Re: [PATCH 0/3] dw-hdmi: miscellaneous cleanups and fixes

[Jose Abreu <Jose.Abreu@synopsys.com>]

Hi Laurent,


Sorry for the late review.


On 11-01-2017 23:49, Laurent Pinchart wrote:
> Hello,
>
> These three small patches add to the 20 dw-hdmi patches previously submitted
> in the "[PATCH v2 00/29] R-Car Gen3 HDMI output support" series. As only
> patches 1 to 16 from that series have been approved and successfully tested
> without any reported regression on all three dw-hdmi platforms, I've decided
> to submit those three on top of the 16 first patches only and rebase the next
> 4 after fixing them (which should happen soon).
>
> Patches 1 and 2 are cleanups and don't affect the generated code. Patch 3
> is a fix that moves SVSRET setting to the right location as needed by the
> hardware (thank you Jose for reporting the problem).
>
> I plan to submit a pull request with the approved patches in the near future.
> It will include these 3 patches if they can be acked soon enough.
>
> Laurent Pinchart (3):
>   drm: bridge: dw-hdmi: Define and use macros for PHY register addresses
>   drm: bridge: dw-hdmi: Fix the name of the PHY reset macros
>   drm: bridge: dw-hdmi: Assert SVSRET before resetting the PHY

The whole patchset is: Reviewed-by: Jose Abreu <joabreu@synopsys.com>

Thanks! :)

Best regards,
Jose Miguel Abreu

>
>  drivers/gpu/drm/bridge/dw-hdmi.c | 45 ++++++++++++++------------
>  drivers/gpu/drm/bridge/dw-hdmi.h | 69 ++++++++++++++++++++++++++++++++++++++--
>  2 files changed, 92 insertions(+), 22 deletions(-)
>

_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel