[Bug 92936] Tonga powerplay isssues

[bugzilla-daemon@freedesktop.org]

[-- Attachment #1.1: Type: text/plain, Size: 1306 bytes --]

https://bugs.freedesktop.org/show_bug.cgi?id=92936

--- Comment #22 from Andy Furniss <adf.lists@gmail.com> ---
(In reply to Andy Furniss from comment #14)
> Been testing vce and there is an issue with auto.
> 
> This is not just this kernel, I've been back and now I have a script to test
> lots of runs, I can reproduce on older kernels + current fixes as well.
> 
> The issue is that it will hang, at this time I am apparently OK in that I
> can use desktop normally. There is no hung task timeout. If I kill the
> gstreamer process it won't return, then I may get a hung task trace.
> 
> Whether I kill gstreamer or not, quitting X or a VT switch will lock up
> display.
> 
> This only happens when
> /sys/class/drm/card0/device/power_dpm_force_performance_level is auto.
> 
> If it's high or low I can repeatedly run vce encodes OK - I have tested >
> 1000.
> 
> On this kernel and fixes it only takes < 5 runs to lock with the same test.
> 
> On an older kernel it lasted for 25 runs (which is I guess why I didn't hit
> it in "normal" testing + I often forced high for bench marking anyway)

With the latest tonga vce firmware + current agd5f drm-next kernels I can't
reproduce this anymore.

-- 
You are receiving this mail because:
You are the assignee for the bug.

[-- Attachment #1.2: Type: text/html, Size: 2186 bytes --]

[-- Attachment #2: Type: text/plain, Size: 160 bytes --]

_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel