From: bugzilla-daemon@freedesktop.org
To: dri-devel@lists.freedesktop.org
Subject: [Bug 97556] amdgpu fan behavior doesn't match windows
Date: Thu, 24 Aug 2017 08:25:51 +0000 [thread overview]
Message-ID: <bug-97556-502-2RiYCdQhbG@http.bugs.freedesktop.org/> (raw)
In-Reply-To: <bug-97556-502@http.bugs.freedesktop.org/>
[-- Attachment #1.1: Type: text/plain, Size: 2366 bytes --]
https://bugs.freedesktop.org/show_bug.cgi?id=97556
--- Comment #6 from Dimitrios Liappis <dimitrios.liappis@gmail.com> ---
I have the same issue on an Asus Radeon RX-550[1] and amdgpu.
The fan is on all the time.
By default pwm1_enable shows 1, however, even when I write 2 to it nothing
changes.
Interestingly enough, `fan1_input` reports no such device, whereas, temp1_input
seems to show the right temp. This seems to be corroborated by the sensors
output where temp is correctly reported but not fan speed.
[root@MS-7885 hwmon0]# pwd
/sys/devices/pci0000:00/0000:00:03.0/0000:03:00.0/hwmon/hwmon0
[root@MS-7885 hwmon0]# cat temp1_input && echo && sensors
32000
amdgpu-pci-0300
Adapter: PCI adapter
fan1: N/A
temp1: +32.0°C (crit = +0.0°C, hyst = +0.0°C)
...
[1]:
03:00.0 VGA compatible controller: Advanced Micro Devices, Inc. [AMD/ATI] Lexa
PRO [Radeon RX 550] (rev c7) (prog-if 00 [VGA controller])
Subsystem: ASUSTeK Computer Inc. Device 0513
Physical Slot: 4
Flags: bus master, fast devsel, latency 0, IRQ 37, NUMA node 0
Memory at e0000000 (64-bit, prefetchable) [size=256M]
Memory at f0000000 (64-bit, prefetchable) [size=2M]
I/O ports at e000 [size=256]
Memory at fbe00000 (32-bit, non-prefetchable) [size=256K]
Expansion ROM at 000c0000 [disabled] [size=128K]
Capabilities: [48] Vendor Specific Information: Len=08 <?>
Capabilities: [50] Power Management version 3
Capabilities: [58] Express Legacy Endpoint, MSI 00
Capabilities: [a0] MSI: Enable+ Count=1/1 Maskable- 64bit+
Capabilities: [100] Vendor Specific Information: ID=0001 Rev=1 Len=010
<?>
Capabilities: [150] Advanced Error Reporting
Capabilities: [200] #15
Capabilities: [270] #19
Capabilities: [2b0] Address Translation Service (ATS)
Capabilities: [2c0] Page Request Interface (PRI)
Capabilities: [2d0] Process Address Space ID (PASID)
Capabilities: [320] Latency Tolerance Reporting
Capabilities: [328] Alternative Routing-ID Interpretation (ARI)
Capabilities: [370] L1 PM Substates
Kernel driver in use: amdgpu
Kernel modules: amdgpu
--
You are receiving this mail because:
You are the assignee for the bug.
[-- Attachment #1.2: Type: text/html, Size: 3180 bytes --]
[-- Attachment #2: Type: text/plain, Size: 160 bytes --]
_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel
next prev parent reply other threads:[~2017-08-24 8:25 UTC|newest]
Thread overview: 9+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-09-01 0:46 [Bug 97556] amdgpu fan behavior doesn't match windows bugzilla-daemon
2016-09-02 15:00 ` bugzilla-daemon
2016-10-16 9:56 ` bugzilla-daemon
2016-11-01 17:05 ` bugzilla-daemon
2017-02-01 15:23 ` bugzilla-daemon
2017-02-01 15:29 ` bugzilla-daemon
2017-08-24 8:25 ` bugzilla-daemon [this message]
2017-10-22 10:02 ` bugzilla-daemon
2019-11-19 8:09 ` bugzilla-daemon
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=bug-97556-502-2RiYCdQhbG@http.bugs.freedesktop.org/ \
--to=bugzilla-daemon@freedesktop.org \
--cc=dri-devel@lists.freedesktop.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox