dri-devel Archive on lore.kernel.org
 help / color / mirror / Atom feed
From: Thomas Zimmermann <tzimmermann@suse.de>
To: Sam Ravnborg <sam@ravnborg.org>, dri-devel@lists.freedesktop.org
Cc: David Airlie <airlied@linux.ie>
Subject: Re: [PATCH v2 1/4] drm/mga: drop dependency on drm_os_linux.h
Date: Sun, 30 Jun 2019 09:32:46 +0200	[thread overview]
Message-ID: <eba80da4-8fe4-394e-426d-8085d5ae9442@suse.de> (raw)
In-Reply-To: <20190629175958.GA18538@ravnborg.org>


[-- Attachment #1.1.1: Type: text/plain, Size: 7525 bytes --]

Hi

Am 29.06.19 um 19:59 schrieb Sam Ravnborg:
> Hi all.
> 
>> Opencode all macros used from the deprecated drm_os_linux.h header file.
>> The DRM_WAIT_ON used 3 * HZ as timeout.
>> This was translated to 3000 msec.
>>
>> The return value of mga_driver_fence_wait() was not
>> used, so make it return void to simplify code a bit.
>>
>> v2:
>> - fixed timeout to 3000 msec (original value was 3 * Hz)
>> - drop unused return value from mga_driver_fence_wait()
> 
> Thomas give his ack on v1 of this patch.
> But I am reluctant to apply it until someone has looked at this version.
> The main difference is a s described above, where the change to 3000
> msec was a bug in v1.
> 
> Any feedback?

Acked-by: Thomas Zimmermann <tzimmermann@suse.de>

as well. Thanks for spotting the bug.

Best regards
Thomas

> 
> 	Sam
> 
>>
>> Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
>> Acked-by: Thomas Zimmermann <tzimmermann@suse.de>
>> Cc: Daniel Vetter <daniel@ffwll.ch>
>> Cc: David Airlie <airlied@linux.ie>
>> ---
>>  drivers/gpu/drm/mga/mga_dma.c   | 11 +++++++----
>>  drivers/gpu/drm/mga/mga_drv.h   | 14 +++++++++-----
>>  drivers/gpu/drm/mga/mga_irq.c   | 10 ++++------
>>  drivers/gpu/drm/mga/mga_state.c |  6 +++---
>>  4 files changed, 23 insertions(+), 18 deletions(-)
>>
>> diff --git a/drivers/gpu/drm/mga/mga_dma.c b/drivers/gpu/drm/mga/mga_dma.c
>> index 1ffdafea27e4..c5e7c210999f 100644
>> --- a/drivers/gpu/drm/mga/mga_dma.c
>> +++ b/drivers/gpu/drm/mga/mga_dma.c
>> @@ -35,6 +35,8 @@
>>   * \author Gareth Hughes <gareth@valinux.com>
>>   */
>>  
>> +#include <linux/delay.h>
>> +
>>  #include <drm/drmP.h>
>>  #include <drm/mga_drm.h>
>>  #include "mga_drv.h"
>> @@ -62,7 +64,7 @@ int mga_do_wait_for_idle(drm_mga_private_t *dev_priv)
>>  			MGA_WRITE8(MGA_CRTC_INDEX, 0);
>>  			return 0;
>>  		}
>> -		DRM_UDELAY(1);
>> +		udelay(1);
>>  	}
>>  
>>  #if MGA_DMA_DEBUG
>> @@ -114,7 +116,7 @@ void mga_do_dma_flush(drm_mga_private_t *dev_priv)
>>  		status = MGA_READ(MGA_STATUS) & MGA_ENGINE_IDLE_MASK;
>>  		if (status == MGA_ENDPRDMASTS)
>>  			break;
>> -		DRM_UDELAY(1);
>> +		udelay(1);
>>  	}
>>  
>>  	if (primary->tail == primary->last_flush) {
>> @@ -1120,7 +1122,7 @@ int mga_dma_buffers(struct drm_device *dev, void *data,
>>  	 */
>>  	if (d->send_count != 0) {
>>  		DRM_ERROR("Process %d trying to send %d buffers via drmDMA\n",
>> -			  DRM_CURRENTPID, d->send_count);
>> +			  task_pid_nr(current), d->send_count);
>>  		return -EINVAL;
>>  	}
>>  
>> @@ -1128,7 +1130,8 @@ int mga_dma_buffers(struct drm_device *dev, void *data,
>>  	 */
>>  	if (d->request_count < 0 || d->request_count > dma->buf_count) {
>>  		DRM_ERROR("Process %d trying to get %d buffers (of %d max)\n",
>> -			  DRM_CURRENTPID, d->request_count, dma->buf_count);
>> +			  task_pid_nr(current), d->request_count,
>> +			  dma->buf_count);
>>  		return -EINVAL;
>>  	}
>>  
>> diff --git a/drivers/gpu/drm/mga/mga_drv.h b/drivers/gpu/drm/mga/mga_drv.h
>> index a45bb22275a7..1766c195b397 100644
>> --- a/drivers/gpu/drm/mga/mga_drv.h
>> +++ b/drivers/gpu/drm/mga/mga_drv.h
>> @@ -188,7 +188,7 @@ extern int mga_warp_init(drm_mga_private_t *dev_priv);
>>  extern int mga_enable_vblank(struct drm_device *dev, unsigned int pipe);
>>  extern void mga_disable_vblank(struct drm_device *dev, unsigned int pipe);
>>  extern u32 mga_get_vblank_counter(struct drm_device *dev, unsigned int pipe);
>> -extern int mga_driver_fence_wait(struct drm_device *dev, unsigned int *sequence);
>> +extern void mga_driver_fence_wait(struct drm_device *dev, unsigned int *sequence);
>>  extern int mga_driver_vblank_wait(struct drm_device *dev, unsigned int *sequence);
>>  extern irqreturn_t mga_driver_irq_handler(int irq, void *arg);
>>  extern void mga_driver_irq_preinstall(struct drm_device *dev);
>> @@ -199,10 +199,14 @@ extern long mga_compat_ioctl(struct file *filp, unsigned int cmd,
>>  
>>  #define mga_flush_write_combine()	wmb()
>>  
>> -#define MGA_READ8(reg)		DRM_READ8(dev_priv->mmio, (reg))
>> -#define MGA_READ(reg)		DRM_READ32(dev_priv->mmio, (reg))
>> -#define MGA_WRITE8(reg, val)	DRM_WRITE8(dev_priv->mmio, (reg), (val))
>> -#define MGA_WRITE(reg, val)	DRM_WRITE32(dev_priv->mmio, (reg), (val))
>> +#define MGA_READ8(reg) \
>> +	readb(((void __iomem *)dev_priv->mmio->handle) + (reg))
>> +#define MGA_READ(reg) \
>> +	readl(((void __iomem *)dev_priv->mmio->handle) + (reg))
>> +#define MGA_WRITE8(reg, val) \
>> +	writeb(val, ((void __iomem *)dev_priv->mmio->handle) + (reg))
>> +#define MGA_WRITE(reg, val) \
>> +	writel(val, ((void __iomem *)dev_priv->mmio->handle) + (reg))
>>  
>>  #define DWGREG0		0x1c00
>>  #define DWGREG0_END	0x1dff
>> diff --git a/drivers/gpu/drm/mga/mga_irq.c b/drivers/gpu/drm/mga/mga_irq.c
>> index 693ba708cfed..1545a3694b53 100644
>> --- a/drivers/gpu/drm/mga/mga_irq.c
>> +++ b/drivers/gpu/drm/mga/mga_irq.c
>> @@ -118,23 +118,21 @@ void mga_disable_vblank(struct drm_device *dev, unsigned int pipe)
>>  	/* MGA_WRITE(MGA_IEN, MGA_VLINEIEN | MGA_SOFTRAPEN); */
>>  }
>>  
>> -int mga_driver_fence_wait(struct drm_device *dev, unsigned int *sequence)
>> +void mga_driver_fence_wait(struct drm_device *dev, unsigned int *sequence)
>>  {
>>  	drm_mga_private_t *dev_priv = (drm_mga_private_t *) dev->dev_private;
>>  	unsigned int cur_fence;
>> -	int ret = 0;
>>  
>>  	/* Assume that the user has missed the current sequence number
>>  	 * by about a day rather than she wants to wait for years
>>  	 * using fences.
>>  	 */
>> -	DRM_WAIT_ON(ret, dev_priv->fence_queue, 3 * HZ,
>> +	wait_event_timeout(dev_priv->fence_queue,
>>  		    (((cur_fence = atomic_read(&dev_priv->last_fence_retired))
>> -		      - *sequence) <= (1 << 23)));
>> +		      - *sequence) <= (1 << 23)),
>> +		    msecs_to_jiffies(3000));
>>  
>>  	*sequence = cur_fence;
>> -
>> -	return ret;
>>  }
>>  
>>  void mga_driver_irq_preinstall(struct drm_device *dev)
>> diff --git a/drivers/gpu/drm/mga/mga_state.c b/drivers/gpu/drm/mga/mga_state.c
>> index e5f6b735f575..296a1db7e5ee 100644
>> --- a/drivers/gpu/drm/mga/mga_state.c
>> +++ b/drivers/gpu/drm/mga/mga_state.c
>> @@ -1016,7 +1016,7 @@ int mga_getparam(struct drm_device *dev, void *data, struct drm_file *file_priv)
>>  		return -EINVAL;
>>  	}
>>  
>> -	DRM_DEBUG("pid=%d\n", DRM_CURRENTPID);
>> +	DRM_DEBUG("pid=%d\n", task_pid_nr(current));
>>  
>>  	switch (param->param) {
>>  	case MGA_PARAM_IRQ_NR:
>> @@ -1048,7 +1048,7 @@ static int mga_set_fence(struct drm_device *dev, void *data, struct drm_file *fi
>>  		return -EINVAL;
>>  	}
>>  
>> -	DRM_DEBUG("pid=%d\n", DRM_CURRENTPID);
>> +	DRM_DEBUG("pid=%d\n", task_pid_nr(current));
>>  
>>  	/* I would normal do this assignment in the declaration of fence,
>>  	 * but dev_priv may be NULL.
>> @@ -1077,7 +1077,7 @@ file_priv)
>>  		return -EINVAL;
>>  	}
>>  
>> -	DRM_DEBUG("pid=%d\n", DRM_CURRENTPID);
>> +	DRM_DEBUG("pid=%d\n", task_pid_nr(current));
>>  
>>  	mga_driver_fence_wait(dev, fence);
>>  	return 0;
>> -- 
>> 2.20.1
>>
>> _______________________________________________
>> dri-devel mailing list
>> dri-devel@lists.freedesktop.org
>> https://lists.freedesktop.org/mailman/listinfo/dri-devel

-- 
Thomas Zimmermann
Graphics Driver Developer
SUSE Linux GmbH, Maxfeldstrasse 5, 90409 Nuernberg, Germany
GF: Felix Imendörffer, Mary Higgins, Sri Rasiah
HRB 21284 (AG Nürnberg)


[-- Attachment #1.2: OpenPGP digital signature --]
[-- Type: application/pgp-signature, Size: 488 bytes --]

[-- Attachment #2: Type: text/plain, Size: 159 bytes --]

_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel

  reply	other threads:[~2019-06-30  7:32 UTC|newest]

Thread overview: 9+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2019-06-23 10:35 [PATCH v2 0/4] drm/{mga,mgag200}: drop use of drmP.h Sam Ravnborg
2019-06-23 10:35 ` [PATCH v2 1/4] drm/mga: drop dependency on drm_os_linux.h Sam Ravnborg
2019-06-29 17:59   ` Sam Ravnborg
2019-06-30  7:32     ` Thomas Zimmermann [this message]
2019-06-30  8:03       ` Sam Ravnborg
2019-07-01 10:59   ` Emil Velikov
2019-06-23 10:35 ` [PATCH v2 2/4] drm/mga: make header file self contained Sam Ravnborg
2019-06-23 10:35 ` [PATCH v2 3/4] drm/mga: drop use of drmP.h Sam Ravnborg
2019-06-23 10:35 ` [PATCH v2 4/4] drm/mgag200: " Sam Ravnborg

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=eba80da4-8fe4-394e-426d-8085d5ae9442@suse.de \
    --to=tzimmermann@suse.de \
    --cc=airlied@linux.ie \
    --cc=dri-devel@lists.freedesktop.org \
    --cc=sam@ravnborg.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox