Comment=
# 7
on bug 97500<=
/a>
from Andreas Grosse
Created attachment 12699=
7 [details]
dmesg: boot then unbind
I am getting a kernel panic with Linux 4.8.0 when I unbind my RX480 (XFX Ra=
deon
RX 480 GTR Black 8GB, if that helps) from amdgpu. The system freezes
immediately and only pushes this to the serial console (which is why it is =
not
in the attached dmesg):
[ 80.266963] {1}[Hardware Error]: event severity: fatal
[ 80.266964] {1}[Hardware Error]: Error 0, type: fatal
[ 80.266964] {1}[Hardware Error]: section_type: PCIe error
[ 80.266964] {1}[Hardware Error]: port_type: 4, root port
[ 80.266965] {1}[Hardware Error]: version: 1.16
[ 80.266965] {1}[Hardware Error]: command: 0x4010, status: 0x0547
[ 80.266965] {1}[Hardware Error]: device_id: 0000:00:01.0
[ 80.266966] {1}[Hardware Error]: slot: 0
[ 80.266966] {1}[Hardware Error]: secondary_bus: 0x01
[ 80.266966] {1}[Hardware Error]: vendor_id: 0x8086, device_id: 0x0c01
[ 80.266967] {1}[Hardware Error]: class_code: 000406
[ 80.266967] {1}[Hardware Error]: bridge: secondary_status: 0x2000,
control: 0x0003
[ 80.266967] Kernel panic - not syncing: Fatal hardware error!
[ 80.705884] Kernel Offset: disabled
Is this the same issue?
I have attached the kernel output from boot until I got the panic after
unbinding with this command:
echo 0000:01:00.0 > /sys/bus/pci/drivers/amdgpu/unbind
Is there any further information that I can provide to address this issue?<=
/pre>