From: Icenowy Zheng <zhengxingda@iscas.ac.cn>
To: Joey Lu <a0987203069@gmail.com>,
maarten.lankhorst@linux.intel.com, mripard@kernel.org,
tzimmermann@suse.de, airlied@gmail.com, simona@ffwll.ch,
robh@kernel.org, krzk+dt@kernel.org, conor+dt@kernel.org
Cc: ychuang3@nuvoton.com, schung@nuvoton.com, yclu4@nuvoton.com,
dri-devel@lists.freedesktop.org, devicetree@vger.kernel.org,
linux-arm-kernel@lists.infradead.org,
linux-kernel@vger.kernel.org
Subject: Re: [PATCH v6 4/6] drm/verisilicon: add DC8000 (DCUltraLite) display controller support
Date: Thu, 10 Sep 2026 15:25:16 +0800 [thread overview]
Message-ID: <e66fdb299d87ffdfea1c871cfeab88eeed7755ce.camel@iscas.ac.cn> (raw)
In-Reply-To: <20260908092840.225220-5-a0987203069@gmail.com>
在 2026-09-08二的 17:28 +0800,Joey Lu写道:
> The Verisilicon DC IP family also ships in a DCUltraLite (DC8000
> generation) configuration that lacks the DC8200's CONFIG_EX staging
> registers and PANEL_START sync register, and exposes its VSYNC
> interrupt through a differently laid out status/enable register pair.
>
> Add a vs_dc_funcs implementation for the DC8000 generation in
> vs_dc8000.c: framebuffer updates are latched directly through
> FB_CONFIG's enable/reset/valid bits instead of a staging commit,
> panel
> output starts as soon as PANEL_CONFIG.RUNNING is set with no separate
> sync register to arm, and the VSYNC interrupt is acknowledged through
> DISP_IRQ_STA/DISP_IRQ_EN. Select this vtable in the probe path based
> on the chip identity's generation field.
>
> Signed-off-by: Joey Lu <a0987203069@gmail.com>
Reviewed-by: Icenowy Zheng <zhengxingda@iscas.ac.cn>
Thanks,
Icenowy
> ---
> drivers/gpu/drm/verisilicon/Makefile | 2 +-
> drivers/gpu/drm/verisilicon/vs_dc.c | 5 +-
> drivers/gpu/drm/verisilicon/vs_dc.h | 1 +
> drivers/gpu/drm/verisilicon/vs_dc8000.c | 92
> +++++++++++++++++++++++++
> 4 files changed, 98 insertions(+), 2 deletions(-)
> create mode 100644 drivers/gpu/drm/verisilicon/vs_dc8000.c
>
> diff --git a/drivers/gpu/drm/verisilicon/Makefile
> b/drivers/gpu/drm/verisilicon/Makefile
> index 9d4cd16452fa1..d2fd8e4dff242 100644
> --- a/drivers/gpu/drm/verisilicon/Makefile
> +++ b/drivers/gpu/drm/verisilicon/Makefile
> @@ -1,6 +1,6 @@
> # SPDX-License-Identifier: GPL-2.0-only
>
> -verisilicon-dc-objs := vs_bridge.o vs_crtc.o vs_dc.o vs_dc8200.o
> vs_drm.o vs_hwdb.o \
> +verisilicon-dc-objs := vs_bridge.o vs_crtc.o vs_dc.o vs_dc8200.o
> vs_dc8000.o vs_drm.o vs_hwdb.o \
> vs_plane.o vs_primary_plane.o vs_cursor_plane.o
>
> obj-$(CONFIG_DRM_VERISILICON_DC) += verisilicon-dc.o
> diff --git a/drivers/gpu/drm/verisilicon/vs_dc.c
> b/drivers/gpu/drm/verisilicon/vs_dc.c
> index 9729b693d360e..3e9e2c0264f5d 100644
> --- a/drivers/gpu/drm/verisilicon/vs_dc.c
> +++ b/drivers/gpu/drm/verisilicon/vs_dc.c
> @@ -134,7 +134,10 @@ static int vs_dc_probe(struct platform_device
> *pdev)
> dev_info(dev, "Found DC%x rev %x customer %x\n", dc-
> >identity.model,
> dc->identity.revision, dc->identity.customer_id);
>
> - dc->funcs = &vs_dc8200_funcs;
> + if (dc->identity.generation == VSDC_GEN_DC8200)
> + dc->funcs = &vs_dc8200_funcs;
> + else
> + dc->funcs = &vs_dc8000_funcs;
>
> if (port_count > dc->identity.display_count) {
> dev_err(dev, "too many downstream ports than HW
> capability\n");
> diff --git a/drivers/gpu/drm/verisilicon/vs_dc.h
> b/drivers/gpu/drm/verisilicon/vs_dc.h
> index 825f5dd6bf174..ac96ad7011994 100644
> --- a/drivers/gpu/drm/verisilicon/vs_dc.h
> +++ b/drivers/gpu/drm/verisilicon/vs_dc.h
> @@ -66,5 +66,6 @@ struct vs_dc {
> };
>
> extern const struct vs_dc_funcs vs_dc8200_funcs;
> +extern const struct vs_dc_funcs vs_dc8000_funcs;
>
> #endif /* _VS_DC_H_ */
> diff --git a/drivers/gpu/drm/verisilicon/vs_dc8000.c
> b/drivers/gpu/drm/verisilicon/vs_dc8000.c
> new file mode 100644
> index 0000000000000..df7bd5bdd7f2a
> --- /dev/null
> +++ b/drivers/gpu/drm/verisilicon/vs_dc8000.c
> @@ -0,0 +1,92 @@
> +// SPDX-License-Identifier: GPL-2.0-only
> +/*
> + * Copyright (C) 2026 Joey Lu <yclu4@nuvoton.com>
> + */
> +
> +#include <linux/regmap.h>
> +
> +#include <drm/drm_print.h>
> +
> +#include "vs_crtc_regs.h"
> +#include "vs_dc.h"
> +#include "vs_drm.h"
> +#include "vs_primary_plane_regs.h"
> +
> +static void vs_dc8000_panel_enable_ex(struct vs_dc *dc, unsigned int
> output)
> +{
> + regmap_set_bits(dc->regs, VSDC_FB_CONFIG(output),
> + VSDC_FB_CONFIG_RESET);
> +}
> +
> +static void vs_dc8000_panel_disable_ex(struct vs_dc *dc, unsigned
> int output)
> +{
> + regmap_clear_bits(dc->regs, VSDC_FB_CONFIG(output),
> + VSDC_FB_CONFIG_RESET);
> +}
> +
> +static void vs_dc8000_crtc_begin(struct vs_dc *dc, unsigned int
> output)
> +{
> + regmap_set_bits(dc->regs, VSDC_FB_CONFIG(output),
> + VSDC_FB_CONFIG_VALID);
> +}
> +
> +static void vs_dc8000_crtc_flush(struct vs_dc *dc, unsigned int
> output)
> +{
> + regmap_clear_bits(dc->regs, VSDC_FB_CONFIG(output),
> + VSDC_FB_CONFIG_VALID);
> +}
> +
> +static void vs_dc8000_crtc_enable_ex(struct vs_dc *dc, unsigned int
> output)
> +{
> + regmap_set_bits(dc->regs, VSDC_FB_CONFIG(output),
> + VSDC_FB_CONFIG_ENABLE);
> +}
> +
> +static void vs_dc8000_crtc_disable_ex(struct vs_dc *dc, unsigned int
> output)
> +{
> + regmap_clear_bits(dc->regs, VSDC_FB_CONFIG(output),
> + VSDC_FB_CONFIG_ENABLE);
> +}
> +
> +static void vs_dc8000_enable_vblank(struct vs_dc *dc, unsigned int
> output)
> +{
> + regmap_set_bits(dc->regs, VSDC_DISP_IRQ_EN,
> + VSDC_DISP_IRQ_VSYNC(output));
> +}
> +
> +static void vs_dc8000_disable_vblank(struct vs_dc *dc, unsigned int
> output)
> +{
> + regmap_clear_bits(dc->regs, VSDC_DISP_IRQ_EN,
> + VSDC_DISP_IRQ_VSYNC(output));
> +}
> +
> +static u32 vs_dc8000_irq_ack(struct vs_dc *dc)
> +{
> + u32 hw_irqs, unified = 0, known = 0;
> + unsigned int i;
> +
> + regmap_read(dc->regs, VSDC_DISP_IRQ_STA, &hw_irqs);
> +
> + for (i = 0; i < VSDC_MAX_OUTPUTS; i++) {
> + known |= VSDC_DISP_IRQ_VSYNC(i);
> + if (hw_irqs & VSDC_DISP_IRQ_VSYNC(i))
> + unified |= VSDC_IRQ_VSYNC(i);
> + }
> +
> + drm_WARN_ONCE(&dc->drm_dev->base, hw_irqs & ~known,
> + "Unknown hardware IRQ bits: %#x\n", hw_irqs &
> ~known);
> +
> + return unified;
> +}
> +
> +const struct vs_dc_funcs vs_dc8000_funcs = {
> + .panel_enable_ex = vs_dc8000_panel_enable_ex,
> + .panel_disable_ex = vs_dc8000_panel_disable_ex,
> + .crtc_begin = vs_dc8000_crtc_begin,
> + .crtc_flush = vs_dc8000_crtc_flush,
> + .crtc_enable_ex = vs_dc8000_crtc_enable_ex,
> + .crtc_disable_ex = vs_dc8000_crtc_disable_ex,
> + .enable_vblank = vs_dc8000_enable_vblank,
> + .disable_vblank = vs_dc8000_disable_vblank,
> + .irq_ack = vs_dc8000_irq_ack,
> +};
next prev parent reply other threads:[~2026-09-10 7:25 UTC|newest]
Thread overview: 17+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-09-08 9:28 [PATCH v6 0/6] drm/verisilicon: add Nuvoton MA35D1 DCU Lite support Joey Lu
2026-09-08 9:28 ` [PATCH v6 1/6] dt-bindings: display: verisilicon, dc: add support for nuvoton, ma35d1-dcu Joey Lu
2026-09-08 9:36 ` [PATCH v6 1/6] dt-bindings: display: verisilicon,dc: add support for nuvoton,ma35d1-dcu sashiko-bot
2026-09-08 17:55 ` [PATCH v6 1/6] dt-bindings: display: verisilicon, dc: " Conor Dooley
2026-09-09 5:44 ` [PATCH v6 1/6] dt-bindings: display: verisilicon,dc: " Icenowy Zheng
2026-09-10 1:52 ` [PATCH v6 1/6] dt-bindings: display: verisilicon, dc: " Joey Lu
2026-09-10 7:08 ` [PATCH v6 1/6] dt-bindings: display: verisilicon,dc: " Icenowy Zheng
2026-09-08 9:28 ` [PATCH v6 2/6] drm/verisilicon: add register-level macros for DC8000 Joey Lu
2026-09-08 9:28 ` [PATCH v6 3/6] drm/verisilicon: introduce per-variant hardware ops table Joey Lu
2026-09-08 9:51 ` sashiko-bot
2026-09-08 9:28 ` [PATCH v6 4/6] drm/verisilicon: add DC8000 (DCUltraLite) display controller support Joey Lu
2026-09-08 10:04 ` sashiko-bot
2026-09-10 7:25 ` Icenowy Zheng [this message]
2026-09-08 9:28 ` [PATCH v6 5/6] drm/verisilicon: add DCUltraLite chip identity to HWDB Joey Lu
2026-09-08 10:15 ` sashiko-bot
2026-09-08 9:28 ` [PATCH v6 6/6] drm/verisilicon: extend Kconfig to support ARCH_MA35 platforms Joey Lu
2026-09-08 10:25 ` sashiko-bot
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=e66fdb299d87ffdfea1c871cfeab88eeed7755ce.camel@iscas.ac.cn \
--to=zhengxingda@iscas.ac.cn \
--cc=a0987203069@gmail.com \
--cc=airlied@gmail.com \
--cc=conor+dt@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=dri-devel@lists.freedesktop.org \
--cc=krzk+dt@kernel.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=maarten.lankhorst@linux.intel.com \
--cc=mripard@kernel.org \
--cc=robh@kernel.org \
--cc=schung@nuvoton.com \
--cc=simona@ffwll.ch \
--cc=tzimmermann@suse.de \
--cc=ychuang3@nuvoton.com \
--cc=yclu4@nuvoton.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox