilt and reinstalled Mesa/11.0 now, but the result is the same.
> I start tropics (even just in 1024x768 windowed), the benchmark loads and
> the 3d flight to the islands starts with some flickering and visual
> annoyances until the camera turns and the computer hardlocks so bad I cannot
> even open one of the other consoles and I have to do a hard reset and
> reboot. :(

Oh, Ok, Not that I have the same card anyway, but I can't test Tropics as I am
on a pure 64bit setup.

WRT the hard lock did you try SysRq? Apologies if you already know all this -

Press and hold both <Alt> and <SysRq> keys, while still holding them press and
release <s> wait a sec, then press and release <u> then <b>. If it works then
this is a cleaner way than a hard reset as the <s> syncs disks and the <u>
remounts them read only then hopefully the <b> reboots.

-- 
You are receiving this mail because:
You are the assignee for the bug.

[-- Attachment #1.2: Type: text/html, Size: 2509 bytes --]

[-- Attachment #2: Type: text/plain, Size: 159 bytes --]

_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
http://lists.freedesktop.org/mailman/listinfo/dri-devel