Re: [PATCH v2 00/15] drm/mgag200: Convert to atomic modesetting

[Thomas Zimmermann <tzimmermann@suse.de>]

[-- Attachment #1.1.1: Type: text/plain, Size: 3529 bytes --]

Hi

Am 12.05.20 um 20:56 schrieb Sam Ravnborg:
> Hi Thomas.
> 
> On Tue, May 12, 2020 at 10:42:43AM +0200, Thomas Zimmermann wrote:
>> This patchset converts mgag200 to atomic modesetting. It uses simple
>> KMS helpers and SHMEM.
>>
>> Patch 1 removes cursor support. The HW cursor is not usable with the
>> way universal planes work.
>>
>> Patches 2 to 11 untangle the existing modesetting code into smaller
>> functions. Specifically, mode setting and plane updates are being
>> separated from each other.
>>
>> Patch 12 to 14 convert mgag200 to simple KMS helpers and enables atomic
>> mode setting.
>>
>> Atomically switching plane framebuffers, requires either source or target
>> buffer to be located at a non-0 offet. As some HW revisions seem to require
>> a framebuffer offset of 0 within the video memory, they do not work with
>> atomic modesetting. To resolve this problem, patch 15 converts mgag200
>> from VRAM helpers to SHMEM helpers. During plane updates, the content of
>> the SHMEM BO is memcpy'd to VRAM. From my observation, performance is not
>> nuch different from the original code.
>>
>> The patchset has been tested on MGA G200EH hardware.
>>
>> v2:
>> 	* rebase patchset
>> 	* replace uint{8,32}_t with u{8,32} through-out patchset
>> 	* define additional register constants
>> 	* use helper functions around bpp-shift computations
>> 	* split conversion patch
>> 	* cleanups
> With the one comment addressed patch 1-14 are now all:
> Acked-by: Sam Ravnborg <sam@ravnborg.org>

Sure, I'll add that comment. Thanks for the timely reviews.

Best regards
Thomas

> 
> I did not look at the last patch - all the memory stuff is still beyond
> me.
> 
> Nice to see this driver gettting so much love and care.
> The end result is a much nicer driver implmentation.
> 
> 	Sam
> 
>>
>> Thomas Zimmermann (15):
>>   drm/mgag200: Remove HW cursor
>>   drm/mgag200: Clean up mga_set_start_address()
>>   drm/mgag200: Clean up mga_crtc_do_set_base()
>>   drm/mgag200: Move mode-setting code into separate helper function
>>   drm/mgag200: Split MISC register update into PLL selection, SYNC and
>>     I/O
>>   drm/mgag200: Update mode registers after plane registers
>>   drm/mgag200: Set pitch in a separate helper function
>>   drm/mgag200: Set primary plane's format in separate helper function
>>   drm/mgag200: Move TAGFIFO reset into separate function
>>   drm/mgag200: Move hiprilvl setting into separate functions
>>   drm/mgag200: Move register initialization into separate function
>>   drm/mgag200: Remove out-commented suspend/resume helpers
>>   drm/mgag200: Use simple-display data structures
>>   drm/mgag200: Convert to simple KMS helper
>>   drm/mgag200: Replace VRAM helpers with SHMEM helpers
>>
>>  drivers/gpu/drm/mgag200/Kconfig        |   4 +-
>>  drivers/gpu/drm/mgag200/Makefile       |   2 +-
>>  drivers/gpu/drm/mgag200/mgag200_drv.c  |  51 +-
>>  drivers/gpu/drm/mgag200/mgag200_drv.h  |  41 +-
>>  drivers/gpu/drm/mgag200/mgag200_main.c |   5 -
>>  drivers/gpu/drm/mgag200/mgag200_mode.c | 871 ++++++++++++++-----------
>>  drivers/gpu/drm/mgag200/mgag200_reg.h  |  11 +-
>>  drivers/gpu/drm/mgag200/mgag200_ttm.c  |  28 +-
>>  8 files changed, 528 insertions(+), 485 deletions(-)
>>
>> --
>> 2.26.2

-- 
Thomas Zimmermann
Graphics Driver Developer
SUSE Software Solutions Germany GmbH
Maxfeldstr. 5, 90409 Nürnberg, Germany
(HRB 36809, AG Nürnberg)
Geschäftsführer: Felix Imendörffer


[-- Attachment #1.2: OpenPGP digital signature --]
[-- Type: application/pgp-signature, Size: 488 bytes --]

[-- Attachment #2: Type: text/plain, Size: 160 bytes --]

_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel