From: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
To: Laurent Pinchart <laurent.pinchart@ideasonboard.com>,
dri-devel@lists.freedesktop.org
Cc: intel-gfx@lists.freedesktop.org
Subject: [PATCH v4.1 4/5] drm/atomic: Convert get_existing_state callers to get_old/new_state, v4.
Date: Wed, 1 Mar 2017 10:22:10 +0100 [thread overview]
Message-ID: <df91a9f9-005e-bcbd-1f74-03c38e1e21dd@linux.intel.com> (raw)
In-Reply-To: <33099096.olWWpuyW68@avalon>
This is a straightforward conversion that converts all the users of
get_existing_state in atomic core to use get_old_state or get_new_state
Changes since v1:
- Fix using the wrong state in drm_atomic_helper_update_legacy_modeset_state.
Changes since v2:
- Use the correct state in disable_outputs()
Changes since v3:
- Rebase for link status training.
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
---
drivers/gpu/drm/drm_atomic.c | 6 ++---
drivers/gpu/drm/drm_atomic_helper.c | 47 +++++++++++++++++----------------
drivers/gpu/drm/drm_blend.c | 3 +--
drivers/gpu/drm/drm_simple_kms_helper.c | 4 +--
4 files changed, 30 insertions(+), 30 deletions(-)
diff --git a/drivers/gpu/drm/drm_atomic.c b/drivers/gpu/drm/drm_atomic.c
index 236d947011f9..9b892af7811a 100644
--- a/drivers/gpu/drm/drm_atomic.c
+++ b/drivers/gpu/drm/drm_atomic.c
@@ -1374,8 +1374,8 @@ drm_atomic_set_crtc_for_connector(struct drm_connector_state *conn_state,
return 0;
if (conn_state->crtc) {
- crtc_state = drm_atomic_get_existing_crtc_state(conn_state->state,
- conn_state->crtc);
+ crtc_state = drm_atomic_get_new_crtc_state(conn_state->state,
+ conn_state->crtc);
crtc_state->connector_mask &=
~(1 << drm_connector_index(conn_state->connector));
@@ -1492,7 +1492,7 @@ drm_atomic_add_affected_planes(struct drm_atomic_state *state,
{
struct drm_plane *plane;
- WARN_ON(!drm_atomic_get_existing_crtc_state(state, crtc));
+ WARN_ON(!drm_atomic_get_new_crtc_state(state, crtc));
drm_for_each_plane_mask(plane, state->dev, crtc->state->plane_mask) {
struct drm_plane_state *plane_state =
diff --git a/drivers/gpu/drm/drm_atomic_helper.c b/drivers/gpu/drm/drm_atomic_helper.c
index bc96d31bd388..4e26b73bb0d5 100644
--- a/drivers/gpu/drm/drm_atomic_helper.c
+++ b/drivers/gpu/drm/drm_atomic_helper.c
@@ -70,8 +70,8 @@ drm_atomic_helper_plane_changed(struct drm_atomic_state *state,
struct drm_crtc_state *crtc_state;
if (old_plane_state->crtc) {
- crtc_state = drm_atomic_get_existing_crtc_state(state,
- old_plane_state->crtc);
+ crtc_state = drm_atomic_get_new_crtc_state(state,
+ old_plane_state->crtc);
if (WARN_ON(!crtc_state))
return;
@@ -80,8 +80,7 @@ drm_atomic_helper_plane_changed(struct drm_atomic_state *state,
}
if (plane_state->crtc) {
- crtc_state = drm_atomic_get_existing_crtc_state(state,
- plane_state->crtc);
+ crtc_state = drm_atomic_get_new_crtc_state(state, plane_state->crtc);
if (WARN_ON(!crtc_state))
return;
@@ -150,7 +149,7 @@ static int handle_conflicting_encoders(struct drm_atomic_state *state,
drm_for_each_connector_iter(connector, &conn_iter) {
struct drm_crtc_state *crtc_state;
- if (drm_atomic_get_existing_connector_state(state, connector))
+ if (drm_atomic_get_new_connector_state(state, connector))
continue;
encoder = connector->state->best_encoder;
@@ -178,7 +177,7 @@ static int handle_conflicting_encoders(struct drm_atomic_state *state,
new_conn_state->crtc->base.id, new_conn_state->crtc->name,
connector->base.id, connector->name);
- crtc_state = drm_atomic_get_existing_crtc_state(state, new_conn_state->crtc);
+ crtc_state = drm_atomic_get_new_crtc_state(state, new_conn_state->crtc);
ret = drm_atomic_set_crtc_for_connector(new_conn_state, NULL);
if (ret)
@@ -219,7 +218,7 @@ set_best_encoder(struct drm_atomic_state *state,
*/
WARN_ON(!crtc && encoder != conn_state->best_encoder);
if (crtc) {
- crtc_state = drm_atomic_get_existing_crtc_state(state, crtc);
+ crtc_state = drm_atomic_get_new_crtc_state(state, crtc);
crtc_state->encoder_mask &=
~(1 << drm_encoder_index(conn_state->best_encoder));
@@ -230,7 +229,7 @@ set_best_encoder(struct drm_atomic_state *state,
crtc = conn_state->crtc;
WARN_ON(!crtc);
if (crtc) {
- crtc_state = drm_atomic_get_existing_crtc_state(state, crtc);
+ crtc_state = drm_atomic_get_new_crtc_state(state, crtc);
crtc_state->encoder_mask |=
1 << drm_encoder_index(encoder);
@@ -263,7 +262,7 @@ steal_encoder(struct drm_atomic_state *state,
set_best_encoder(state, new_connector_state, NULL);
- crtc_state = drm_atomic_get_existing_crtc_state(state, encoder_crtc);
+ crtc_state = drm_atomic_get_new_crtc_state(state, encoder_crtc);
crtc_state->connectors_changed = true;
return;
@@ -286,12 +285,12 @@ update_connector_routing(struct drm_atomic_state *state,
if (old_connector_state->crtc != new_connector_state->crtc) {
if (old_connector_state->crtc) {
- crtc_state = drm_atomic_get_existing_crtc_state(state, old_connector_state->crtc);
+ crtc_state = drm_atomic_get_new_crtc_state(state, old_connector_state->crtc);
crtc_state->connectors_changed = true;
}
if (new_connector_state->crtc) {
- crtc_state = drm_atomic_get_existing_crtc_state(state, new_connector_state->crtc);
+ crtc_state = drm_atomic_get_new_crtc_state(state, new_connector_state->crtc);
crtc_state->connectors_changed = true;
}
}
@@ -350,7 +349,7 @@ update_connector_routing(struct drm_atomic_state *state,
set_best_encoder(state, new_connector_state, new_encoder);
- crtc_state = drm_atomic_get_existing_crtc_state(state, new_connector_state->crtc);
+ crtc_state = drm_atomic_get_new_crtc_state(state, new_connector_state->crtc);
crtc_state->connectors_changed = true;
DRM_DEBUG_ATOMIC("[CONNECTOR:%d:%s] using [ENCODER:%d:%s] on [CRTC:%d:%s]\n",
@@ -392,7 +391,7 @@ mode_fixup(struct drm_atomic_state *state)
continue;
new_crtc_state =
- drm_atomic_get_existing_crtc_state(state, new_conn_state->crtc);
+ drm_atomic_get_new_crtc_state(state, new_conn_state->crtc);
/*
* Each encoder has at most one connector (since we always steal
@@ -534,8 +533,8 @@ drm_atomic_helper_check_modeset(struct drm_device *dev,
if (ret)
return ret;
if (old_connector_state->crtc) {
- new_crtc_state = drm_atomic_get_existing_crtc_state(state,
- old_connector_state->crtc);
+ new_crtc_state = drm_atomic_get_new_crtc_state(state,
+ old_connector_state->crtc);
if (old_connector_state->link_status !=
new_connector_state->link_status)
new_crtc_state->connectors_changed = true;
@@ -711,8 +710,7 @@ disable_outputs(struct drm_device *dev, struct drm_atomic_state *old_state)
if (!old_conn_state->crtc)
continue;
- old_crtc_state = drm_atomic_get_existing_crtc_state(old_state,
- old_conn_state->crtc);
+ old_crtc_state = drm_atomic_get_old_crtc_state(old_state, old_conn_state->crtc);
if (!old_crtc_state->active ||
!drm_atomic_crtc_needs_modeset(old_conn_state->crtc->state))
@@ -841,14 +839,17 @@ drm_atomic_helper_update_legacy_modeset_state(struct drm_device *dev,
/* set legacy state in the crtc structure */
for_each_new_crtc_in_state(old_state, crtc, new_crtc_state, i) {
struct drm_plane *primary = crtc->primary;
+ struct drm_plane_state *new_plane_state;
crtc->mode = new_crtc_state->mode;
crtc->enabled = new_crtc_state->enable;
- if (drm_atomic_get_existing_plane_state(old_state, primary) &&
- primary->state->crtc == crtc) {
- crtc->x = primary->state->src_x >> 16;
- crtc->y = primary->state->src_y >> 16;
+ new_plane_state =
+ drm_atomic_get_new_plane_state(old_state, primary);
+
+ if (new_plane_state && new_plane_state->crtc == crtc) {
+ crtc->x = new_plane_state->src_x >> 16;
+ crtc->y = new_plane_state->src_y >> 16;
}
if (new_crtc_state->enable)
@@ -1850,7 +1851,7 @@ drm_atomic_helper_commit_planes_on_crtc(struct drm_crtc_state *old_crtc_state)
drm_for_each_plane_mask(plane, crtc->dev, plane_mask) {
struct drm_plane_state *old_plane_state =
- drm_atomic_get_existing_plane_state(old_state, plane);
+ drm_atomic_get_old_plane_state(old_state, plane);
const struct drm_plane_helper_funcs *plane_funcs;
plane_funcs = plane->helper_private;
@@ -2953,7 +2954,7 @@ int drm_atomic_helper_page_flip_target(
if (ret != 0)
goto fail;
- crtc_state = drm_atomic_get_existing_crtc_state(state, crtc);
+ crtc_state = drm_atomic_get_new_crtc_state(state, crtc);
if (WARN_ON(!crtc_state)) {
ret = -EINVAL;
goto fail;
diff --git a/drivers/gpu/drm/drm_blend.c b/drivers/gpu/drm/drm_blend.c
index 665aafc6ad68..d7053bb67db6 100644
--- a/drivers/gpu/drm/drm_blend.c
+++ b/drivers/gpu/drm/drm_blend.c
@@ -387,8 +387,7 @@ int drm_atomic_normalize_zpos(struct drm_device *dev,
if (!crtc)
continue;
if (plane->state->zpos != plane_state->zpos) {
- crtc_state =
- drm_atomic_get_existing_crtc_state(state, crtc);
+ crtc_state = drm_atomic_get_new_crtc_state(state, crtc);
crtc_state->zpos_changed = true;
}
}
diff --git a/drivers/gpu/drm/drm_simple_kms_helper.c b/drivers/gpu/drm/drm_simple_kms_helper.c
index 35c5d99296b9..16789faa9291 100644
--- a/drivers/gpu/drm/drm_simple_kms_helper.c
+++ b/drivers/gpu/drm/drm_simple_kms_helper.c
@@ -86,8 +86,8 @@ static int drm_simple_kms_plane_atomic_check(struct drm_plane *plane,
int ret;
pipe = container_of(plane, struct drm_simple_display_pipe, plane);
- crtc_state = drm_atomic_get_existing_crtc_state(plane_state->state,
- &pipe->crtc);
+ crtc_state = drm_atomic_get_new_crtc_state(plane_state->state,
+ &pipe->crtc);
if (crtc_state->enable != !!plane_state->crtc)
return -EINVAL; /* plane must match crtc enable state */
--
2.7.4
_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel
next prev parent reply other threads:[~2017-03-01 9:22 UTC|newest]
Thread overview: 15+ messages / expand[flat|nested] mbox.gz Atom feed top
2017-02-16 14:47 [PATCH v4 0/5] drm/atomic: Add accessor macros for all atomic state Maarten Lankhorst
2017-02-16 14:47 ` [PATCH v4 1/5] drm/atomic: Fix atomic helpers to use the new iterator macros, v2 Maarten Lankhorst
2017-03-01 0:49 ` Laurent Pinchart
2017-03-01 9:09 ` Maarten Lankhorst
2017-03-01 9:21 ` [PATCH v4.1 1/5] drm/atomic: Fix atomic helpers to use the new iterator macros, v3 Maarten Lankhorst
2017-03-01 10:06 ` Laurent Pinchart
2017-02-16 14:47 ` [PATCH v4 2/5] drm/atomic: Make drm_atomic_plane_disabling easier to understand Maarten Lankhorst
2017-03-01 0:53 ` Laurent Pinchart
2017-02-16 14:47 ` [PATCH v4 3/5] drm/atomic: Add macros to access existing old/new state, v2 Maarten Lankhorst
2017-03-01 0:56 ` Laurent Pinchart
2017-02-16 14:47 ` [PATCH v4 4/5] drm/atomic: Convert get_existing_state callers to get_old/new_state, v3 Maarten Lankhorst
2017-03-01 1:04 ` Laurent Pinchart
2017-03-01 9:22 ` Maarten Lankhorst [this message]
2017-02-16 14:47 ` [PATCH v4 5/5] drm/blend: Use new atomic iterator macros Maarten Lankhorst
2017-03-01 0:58 ` Laurent Pinchart
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=df91a9f9-005e-bcbd-1f74-03c38e1e21dd@linux.intel.com \
--to=maarten.lankhorst@linux.intel.com \
--cc=dri-devel@lists.freedesktop.org \
--cc=intel-gfx@lists.freedesktop.org \
--cc=laurent.pinchart@ideasonboard.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).