(In reply to Boyuan Zhang from comment #19) > (In reply to Boyuan Zhang from comment #18) > > (In reply to Andy Furniss from comment #14) > > > but I am afraid the patches regress cbr so the out of order = frames near I frames issue is back. > >=20 > > The "out of order" issue was caused by sending last p a= nd next i frame > > together for dual instance encoding, which has already been solve= d and > > shouldn't affect by this patch. I suspect the i-frame has less QP= (quality) > > than p-frame in cbr case (to meet constant bit-rate) where bit-ra= te is not > > high enough, as a result you might see low picture quality for ea= ch i-frame. > > Please confirm with high bitrate or using analyser to check the o= rder. > >=20 > > If you still see the out-of-order issue, please share the clip an= d command. > >=20 > > Thanks >=20 > Nevermind, the cbr issue was reproduced and fixed. Please try the late= st > patch I just send. Links can be found below: https://lists.freedesktop.org/archives/mesa-dev/2016-November/13= 6065.html https://lists.freedesktop.org/archives/mesa-dev/2016-November/13= 6066.html