From: Abhinav Kumar <abhinavk-sgV2jX0FEOL9JmXXK+q4OQ@public.gmane.org>
To: Jeykumar Sankaran <jsanka-sgV2jX0FEOL9JmXXK+q4OQ@public.gmane.org>
Cc: linux-arm-msm-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
dri-devel-PD4FTy7X32lNgt0PjOBp9y5qC8QIuHrW@public.gmane.org,
seanpaul-F7+t8E8rja9g9hUCZPvPmw@public.gmane.org,
hoegsberg-hpIqsD4AKlfQT0dZR+AlfA@public.gmane.org,
freedreno-PD4FTy7X32lNgt0PjOBp9y5qC8QIuHrW@public.gmane.org,
dan.carpenter-QHcLZuEGTsvQT0dZR+AlfA@public.gmane.org
Subject: Re: [PATCH] drm/msm: validate display and event threads
Date: Fri, 05 Oct 2018 13:50:44 -0700 [thread overview]
Message-ID: <cb0ef7d83957f70f323c871603dc1345@codeaurora.org> (raw)
In-Reply-To: <1538768955-10000-1-git-send-email-jsanka-sgV2jX0FEOL9JmXXK+q4OQ@public.gmane.org>
On 2018-10-05 12:49, Jeykumar Sankaran wrote:
> While creating display and event threads per crtc, validate
> them before setting their priorities.
>
> Change-Id: I1dda805286df981c0f0e2b26507d089d3a21ff6c
> Signed-off-by: Jeykumar Sankaran <jsanka@codeaurora.org>
> ---
> drivers/gpu/drm/msm/msm_drv.c | 49
> ++++++++++++++-----------------------------
> 1 file changed, 16 insertions(+), 33 deletions(-)
>
> diff --git a/drivers/gpu/drm/msm/msm_drv.c
> b/drivers/gpu/drm/msm/msm_drv.c
> index c1abad8..e03c659 100644
> --- a/drivers/gpu/drm/msm/msm_drv.c
> +++ b/drivers/gpu/drm/msm/msm_drv.c
> @@ -553,17 +553,18 @@ static int msm_drm_init(struct device *dev,
> struct drm_driver *drv)
> kthread_run(kthread_worker_fn,
> &priv->disp_thread[i].worker,
> "crtc_commit:%d", priv->disp_thread[i].crtc_id);
> - ret = sched_setscheduler(priv->disp_thread[i].thread,
> - SCHED_FIFO, ¶m);
> - if (ret)
> - pr_warn("display thread priority update failed: %d\n",
> - ret);
> -
> if (IS_ERR(priv->disp_thread[i].thread)) {
> dev_err(dev, "failed to create crtc_commit kthread\n");
> priv->disp_thread[i].thread = NULL;
> + goto err_msm_uninit;
> }
>
> + ret = sched_setscheduler(priv->disp_thread[i].thread,
> + SCHED_FIFO, ¶m);
> + if (ret)
> + pr_warn("display thread priority update failed: %d\n",
> + ret);
dev_warn is better
> +
> /* initialize event thread */
> priv->event_thread[i].crtc_id = priv->crtcs[i]->base.id;
> kthread_init_worker(&priv->event_thread[i].worker);
> @@ -572,6 +573,12 @@ static int msm_drm_init(struct device *dev,
> struct drm_driver *drv)
> kthread_run(kthread_worker_fn,
> &priv->event_thread[i].worker,
> "crtc_event:%d", priv->event_thread[i].crtc_id);
> + if (IS_ERR(priv->event_thread[i].thread)) {
> + dev_err(dev, "failed to create crtc_event kthread\n");
> + priv->event_thread[i].thread = NULL;
> + goto err_msm_uninit;
> + }
> +
> /**
> * event thread should also run at same priority as disp_thread
> * because it is handling frame_done events. A lower priority
> @@ -580,34 +587,10 @@ static int msm_drm_init(struct device *dev,
> struct drm_driver *drv)
> * failure at crtc commit level.
> */
> ret = sched_setscheduler(priv->event_thread[i].thread,
> - SCHED_FIFO, ¶m);
> + SCHED_FIFO, ¶m);
> if (ret)
> - pr_warn("display event thread priority update failed: %d\n",
> - ret);
same as above
> -
> - if (IS_ERR(priv->event_thread[i].thread)) {
> - dev_err(dev, "failed to create crtc_event kthread\n");
> - priv->event_thread[i].thread = NULL;
> - }
> -
> - if ((!priv->disp_thread[i].thread) ||
> - !priv->event_thread[i].thread) {
> - /* clean up previously created threads if any */
> - for ( ; i >= 0; i--) {
> - if (priv->disp_thread[i].thread) {
> - kthread_stop(
> - priv->disp_thread[i].thread);
> - priv->disp_thread[i].thread = NULL;
> - }
> -
> - if (priv->event_thread[i].thread) {
> - kthread_stop(
> - priv->event_thread[i].thread);
> - priv->event_thread[i].thread = NULL;
> - }
> - }
> - goto err_msm_uninit;
> - }
> + pr_warn("display event thread priority update failed:%d\n",
> + ret);
> }
same here
>
> ret = drm_vblank_init(ddev, priv->num_crtcs);
_______________________________________________
Freedreno mailing list
Freedreno@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/freedreno
prev parent reply other threads:[~2018-10-05 20:50 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-10-05 19:49 [PATCH] drm/msm: validate display and event threads Jeykumar Sankaran
[not found] ` <1538768955-10000-1-git-send-email-jsanka-sgV2jX0FEOL9JmXXK+q4OQ@public.gmane.org>
2018-10-05 20:50 ` Abhinav Kumar [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=cb0ef7d83957f70f323c871603dc1345@codeaurora.org \
--to=abhinavk-sgv2jx0feol9jmxxk+q4oq@public.gmane.org \
--cc=dan.carpenter-QHcLZuEGTsvQT0dZR+AlfA@public.gmane.org \
--cc=dri-devel-PD4FTy7X32lNgt0PjOBp9y5qC8QIuHrW@public.gmane.org \
--cc=freedreno-PD4FTy7X32lNgt0PjOBp9y5qC8QIuHrW@public.gmane.org \
--cc=hoegsberg-hpIqsD4AKlfQT0dZR+AlfA@public.gmane.org \
--cc=jsanka-sgV2jX0FEOL9JmXXK+q4OQ@public.gmane.org \
--cc=linux-arm-msm-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
--cc=seanpaul-F7+t8E8rja9g9hUCZPvPmw@public.gmane.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox